Microchip Technology AT17LV512A-10JU
AT17LV512A-10JU
Please send RFQ , we will respond immediately.
Microchip Technology AT17LV512A-10JU information
Type
Parameter
Factory Lead Time
8 Weeks
Contact Plating
Tin
Mount
Surface Mount
Mounting Type
Surface Mount
Package / Case
20-LCC (J-Lead)
Number of Pins
20
Weight
722.005655mg
Operating Temperature
-40°C~85°C
Packaging
Tube
Published
1997
JESD-609 Code
e3
Pbfree Code
yes
Part Status
Active
Moisture Sensitivity Level (MSL)
2 (1 Year)
Number of Terminations
20
Additional Feature
ALSO OPERATES AT 5V SUPPLY
Technology
CMOS
Voltage - Supply
3V~3.6V 4.5V~5.5V
Terminal Position
QUAD
Terminal Form
J BEND
Peak Reflow Temperature (Cel)
245
Number of Functions
1
Supply Voltage
3.3V
Terminal Pitch
1.27mm
Frequency
33MHz
Reflow Temperature-Max (s)
40
Base Part Number
AT17LV512A
Supply Voltage-Max (Vsup)
3.6V
Power Supplies
3.3V
Supply Voltage-Min (Vsup)
3V
Programmable Type
Serial EEPROM
Interface
2-Wire, Serial
Operating Supply Current
5mA
Nominal Supply Current
10mA
Memory Type
EEPROM
Organization
512KX1
Memory Width
1
Density
512 kb
Standby Current-Max
0.0002A
Endurance
100000 Write/Erase Cycles
Data Retention Time-Min
90
Write Protection
HARDWARE
Ready/Busy
YES
Height Seated (Max)
4.572mm
Length
8.9662mm
Width
8.9662mm
Radiation Hardening
No
RoHS Status
ROHS3 Compliant
Lead Free
Lead Free
- Datasheets :
- PCN Design/Specification :
microchiptechnology-ata8204p3ctkqw-pcndesignspecification-9786.pdf
- PCN Assembly/Origin :
- PCN Packaging :
- ConflictMineralStatement :
microchip-dsc1123ci5400000-conflictmineralstatement-4089.pdf
AT17LV512A-10JU Overview
The package uses a neat 20-LCC (J-Lead) interface.Packaging for the external use of Tube.A qualified individual to operate within -40°C~85°C is required.Using Serial EEPROM, you can program it.The voltage fed to it is 3V~3.6V 4.5V~5.5V.Surface Mount is the mounting position of this memory device.Other components related to "AT17LV512A" can also be found by searching the word.3.3V is the required supply voltage.A termination with different functions in the 20 axis.In order to use this memory device, a maximum voltage of 3.6V should be used.An operating voltage of 3V is required in order to supply the device.Reflow soldering should be done at 245°C maximum.FPGA is equipped wFPGAh 20 pins.Using a 3.3V power supply is recommended for best results.Therefore, ALSO OPERATES AT 5V SUPPLY is included in order to better meet customer needs.Memory is also known as a EEPROM memory.This is an application suitable for Surface Mount-based operating systems.The swicthing controller works at a frequency of 33MHz.Using 5mA, it operates.
AT17LV512A-10JU Features
Operating temperature: -40°C~85°C.
Serial EEPROM program capability.
EEPROM memory
Frequency: 33MHz.
AT17LV512A-10JU Applications
There are a lot of Microchip Technology AT17LV512A-10JU applications of configuration proms for FPGAs.
