Microchip Technology AT17F16-30CU
AT17F16-30CU
Microchip Technology AT17F16-30CU information
Type
Parameter
Factory Lead Time
17 Weeks
Mounting Type
Surface Mount
Package / Case
8-TDFN
Surface Mount
YES
Operating Temperature
-40°C~85°C
Packaging
Tube
Published
1997
JESD-609 Code
e4
Pbfree Code
yes
Part Status
Active
Moisture Sensitivity Level (MSL)
3 (168 Hours)
Number of Terminations
8
Terminal Finish
Nickel/Gold (Ni/Au)
Technology
CMOS
Voltage - Supply
2.97V~3.63V
Terminal Position
DUAL
Terminal Form
NO LEAD
Peak Reflow Temperature (Cel)
260
Number of Functions
1
Supply Voltage
3.3V
Terminal Pitch
1.27mm
Reflow Temperature-Max (s)
40
Base Part Number
AT17F16
JESD-30 Code
S-XDSO-N8
Qualification Status
Not Qualified
Supply Voltage-Max (Vsup)
3.63V
Power Supplies
3.3V
Supply Voltage-Min (Vsup)
2.97V
Programmable Type
FLASH
Memory Size
16Mb
Operating Mode
SYNCHRONOUS
Clock Frequency
33MHz
Supply Current-Max
0.04mA
Organization
16MX1
Memory Width
1
Standby Current-Max
0.002A
Memory Density
16777216 bit
Parallel/Serial
SERIAL
Memory IC Type
CONFIGURATION MEMORY
Endurance
10000 Write/Erase Cycles
Write Cycle Time-Max (tWC)
0.03ms
Height Seated (Max)
1.14mm
Length
5.99mm
Width
5.99mm
RoHS Status
ROHS3 Compliant
Lead Free
Lead Free
- Datasheets :
- PCN Design/Specification :
microchiptechnology-ata8204p3ctkqw-pcndesignspecification-9786.pdf
- PCN Assembly/Origin :
- PCN Packaging :
- ConflictMineralStatement :
microchip-dsc1123ci5400000-conflictmineralstatement-4089.pdf
AT17F16-30CU Overview
8-TDFN is used in this package.Packaging for the external use of Tube.An individual who is qualified to operate within the -40°C~85°C domain.The FLASH programming language can be used to program it.FPGA is powered by a voltage which is 2.97V~3.63V volts, and this voltage is the voltage from which the generator is powered.I have mounted this memory device in Surface Mount.The size of data storage is limited to 16Mb.AT17F16 will give you other related parts.The supply voltage should be 3.3V.A termination with different functions in the 8 axis.3.63V is the maximum voltage that can be used with this memory device.There must be a minimum voltage of 2.97V to supply the device with the power it needs.A CONFIGURATION MEMORY memory chip is shown here.In reflow soldering, the temperature should be controlled to a maximum of 260 degrees during the process.By using SERIAL-processing, data can be transmitted through this memory in a secure manner.In order for a memory chip to function properly, it must be subjected to a voltage of not more than 0.04mA.An IC that can work at 33MHz frequency is a memory IC.The use of a 3.3V power supply is recommended in order to achieve best results.
AT17F16-30CU Features
Operating temperature: -40°C~85°C.
FLASH program capability.
CONFIGURATION MEMORY memory IC.
SERIAL processing.
AT17F16-30CU Applications
There are a lot of Microchip Technology AT17F16-30CU applications of configuration proms for FPGAs.
