Xilinx Inc. XCF16PVOG48C
XCF16PVOG48C
Xilinx Inc. XCF16PVOG48C information
Type
Parameter
Factory Lead Time
10 Weeks
Mounting Type
Surface Mount
Package / Case
48-TFSOP (0.724, 18.40mm Width)
Surface Mount
YES
Number of Pins
48
Operating Temperature
-40°C~85°C
Packaging
Tray
Published
1999
JESD-609 Code
e3
Pbfree Code
yes
Part Status
Active
Moisture Sensitivity Level (MSL)
3 (168 Hours)
Number of Terminations
48
ECCN Code
EAR99
Terminal Finish
Matte Tin (Sn)
HTS Code
8542.32.00.51
Technology
CMOS
Voltage - Supply
1.65V~2V
Terminal Position
DUAL
Terminal Form
GULL WING
Peak Reflow Temperature (Cel)
260
Number of Functions
1
Supply Voltage
1.8V
Terminal Pitch
0.5mm
Frequency
50MHz
Reflow Temperature-Max (s)
30
Base Part Number
XCF*P
Pin Count
48
Operating Supply Voltage
1.8V
Supply Voltage-Max (Vsup)
2V
Supply Voltage-Min (Vsup)
1.65V
Programmable Type
In System Programmable
Interface
Parallel
Memory Size
16Mb
Memory Type
FLASH
Supply Current-Max
0.04mA
Organization
16MX1
Memory Width
1
Memory Density
16777216 bit
Parallel/Serial
SERIAL
Endurance
20000 Write/Erase Cycles
Data Retention Time-Min
20
Max Junction Temperature (Tj)
125°C
Ambient Temperature Range High
85°C
Height
1.2mm
Length
18.45mm
Width
12mm
Radiation Hardening
No
REACH SVHC
Unknown
RoHS Status
ROHS3 Compliant
Lead Free
Lead Free
- Datasheets :
- Environmental Information :
- PCN Packaging :
XCF16PVOG48C Overview
This package makes use of the 48-TFSOP (0.724, 18.40mm Width) programming language.External packaging of type Tray.A qualified individual to operate within -40°C~85°C is required.In System Programmable allows for programmability.An electric current of 1.65V~2V is applied to it.This memory device is mounted in Surface Mount.Currently, data storage can only store data up to 16Mb bytes.Other components related to "XCF*P" can also be found by searching the word.The supply voltage of the device must be 1.8V in order to operate correctly.48 terminations with different functions.FPGA is possible to use this memory device at a maximum voltage of 2V.FPGA is imperative that the voltage of the device supply is at least 1.65V if the device is to work properly.Reflow soldering should be done at no higher than 260 degrees.48 pins are located on the board.In this memory, data is transmitted using the SERIAL process.A memory chip can operate at a voltage no greater than 0.04mA.The part comes with a set of 48 pins.Before using the part in a circuit, it is recommended that the user apply 1.8V before the part is used in order to ensure that it runs safely and reliably in the circuit.Memory is also referred to as a FLASH memory.A swicthing controller operates at a frequency of 50MHz.
XCF16PVOG48C Features
Operating temperature: -40°C~85°C.
In System Programmable program capability.
SERIAL processing.
FLASH memory
Frequency: 50MHz.
XCF16PVOG48C Applications
There are a lot of Xilinx Inc. XCF16PVOG48C applications of configuration proms for FPGAs.
- embedded logic
- supercomputers
- eDRAM
- graphics card
- cell phones
- mainframes
- main computer memory
- hard disk drive (HDD)
- Camcorders
- networks
- ImagePart NumberManufacturerPackage / CaseNumber of PinsFrequencyInterfaceSupply VoltageTerminal PitchSupply Voltage-Min (Vsup)PublishedView Compare
XCF16PVOG48C
Xilinx Inc.48-TFSOP (0.724, 18.40mm Width)
48
50 MHz
Parallel
1.8 V
0.5 mm
1.65 V
1999
- XCF08PVOG48CXilinx Inc.
