Analog Devices Inc. ADA4530-1ARZ
ADA4530-1ARZ
Please send RFQ , we will respond immediately.
Analog Devices Inc. ADA4530-1ARZ information
Type
Parameter
Factory Lead Time
20 Weeks
Lifecycle Status
PRODUCTION (Last Updated: 3 weeks ago)
Mount
Surface Mount
Mounting Type
Surface Mount
Package / Case
8-SOIC (0.154, 3.90mm Width)
Number of Pins
8
Operating Temperature
-40°C~125°C
Packaging
Tube
JESD-609 Code
e3
Pbfree Code
no
Part Status
Active
Moisture Sensitivity Level (MSL)
1 (Unlimited)
Number of Terminations
8
Terminal Finish
Matte Tin (Sn)
Subcategory
Operational Amplifier
Technology
CMOS
Terminal Position
DUAL
Terminal Form
GULL WING
Peak Reflow Temperature (Cel)
260
Number of Functions
1
Supply Voltage
5V
Reflow Temperature-Max (s)
30
Base Part Number
ADA4530
Pin Count
8
Output Type
Rail-to-Rail
Number of Channels
1
Operating Supply Current
900μA
Nominal Supply Current
900μA
Slew Rate
1.4V/μs
Amplifier Type
General Purpose
Common Mode Rejection Ratio
73 dB
Current - Input Bias
0.02pA
Voltage - Supply, Single/Dual (±)
4.5V~16V ±2.25V~8V
Output Current per Channel
-30mA
Input Offset Voltage (Vos)
8μV
Bandwidth
2MHz
Unity Gain BW-Nom
2000 kHz
Voltage Gain
155dB
Average Bias Current-Max (IIB)
2.5e-7μA
Power Supply Rejection Ratio (PSRR)
130dB
Current - Output / Channel
15mA
-3db Bandwidth
5.5MHz
Max Junction Temperature (Tj)
150°C
Height
1.75mm
Length
4.9mm
REACH SVHC
No SVHC
RoHS Status
ROHS3 Compliant
Lead Free
Lead Free
- Datasheets :
- Other Related Documents :
- ConflictMineralStatement :
analogdeviceslineartechnology-lt5400bhms8e8trpbf-conflictmineralstatement-8771.pdf
ADA4530-1ARZ Overview
In the package, you will find a 8-SOIC (0.154, 3.90mm Width)-case to contain the op amp ic. A General Purpose-type buffer amplifier is shown here. A Tube case is used for delivering the op amp. The number of terminations approaches 8. A total of 8 pins are attached to buffer op amp. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. It should be noted that this op amp is a type of Operational Amplifier device. A total of 8 pins are present on the instrumentation amplifier. With regards to the offset voltage of the input, buffer amplifier is rated at 8μV. For this electrical component, Surface Mount is the recommended mounting type. With regard to operating temperature, this op amp functions well at -40°C~125°C. Using an 900μA supply current, this operational amplifier ics can be operated. It is recommended to keep the voltage gain at 155dB at all times. As far as the device is concerned, buffer amplifier has 1 channels. This op amp ic outputs Rail-to-Rail signals, which is one of the many benefits it has.
ADA4530-1ARZ Features
8 Pins
supply voltage of 5V
155dB voltage gain
Output Type: Rail-to-Rail
ADA4530-1ARZ Applications
There are a lot of Analog Devices Inc. ADA4530-1ARZ Instrumentational OP Amps applications.
- Band-pass filter
- Power control
- Blood pressure sensors
- Micro signal measurement
- Communication
- Television
- Medical instruments
- Cinema or auditorium audio system
- earphone
- Digital cameras
- ImagePart NumberManufacturerPackage / CaseNumber of PinsSlew RateInput Offset Voltage (Vos)Power Supply Rejection Ratio (PSRR)Common Mode Rejection RatioSupply VoltageOperating Supply CurrentView Compare
ADA4530-1ARZ
Analog Devices Inc.8-SOIC (0.154, 3.90mm Width)
8
1.4V/μs
8 μV
130 dB
73 dB
5 V
900 μA
- MC33201DGON Semiconductor
SOIC
8
1 V/μs
6 mV
66.02 dB
60 dB
5 V
900 μA
ADA4530-1ARZ
VS
MC33201DG
- MC33201DR2GON Semiconductor
8-SOIC (0.154, 3.90mm Width)
8
1V/μs
6 mV
66.02 dB
60 dB
5 V
900 μA
ADA4530-1ARZ
VS
MC33201DR2G
- ADA4638-1ACPZ-R7Analog Devices Inc.