- printers
- supercomputers
- telecommunications
- personal digital assistants
- hard disk drive (HDD)
- data buffer
- eSRAM
- embedded logic
- eDRAM
- nonvolatile BIOS memory
- ImagePart NumberManufacturerPackage / CaseNumber of PinsDensityFrequencyInterfaceSupply VoltageNominal Supply CurrentMountView Compare
AT17LV512A-10JU
Microchip Technology20-LCC (J-Lead)
20
512 kb
33 MHz
2-Wire, Serial
3.3 V
10 mA
Surface Mount
- AT17LV256-10JUMicrochip Technology
20-LCC (J-Lead)
20
256 kb
10 MHz
2-Wire, Serial
3.3 V
10 mA
Surface Mount
AT17LV512A-10JU
VS
AT17LV256-10JU
- AT17LV256-10JIMicrochip Technology
20-LCC (J-Lead)
20
256 kb
12.5 MHz
2-Wire, Serial
-
10 mA
Surface Mount
AT17LV512A-10JU
VS
AT17LV256-10JI
Aztec Electronics's Payment Terms
Aztec Electronics offers many types of payment options, and support in multiple currencies such as GBP, US dollars, RMB, etc. As relationships are built, payment plans can be established so that payments can be made on a predetermined time frame after receipt of the invoice.
T/T IN ADVANCE (Pay at time of order placement via wire transfer)
How to Ship Electronic Components?
We take great care when shipping electronics overseas. Both the U.S. and U.K. governments have imposed restrictions on air transport of electronics, according to the International Air Transport Association.
1. Understand the shipping rules of the destination country
Different countries have different regulations for shipping electronic equipment, check for certain certifications, and read the destination country's guidelines before shipping to prevent delays or confiscation of goods by customs.
2. Choose a reliable express logistics provider
From providing pick-up service to checking the status with real-time order number, conveniently track packages. At present, the logistics providers we cooperate with more include DHL, UPS, Fedex, TXT.
Of course, if you have a long-term cooperative freight forwarder or your own company's logistics account, you can pick up the goods directly from our warehouse
3. How much does it cost to ship the electronic components?
The shipping cost of electronic products depends on the size and weight of the package and the shipping distance. You can first ask us about the size/weight of the products we sell to estimate the shipping cost.
4. How long does it take to ship the electronic components?
If electronic component in stock, it is usually shipped before 5 o'clock on the same day, and it usually takes 5-10 working days to complete it by international express.
If it is a scheduled component, it needs to wait for the arrival of the parts, and then it will be inspected before delivery. If there are special circumstances, the sales staff will confirm with you. Weekends and holidays will also affect the delivery time of electronic products.
1. We provide 365 days warranty for all electronic components.
2. If you need a test report, please let us know. We have a long-term cooperative testing laboratory. If you have familiar testing laboratory, we can also ship to your designated laboratory for testing.
3. Where does Aztec Electronics mainly purchase electronic components from?
Distributors, free market, 48 global large-scale OEM factories in close contact with us (Great Price advantage, 100% original)
2.Are the Microchip Technology's AT17LV512A-10JU price and stock displayed on the website accurate?
Aztec Electronics inventory fluctuates greatly and cannot be updated in time, it is recommended to confirm the order with Aztec Electronics salesperson or online customer service before payment.
You Also Ask
- How to test electronic components and quality inspections?
- How to transport your electronic components safely?
Need Any Service, please feel free contact us.
After the electronic components have passed the quality inspection of Aztec Electronics, there are generally the following five packaging forms for electronic components: Tape, Tube, Tray, Bulk and Ammo.
Tape/Reel | Tube | Tray | Bulk | Ammo |
Weave bulk chips into tapes and pack them into reels through SMD components packaging Tape Machine. Reel is the most commonly used. | When packaging, arrange the components in the same direction and put them into plastic tubes one at a time. | Choose tray package with the same specifications as the original manufacturer, put the components into the tray and use the strapping machine. | Bulk packaging means that the SMD components are freely packaged in a formed plastic box or bag. | Adhesive tape cut continuously in predetermined quantities. The cut strips are placed in boxes for safekeeping. |
Choose electronic components that are vacuum-sealed against water, dust, moisture, oxidation, corrosion, and even UV or RF pollution.
How to pack electronic components in cartons?
1. Choose the right box for your electronic components2. Use anti-static bubble film protect electronic component
3. Put it into the box, no buffer dead corner, 360-degree package.
4. Labeled as fragile to ensure that the courier knows what needs to be done with the package.