48-TFSOP (0.724, 18.40mm Width)
48
50 MHz
Parallel
1.8 V
0.5 mm
1.65 V
1999
XCF16PVOG48C
VS
XCF08PVOG48C
- XCF32PVOG48CXilinx Inc.
48-TFSOP (0.724, 18.40mm Width)
48
-
-
1.8 V
0.5 mm
1.65 V
1999
XCF16PVOG48C
VS
XCF32PVOG48C
Aztec Electronics's Payment Terms
Aztec Electronics offers many types of payment options, and support in multiple currencies such as GBP, US dollars, RMB, etc. As relationships are built, payment plans can be established so that payments can be made on a predetermined time frame after receipt of the invoice.
T/T IN ADVANCE (Pay at time of order placement via wire transfer)
How to Ship Electronic Components?
We take great care when shipping electronics overseas. Both the U.S. and U.K. governments have imposed restrictions on air transport of electronics, according to the International Air Transport Association.
1. Understand the shipping rules of the destination country
Different countries have different regulations for shipping electronic equipment, check for certain certifications, and read the destination country's guidelines before shipping to prevent delays or confiscation of goods by customs.
2. Choose a reliable express logistics provider
From providing pick-up service to checking the status with real-time order number, conveniently track packages. At present, the logistics providers we cooperate with more include DHL, UPS, Fedex, TXT.
Of course, if you have a long-term cooperative freight forwarder or your own company's logistics account, you can pick up the goods directly from our warehouse
3. How much does it cost to ship the electronic components?
The shipping cost of electronic products depends on the size and weight of the package and the shipping distance. You can first ask us about the size/weight of the products we sell to estimate the shipping cost.
4. How long does it take to ship the electronic components?
If electronic component in stock, it is usually shipped before 5 o'clock on the same day, and it usually takes 5-10 working days to complete it by international express.
If it is a scheduled component, it needs to wait for the arrival of the parts, and then it will be inspected before delivery. If there are special circumstances, the sales staff will confirm with you. Weekends and holidays will also affect the delivery time of electronic products.
1. We provide 365 days warranty for all electronic components.
2. If you need a test report, please let us know. We have a long-term cooperative testing laboratory. If you have familiar testing laboratory, we can also ship to your designated laboratory for testing.
3. Where does Aztec Electronics mainly purchase electronic components from?
Distributors, free market, 48 global large-scale OEM factories in close contact with us (Great Price advantage, 100% original)
2.Are the Xilinx's XCF16PVOG48C price and stock displayed on the website accurate?
Aztec Electronics inventory fluctuates greatly and cannot be updated in time, it is recommended to confirm the order with Aztec Electronics salesperson or online customer service before payment.
You Also Ask
- How to test electronic components and quality inspections?
- How to transport your electronic components safely?
Need Any Service, please feel free contact us.
After the electronic components have passed the quality inspection of Aztec Electronics, there are generally the following five packaging forms for electronic components: Tape, Tube, Tray, Bulk and Ammo.
Tape/Reel | Tube | Tray | Bulk | Ammo |
Weave bulk chips into tapes and pack them into reels through SMD components packaging Tape Machine. Reel is the most commonly used. | When packaging, arrange the components in the same direction and put them into plastic tubes one at a time. | Choose tray package with the same specifications as the original manufacturer, put the components into the tray and use the strapping machine. | Bulk packaging means that the SMD components are freely packaged in a formed plastic box or bag. | Adhesive tape cut continuously in predetermined quantities. The cut strips are placed in boxes for safekeeping. |
Choose electronic components that are vacuum-sealed against water, dust, moisture, oxidation, corrosion, and even UV or RF pollution.
How to pack electronic components in cartons?
1. Choose the right box for your electronic components2. Use anti-static bubble film protect electronic component
3. Put it into the box, no buffer dead corner, 360-degree package.
4. Labeled as fragile to ensure that the courier knows what needs to be done with the package.