8-WFDFN Exposed Pad, CSP
8
1.5V/μs
4.5 μV
143 dB
142 dB
5 V
850 μA
ADA4530-1ARZ
VS
ADA4638-1ACPZ-R7
- MC33201VDR2GON Semiconductor
8-SOIC (0.154, 3.90mm Width)
8
1V/μs
13 mV
66.02 dB
60 dB
5 V
900 μA
ADA4530-1ARZ
VS
MC33201VDR2G
Aztec Electronics's Payment Terms
Aztec Electronics offers many types of payment options, and support in multiple currencies such as GBP, US dollars, RMB, etc. As relationships are built, payment plans can be established so that payments can be made on a predetermined time frame after receipt of the invoice.
T/T IN ADVANCE (Pay at time of order placement via wire transfer)
How to Ship Electronic Components?
We take great care when shipping electronics overseas. Both the U.S. and U.K. governments have imposed restrictions on air transport of electronics, according to the International Air Transport Association.
1. Understand the shipping rules of the destination country
Different countries have different regulations for shipping electronic equipment, check for certain certifications, and read the destination country's guidelines before shipping to prevent delays or confiscation of goods by customs.
2. Choose a reliable express logistics provider
From providing pick-up service to checking the status with real-time order number, conveniently track packages. At present, the logistics providers we cooperate with more include DHL, UPS, Fedex, TXT.
Of course, if you have a long-term cooperative freight forwarder or your own company's logistics account, you can pick up the goods directly from our warehouse
3. How much does it cost to ship the electronic components?
The shipping cost of electronic products depends on the size and weight of the package and the shipping distance. You can first ask us about the size/weight of the products we sell to estimate the shipping cost.
4. How long does it take to ship the electronic components?
If electronic component in stock, it is usually shipped before 5 o'clock on the same day, and it usually takes 5-10 working days to complete it by international express.
If it is a scheduled component, it needs to wait for the arrival of the parts, and then it will be inspected before delivery. If there are special circumstances, the sales staff will confirm with you. Weekends and holidays will also affect the delivery time of electronic products.
1. We provide 365 days warranty for all electronic components.
2. If you need a test report, please let us know. We have a long-term cooperative testing laboratory. If you have familiar testing laboratory, we can also ship to your designated laboratory for testing.
3. Where does Aztec Electronics mainly purchase electronic components from?
Distributors, free market, 48 global large-scale OEM factories in close contact with us (Great Price advantage, 100% original)
2.Are the ND-1's ADA4530-1ARZ price and stock displayed on the website accurate?
Aztec Electronics inventory fluctuates greatly and cannot be updated in time, it is recommended to confirm the order with Aztec Electronics salesperson or online customer service before payment.
You Also Ask
- How to test electronic components and quality inspections?
- How to transport your electronic components safely?
Need Any Service, please feel free contact us.
After the electronic components have passed the quality inspection of Aztec Electronics, there are generally the following five packaging forms for electronic components: Tape, Tube, Tray, Bulk and Ammo.
Tape/Reel | Tube | Tray | Bulk | Ammo |
Weave bulk chips into tapes and pack them into reels through SMD components packaging Tape Machine. Reel is the most commonly used. | When packaging, arrange the components in the same direction and put them into plastic tubes one at a time. | Choose tray package with the same specifications as the original manufacturer, put the components into the tray and use the strapping machine. | Bulk packaging means that the SMD components are freely packaged in a formed plastic box or bag. | Adhesive tape cut continuously in predetermined quantities. The cut strips are placed in boxes for safekeeping. |
Choose electronic components that are vacuum-sealed against water, dust, moisture, oxidation, corrosion, and even UV or RF pollution.
How to pack electronic components in cartons?
1. Choose the right box for your electronic components2. Use anti-static bubble film protect electronic component
3. Put it into the box, no buffer dead corner, 360-degree package.
4. Labeled as fragile to ensure that the courier knows what needs to be done with the package.