Microchip Technology AT17F080-30JU
AT17F080-30JU
Please send RFQ , we will respond immediately.
Microchip Technology AT17F080-30JU information
Type
Parameter
Factory Lead Time
17 Weeks
Contact Plating
Tin
Mount
Surface Mount
Mounting Type
Surface Mount
Package / Case
20-LCC (J-Lead)
Number of Pins
20
Weight
722.005655mg
Operating Temperature
-40°C~85°C
Packaging
Tube
Published
1997
JESD-609 Code
e3
Pbfree Code
yes
Part Status
Active
Moisture Sensitivity Level (MSL)
3 (168 Hours)
Number of Terminations
20
Technology
CMOS
Voltage - Supply
2.97V~3.63V
Terminal Position
QUAD
Terminal Form
J BEND
Peak Reflow Temperature (Cel)
245
Number of Functions
1
Supply Voltage
3.3V
Terminal Pitch
1.27mm
Frequency
33MHz
Reflow Temperature-Max (s)
40
Base Part Number
AT17F080
Qualification Status
Not Qualified
Operating Supply Voltage
3.3V
Supply Voltage-Max (Vsup)
3.63V
Supply Voltage-Min (Vsup)
2.97V
Programmable Type
FLASH
Interface
2-Wire, Serial
Operating Supply Current
20mA
Nominal Supply Current
20mA
Operating Mode
SYNCHRONOUS
Organization
8MX1
Density
8 Mb
Memory IC Type
CONFIGURATION MEMORY
Write Cycle Time-Max (tWC)
0.03ms
Height
3.68mm
Length
9.04mm
Width
9.04mm
REACH SVHC
No SVHC
RoHS Status
ROHS3 Compliant
Lead Free
Lead Free
- Datasheets :
- PCN Design/Specification :
microchiptechnology-ata8204p3ctkqw-pcndesignspecification-9786.pdf
- PCN Packaging :
- ConflictMineralStatement :
microchip-dsc1123ci5400000-conflictmineralstatement-4089.pdf
AT17F080-30JU Overview
FPGA uses a neat 20-LCC (J-Lead) package.External packaging for the Tube series.An individual who is qualified to operate within the -40°C~85°C domain.With the help of FLASH, it can be programmed.FPGA is fed wFPGAh a voltage of 2.97V~3.63V.Surface Mount is the mounting position of this memory device.Look for "AT17F080" for other related parts.There is a voltage requirement of 3.3V for supplying it with power.20 terminations with different functions.With 3.63V as the maximum voltage, the memory device can be used.2.97V is the minimum voltage required to supply the device.The memory chip in question is a CONFIGURATION MEMORY memory chip.Reflow soldering should be done at no higher than 245 degrees.There are 20 pins on it.Prior to the use of the part in a circuit, it is recommended that users apply the 3.3V to the part so that the part will run as safely and reliably as possible.This is an application suitable for Surface Mount-based operating systems.The swicthing controller works at a frequency of 33MHz.A 20mA-based operating system is used.
AT17F080-30JU Features
Operating temperature: -40°C~85°C.
FLASH program capability.
CONFIGURATION MEMORY memory IC.
Frequency: 33MHz.
AT17F080-30JU Applications
There are a lot of Microchip Technology AT17F080-30JU applications of configuration proms for FPGAs.