- workstations,
- printers
- embedded logic
- mainframes
- telecommunications
- cell phones
- graphics card
- main computer memory
- eDRAM
- supercomputers
- ImagePart NumberManufacturerPackage / CaseSupply VoltageNumber of TerminationsTerminal PitchTerminal PositionOrganizationTechnologyPackagingView Compare
AT17F16-30CU
Microchip Technology8-TDFN
3.3 V
8
1.27 mm
DUAL
16MX1
CMOS
Tube
SST25VF016B-50-4I-S2AFMicrochip Technology8-SOIC (0.209, 5.30mm Width)
3 V
8
1.27 mm
DUAL
16MX1
CMOS
Tube
AT17F16-30CU
VS
SST25VF016B-50-4I-S2AF
- SST25VF016B-50-4C-S2AFMicrochip Technology
8-SOIC (0.209, 5.30mm Width)
3 V
8
1.27 mm
DUAL
16MX1
CMOS
Tube
AT17F16-30CU
VS
SST25VF016B-50-4C-S2AF
- SST26VF016-80-5I-S2AEMicrochip Technology
8-SOIC (0.209, 5.30mm Width)
3 V
8
1.27 mm
DUAL
16MX1
CMOS
Tube
AT17F16-30CU
VS
SST26VF016-80-5I-S2AE
SST26VF016B-104I/SNMicrochip Technology8-SOIC (0.154, 3.90mm Width)
3 V
8
1.27 mm
DUAL
16MX1
CMOS
Tube
AT17F16-30CU
VS
SST26VF016B-104I/SN
Aztec Electronics's Payment Terms
Aztec Electronics offers many types of payment options, and support in multiple currencies such as GBP, US dollars, RMB, etc. As relationships are built, payment plans can be established so that payments can be made on a predetermined time frame after receipt of the invoice.
T/T IN ADVANCE (Pay at time of order placement via wire transfer)
How to Ship Electronic Components?
We take great care when shipping electronics overseas. Both the U.S. and U.K. governments have imposed restrictions on air transport of electronics, according to the International Air Transport Association.
1. Understand the shipping rules of the destination country
Different countries have different regulations for shipping electronic equipment, check for certain certifications, and read the destination country's guidelines before shipping to prevent delays or confiscation of goods by customs.
2. Choose a reliable express logistics provider
From providing pick-up service to checking the status with real-time order number, conveniently track packages. At present, the logistics providers we cooperate with more include DHL, UPS, Fedex, TXT.
Of course, if you have a long-term cooperative freight forwarder or your own company's logistics account, you can pick up the goods directly from our warehouse
3. How much does it cost to ship the electronic components?
The shipping cost of electronic products depends on the size and weight of the package and the shipping distance. You can first ask us about the size/weight of the products we sell to estimate the shipping cost.
4. How long does it take to ship the electronic components?
If electronic component in stock, it is usually shipped before 5 o'clock on the same day, and it usually takes 5-10 working days to complete it by international express.
If it is a scheduled component, it needs to wait for the arrival of the parts, and then it will be inspected before delivery. If there are special circumstances, the sales staff will confirm with you. Weekends and holidays will also affect the delivery time of electronic products.
1. We provide 365 days warranty for all electronic components.
2. If you need a test report, please let us know. We have a long-term cooperative testing laboratory. If you have familiar testing laboratory, we can also ship to your designated laboratory for testing.
3. Where does Aztec Electronics mainly purchase electronic components from?
Distributors, free market, 48 global large-scale OEM factories in close contact with us (Great Price advantage, 100% original)
2.Are the Microchip Technology's AT17F16-30CU price and stock displayed on the website accurate?
Aztec Electronics inventory fluctuates greatly and cannot be updated in time, it is recommended to confirm the order with Aztec Electronics salesperson or online customer service before payment.
You Also Ask
- How to test electronic components and quality inspections?
- How to transport your electronic components safely?
Need Any Service, please feel free contact us.
After the electronic components have passed the quality inspection of Aztec Electronics, there are generally the following five packaging forms for electronic components: Tape, Tube, Tray, Bulk and Ammo.
Tape/Reel | Tube | Tray | Bulk | Ammo |
Weave bulk chips into tapes and pack them into reels through SMD components packaging Tape Machine. Reel is the most commonly used. | When packaging, arrange the components in the same direction and put them into plastic tubes one at a time. | Choose tray package with the same specifications as the original manufacturer, put the components into the tray and use the strapping machine. | Bulk packaging means that the SMD components are freely packaged in a formed plastic box or bag. | Adhesive tape cut continuously in predetermined quantities. The cut strips are placed in boxes for safekeeping. |
Choose electronic components that are vacuum-sealed against water, dust, moisture, oxidation, corrosion, and even UV or RF pollution.
How to pack electronic components in cartons?
1. Choose the right box for your electronic components2. Use anti-static bubble film protect electronic component
3. Put it into the box, no buffer dead corner, 360-degree package.
4. Labeled as fragile to ensure that the courier knows what needs to be done with the package.
