ON Semiconductor LB1836M-TLM-E
LB1836M-TLM-E
Please send RFQ , we will respond immediately.
ON Semiconductor LB1836M-TLM-E information
Type
Parameter
Factory Lead Time
4 Weeks
Lifecycle Status
ACTIVE (Last Updated: 2 days ago)
Mount
Surface Mount
Mounting Type
Surface Mount
Package / Case
14-LSOP (0.173, 4.40mm Width)
Number of Pins
14
Operating Temperature
-40°C~85°C TA
Packaging
Cut Tape (CT)
Published
2010
Pbfree Code
yes
Part Status
Active
Moisture Sensitivity Level (MSL)
3 (168 Hours)
Applications
DC Motors, General Purpose
Technology
Bipolar
Voltage - Supply
2.5V~9V
Base Part Number
LB1836M
Pin Count
14
Number of Outputs
2
Output Voltage
500mV
Max Output Current
1A
Interface
Logic
Operating Supply Current
22mA
Output Configuration
Half Bridge (4)
Output Current
800mA
Output Current per Channel
1A
Collector Emitter Voltage (VCEO)
9V
Max Collector Current
1A
Voltage - Load
1.8V~9V
Fault Protection
Over Temperature
Motor Type
Stepper
Load Type
Inductive
Height
1.5mm
Length
8mm
Width
4.4mm
Radiation Hardening
No
REACH SVHC
No SVHC
RoHS Status
ROHS3 Compliant
Lead Free
Lead Free
- Datasheets :
- Environmental Information :
- PCN Design/Specification :
- PCN Assembly/Origin :
- RohsStatement :
LB1836M-TLM-E Overview
To package H bridge, use Cut Tape (CT).In an effort to save money, H bridge is included in the 14-LSOP (0.173, 4.40mm Width) package.Based on 2.5V~9V, improved reliabilbridge drivery can be achieved.H bridge circuit is mounted on Surface Mount.-40°C~85°C TA can work normally at motor driver H bridges operating temperature.H bridge motor driver is pretty useful in a wide range of applications, including DC Motors, General Purpose.In order to mount H gate on the PCB, Surface Mount is used.In a signal interface, the 14 pins serve as pronged contacts.Based on its base H bridge ic number of LB1836M, further related H bridge ics can be identified.The maximum load current that power supply can provide at a specified ambient temperature reaches 1A.There is 800mA current flowing through the output and power supply pins.A number of 14 pins work together to provide this bridge driver with its specific functions.The Hbridge has 2 outputs.This Hbridge releases a voltage of 500mV.
LB1836M-TLM-E Features
Available in 14-LSOP (0.173, 4.40mm Width) Package / Case
Operating Temperature at the range of Surface Mount
Interface IC Type : LB1836M
LB1836M-TLM-E Applications
There are a lot of ON Semiconductor LB1836M-TLM-E Full Bridge Drivers, Half-Bridge Drivers applications.
- Non-V-Core
- Networking Microprocessor Voltage Regulators
- Telecom Microprocessor
- Home Appliances
- Voltage Regulators for DDR memory arrays
- Dual DC motor
- Voltage Regulators
- Audio-visual equipment
- Desktop Computers
- Industrial Automation
- ImagePart NumberManufacturerPackage / CaseNumber of PinsNumber of OutputsMax Output CurrentOutput CurrentOutput VoltageInterfaceMounting TypeView Compare
LB1836M-TLM-E
ON Semiconductor14-LSOP (0.173, 4.40mm Width)
14
2
1 A
800 mA
500 mV
Logic
Surface Mount
LB1830M-TLM-EON Semiconductor10-LSOP (0.173, 4.40mm Width)
10
-
-
-
-
Parallel
Surface Mount
LB1836M-TLM-E
VS
LB1830M-TLM-E
- LB1838M-TRM-EON Semiconductor
14-LSOP (0.173, 4.40mm Width)
14
2
1 A
-
400 mV
Parallel
Surface Mount
LB1836M-TLM-E
VS
LB1838M-TRM-E
- LB1838M-MPB-EON Semiconductor
14-LSOP (0.173, 4.40mm Width)
14
2
1 A
-
-
Parallel
Surface Mount
LB1836M-TLM-E
VS
LB1838M-MPB-E
Aztec Electronics's Payment Terms
Aztec Electronics offers many types of payment options, and support in multiple currencies such as GBP, US dollars, RMB, Rubles, etc. As relationships are built, payment plans can be established so that payments can be made on a predetermined time frame after receipt of the invoice.