- personal digital assistants
- telecommunications
- Cache memory
- graphics card
- Camcorders
- mainframes
- multimedia computers
- eDRAM
- main computer memory
- printers
- ImagePart NumberManufacturerPackage / CaseNumber of PinsDensityFrequencyInterfaceSupply VoltageTechnologyTerminal PitchView Compare
AT17F080-30JU
Microchip Technology20-LCC (J-Lead)
20
8 Mb
33 MHz
2-Wire, Serial
3.3 V
CMOS
1.27 mm
- AT17LV010A-10JUMicrochip Technology
20-LCC (J-Lead)
20
1 Mb
33 MHz
2-Wire, Serial
3.3 V
CMOS
1.27 mm
AT17F080-30JU
VS
AT17LV010A-10JU
- AT17LV002-10JUMicrochip Technology
20-LCC (J-Lead)
20
2 Mb
33 MHz
2-Wire, Serial
3.3 V
CMOS
1.27 mm
AT17F080-30JU
VS
AT17LV002-10JU
- AT17F16A-30JUMicrochip Technology
20-LCC (J-Lead)
20
16 Mb
10 MHz
2-Wire, Serial
3.3 V
CMOS
1.27 mm
AT17F080-30JU
VS
AT17F16A-30JU
Aztec Electronics's Payment Terms
Aztec Electronics offers many types of payment options, and support in multiple currencies such as GBP, US dollars, RMB, etc. As relationships are built, payment plans can be established so that payments can be made on a predetermined time frame after receipt of the invoice.
T/T IN ADVANCE (Pay at time of order placement via wire transfer)
How to Ship Electronic Components?
We take great care when shipping electronics overseas. Both the U.S. and U.K. governments have imposed restrictions on air transport of electronics, according to the International Air Transport Association.
1. Understand the shipping rules of the destination country
Different countries have different regulations for shipping electronic equipment, check for certain certifications, and read the destination country's guidelines before shipping to prevent delays or confiscation of goods by customs.
2. Choose a reliable express logistics provider
From providing pick-up service to checking the status with real-time order number, conveniently track packages. At present, the logistics providers we cooperate with more include DHL, UPS, Fedex, TXT.
Of course, if you have a long-term cooperative freight forwarder or your own company's logistics account, you can pick up the goods directly from our warehouse
3. How much does it cost to ship the electronic components?
The shipping cost of electronic products depends on the size and weight of the package and the shipping distance. You can first ask us about the size/weight of the products we sell to estimate the shipping cost.
4. How long does it take to ship the electronic components?
If electronic component in stock, it is usually shipped before 5 o'clock on the same day, and it usually takes 5-10 working days to complete it by international express.
If it is a scheduled component, it needs to wait for the arrival of the parts, and then it will be inspected before delivery. If there are special circumstances, the sales staff will confirm with you. Weekends and holidays will also affect the delivery time of electronic products.
1. We provide 365 days warranty for all electronic components.
2. If you need a test report, please let us know. We have a long-term cooperative testing laboratory. If you have familiar testing laboratory, we can also ship to your designated laboratory for testing.
3. Where does Aztec Electronics mainly purchase electronic components from?
Distributors, free market, 48 global large-scale OEM factories in close contact with us (Great Price advantage, 100% original)
2.Are the Microchip Technology's AT17F080-30JU price and stock displayed on the website accurate?
Aztec Electronics inventory fluctuates greatly and cannot be updated in time, it is recommended to confirm the order with Aztec Electronics salesperson or online customer service before payment.
You Also Ask
- How to test electronic components and quality inspections?
- How to transport your electronic components safely?
Need Any Service, please feel free contact us.
After the electronic components have passed the quality inspection of Aztec Electronics, there are generally the following five packaging forms for electronic components: Tape, Tube, Tray, Bulk and Ammo.
Tape/Reel | Tube | Tray | Bulk | Ammo |
Weave bulk chips into tapes and pack them into reels through SMD components packaging Tape Machine. Reel is the most commonly used. | When packaging, arrange the components in the same direction and put them into plastic tubes one at a time. | Choose tray package with the same specifications as the original manufacturer, put the components into the tray and use the strapping machine. | Bulk packaging means that the SMD components are freely packaged in a formed plastic box or bag. | Adhesive tape cut continuously in predetermined quantities. The cut strips are placed in boxes for safekeeping. |
Choose electronic components that are vacuum-sealed against water, dust, moisture, oxidation, corrosion, and even UV or RF pollution.
How to pack electronic components in cartons?
1. Choose the right box for your electronic components2. Use anti-static bubble film protect electronic component
3. Put it into the box, no buffer dead corner, 360-degree package.
4. Labeled as fragile to ensure that the courier knows what needs to be done with the package.
