Infineon Technologies IR3553MTRPBF
IR3553MTRPBF
Please send RFQ , we will respond immediately.
Infineon Technologies IR3553MTRPBF information
Type
Parameter
Factory Lead Time
16 Weeks
Mount
Surface Mount
Mounting Type
Surface Mount
Package / Case
25-PowerVFQFN
Number of Pins
25
Operating Temperature
-40°C~125°C TJ
Packaging
Tape & Reel (TR)
Published
2007
Series
PowIRstage®
Feature
Bootstrap Circuit, Diode Emulation, Status Flag
Part Status
Active
Moisture Sensitivity Level (MSL)
3 (168 Hours)
Number of Terminations
25
ECCN Code
EAR99
Applications
Synchronous Buck Converters, Voltage Regulators
Subcategory
Switching Regulator or Controllers
Technology
Power MOSFET
Voltage - Supply
4.5V~7V
Terminal Position
QUAD
Number of Functions
1
Frequency
1MHz
Base Part Number
IR3553MPBF
Output Voltage
5.5V
Max Output Current
40A
Input Voltage-Nom
12V
Interface
PWM
Analog IC - Other Type
SWITCHING REGULATOR
Nominal Supply Current
8mA
Output Configuration
Half Bridge
Output Current
40A
Max Supply Current
12mA
Input Voltage (Min)
4.5V
Control Mode
VOLTAGE-MODE
Output Current per Channel
40A
Control Technique
PULSE WIDTH MODULATION
Turn-Off Delay Time
200 ns
Voltage - Load
4.5V~15V
Fault Protection
Over Temperature, UVLO
Number of Drivers
1
Current - Peak Output
60A
Load Type
Inductive
Length
6mm
Width
4mm
Radiation Hardening
No
RoHS Status
ROHS3 Compliant
Lead Free
Lead Free
- Datasheets :
- Other Related Documents :
infineontechnologies-tda5200xuma1-otherrelateddocuments-8656.pdf
- PCN Assembly/Origin :
- PCN Packaging :
- PCN Other :
- ConflictMineralStatement :
IR3553MTRPBF Overview
H bridge is packaged using Tape & Reel (TR).Cost savings are achieved by including H bridge in the 25-PowerVFQFN package.Bridge driver is possible to improve the reliabilbridge drivery of 4.5V~7V by increasing the supply voltage.Surface Mount is mounted on H bridge circuit.Motor driver H bridge is possible for -40°C~125°C TJ to operate normally at motor driver H bridges operating temperature.H bridge motor driver has many applications, including Synchronous Buck Converters, Voltage Regulators.H gate is mounted on the PCB using Surface Mount.Bootstrap Circuit, Diode Emulation, Status Flag is one of full bridges specific characteristics.To terminate a transmission line with the H bridge whose characteristic impedance matches the line, 25 terminations are employed.Signal interfaces use 25 pins as pronged contacts.Its base H bridge ic number, IR3553MPBF, can be used to locate other H bridge ics that are related.H bridge circuit contains an analog IC type SWITCHING REGULATOR.A H-bridge in the PowIRstage? series, this is a type of electronic H-bridge.At a specified ambient temperature, 40A is the maximum load current that a power supply can provide.The output reaches a maximum current when H-bridge reaches 60A.The output pins and the power supply pins are conducting 40A current.This H bridge motor driver is included in the subcategory of Switching Regulator or Controllers.This Hbridge releases a voltage of 5.5V.H-bridge is possible to integrate 1 drivers into the system.
IR3553MTRPBF Features
Available in 25-PowerVFQFN Package / Case
Operating Temperature at the range of Surface Mount
Interface IC Type : IR3553MPBF
Subcategory: 60A
IR3553MTRPBF Applications
There are a lot of Infineon Technologies IR3553MTRPBF Full Bridge Drivers, Half-Bridge Drivers applications.
- Industrial Automation
- OA equipments
- Bipolar stepper motor
- Small Form-Factor Voltage Regulator Modules
- High-Current DC-DC Point-of-Load Converters
- VTR
- Voltage Regulators for DDR memory arrays
- DVD players
- Optical disc drives
- Voltage Regulators for CPUs
Aztec Electronics's Payment Terms
Aztec Electronics offers many types of payment options, and support in multiple currencies such as GBP, US dollars, RMB, Rubles, etc. As relationships are built, payment plans can be established so that payments can be made on a predetermined time frame after receipt of the invoice.
T/T IN ADVANCE (Pay at time of order placement via wire transfer)
How to Ship Electronic Components?
We take great care when shipping electronics overseas. Both the U.S. and U.K. governments have imposed restrictions on air transport of electronics, according to the International Air Transport Association.
1. Understand the shipping rules of the destination country
Different countries have different regulations for shipping electronic equipment, check for certain certifications, and read the destination country's guidelines before shipping to prevent delays or confiscation of goods by customs.
2. Choose a reliable express logistics provider
From providing pick-up service to checking the status with real-time order number, conveniently track packages. At present, the logistics providers we cooperate with more include DHL, UPS, Fedex, TXT, SF Express.
Of course, if you have a long-term cooperative freight forwarder or your own company's logistics account, you can pick up the goods directly from our warehouse
3. How much does it cost to ship the electronic components?
The shipping cost of electronic products depends on the size and weight of the package and the shipping distance. You can first ask us about the size/weight of the products we sell to estimate the shipping cost.
4. How long does it take to ship the electronic components?
If electronic component in stock, it is usually shipped before 5 o'clock on the same day, and it usually takes 5-10 working days to complete it by international express.
If it is a scheduled component, it needs to wait for the arrival of the parts, and then it will be inspected before delivery. If there are special circumstances, the sales staff will confirm with you. Weekends and holidays will also affect the delivery time of electronic products.
1. We provide 365 days warranty for all electronic components.
2. If you need a test report, please let us know. We have a long-term cooperative testing laboratory. If you have familiar testing laboratory, we can also ship to your designated laboratory for testing.
3. Where does Aztec Electronics mainly purchase electronic components from?
Distributors, free market, 48 global large-scale OEM factories in close contact with us (Great Price advantage, 100% original)
2.Are the Infineon Technologies's IR3553MTRPBF price and stock displayed on the website accurate?
Aztec Electronics inventory fluctuates greatly and cannot be updated in time, it is recommended to confirm the order with Aztec Electronics salesperson or online customer service before payment.
You Also Ask
- How to test electronic components and quality inspections?
- How to transport your electronic components safely?
Need Any Service, please feel free contact us.
After the electronic components have passed the quality inspection of Aztec Electronics, there are generally the following five packaging forms for electronic components: Tape, Tube, Tray, Bulk and Ammo.
Tape/Reel | Tube | Tray | Bulk | Ammo |
Weave bulk chips into tapes and pack them into reels through SMD components packaging Tape Machine. Reel is the most commonly used. | When packaging, arrange the components in the same direction and put them into plastic tubes one at a time. | Choose tray package with the same specifications as the original manufacturer, put the components into the tray and use the strapping machine. | Bulk packaging means that the SMD components are freely packaged in a formed plastic box or bag. | Adhesive tape cut continuously in predetermined quantities. The cut strips are placed in boxes for safekeeping. |
Choose electronic components that are vacuum-sealed against water, dust, moisture, oxidation, corrosion, and even UV or RF pollution.
How to pack electronic components in cartons?
1. Choose the right box for your electronic components2. Use anti-static bubble film protect electronic component
3. Put it into the box, no buffer dead corner, 360-degree package.
4. Labeled as fragile to ensure that the courier knows what needs to be done with the package.