T/T IN ADVANCE (Pay at time of order placement via wire transfer)
How to Ship Electronic Components?
We take great care when shipping electronics overseas. Both the U.S. and U.K. governments have imposed restrictions on air transport of electronics, according to the International Air Transport Association.
1. Understand the shipping rules of the destination country
Different countries have different regulations for shipping electronic equipment, check for certain certifications, and read the destination country's guidelines before shipping to prevent delays or confiscation of goods by customs.
2. Choose a reliable express logistics provider
From providing pick-up service to checking the status with real-time order number, conveniently track packages. At present, the logistics providers we cooperate with more include DHL, UPS, Fedex, TXT, SF Express.
Of course, if you have a long-term cooperative freight forwarder or your own company's logistics account, you can pick up the goods directly from our warehouse
3. How much does it cost to ship the electronic components?
The shipping cost of electronic products depends on the size and weight of the package and the shipping distance. You can first ask us about the size/weight of the products we sell to estimate the shipping cost.
4. How long does it take to ship the electronic components?
If electronic component in stock, it is usually shipped before 5 o'clock on the same day, and it usually takes 5-10 working days to complete it by international express.
If it is a scheduled component, it needs to wait for the arrival of the parts, and then it will be inspected before delivery. If there are special circumstances, the sales staff will confirm with you. Weekends and holidays will also affect the delivery time of electronic products.
1. We provide 365 days warranty for all electronic components.
2. If you need a test report, please let us know. We have a long-term cooperative testing laboratory. If you have familiar testing laboratory, we can also ship to your designated laboratory for testing.
3. Where does Aztec Electronics mainly purchase electronic components from?
Distributors, free market, 48 global large-scale OEM factories in close contact with us (Great Price advantage, 100% original)
2.Are the ON Semiconductor's LB1836M-TLM-E price and stock displayed on the website accurate?
Aztec Electronics inventory fluctuates greatly and cannot be updated in time, it is recommended to confirm the order with Aztec Electronics salesperson or online customer service before payment.
You Also Ask
- How to test electronic components and quality inspections?
- How to transport your electronic components safely?
Need Any Service, please feel free contact us.
After the electronic components have passed the quality inspection of Aztec Electronics, there are generally the following five packaging forms for electronic components: Tape, Tube, Tray, Bulk and Ammo.
Tape/Reel | Tube | Tray | Bulk | Ammo |
Weave bulk chips into tapes and pack them into reels through SMD components packaging Tape Machine. Reel is the most commonly used. | When packaging, arrange the components in the same direction and put them into plastic tubes one at a time. | Choose tray package with the same specifications as the original manufacturer, put the components into the tray and use the strapping machine. | Bulk packaging means that the SMD components are freely packaged in a formed plastic box or bag. | Adhesive tape cut continuously in predetermined quantities. The cut strips are placed in boxes for safekeeping. |
Choose electronic components that are vacuum-sealed against water, dust, moisture, oxidation, corrosion, and even UV or RF pollution.
How to pack electronic components in cartons?
1. Choose the right box for your electronic components2. Use anti-static bubble film protect electronic component
3. Put it into the box, no buffer dead corner, 360-degree package.
4. Labeled as fragile to ensure that the courier knows what needs to be done with the package.
