Analog Devices Inc. AD620ARZ-REEL7
AD620ARZ-REEL7
Please send RFQ , we will respond immediately.
Analog Devices Inc. AD620ARZ-REEL7 information
Type
Parameter
Factory Lead Time
8 Weeks
Lifecycle Status
PRODUCTION (Last Updated: 3 months ago)
Contact Plating
Tin
Mount
Surface Mount
Mounting Type
Surface Mount
Package / Case
8-SOIC (0.154, 3.90mm Width)
Number of Pins
8
Operating Temperature
-40°C~85°C
Packaging
Tape & Reel (TR)
JESD-609 Code
e3
Pbfree Code
no
Part Status
Active
Moisture Sensitivity Level (MSL)
1 (Unlimited)
Number of Terminations
8
ECCN Code
EAR99
Resistance
10GOhm
Max Power Dissipation
650mW
Terminal Position
DUAL
Terminal Form
GULL WING
Peak Reflow Temperature (Cel)
260
Number of Functions
1
Supply Voltage
15V
Reflow Temperature-Max (s)
30
Base Part Number
AD620
Pin Count
8
Operating Supply Voltage
18V
Number of Elements
1
Operating Supply Current
1.3mA
Nominal Supply Current
900μA
Power Dissipation
650mW
Slew Rate
1.2V/μs
Amplifier Type
Instrumentation
Common Mode Rejection Ratio
93 dB
Current - Input Bias
500pA
Voltage - Supply, Single/Dual (±)
4.6V~36V ±2.3V~18V
Output Current per Channel
18mA
Input Offset Voltage (Vos)
30mV
Bandwidth
1MHz
Neg Supply Voltage-Nom (Vsup)
-15V
Average Bias Current-Max (IIB)
0.0025μA
Power Supply Rejection Ratio (PSRR)
140dB
Voltage - Input Offset
30μV
-3db Bandwidth
1MHz
Dual Supply Voltage
15V
Voltage Gain-Min
1
Voltage Gain-Nom
10
Non-linearity-Max
0.004%
Length
4.9mm
Radiation Hardening
No
RoHS Status
ROHS3 Compliant
Lead Free
Contains Lead
- Datasheets :
- ConflictMineralStatement :
analogdeviceslineartechnology-lt5400bhms8e8trpbf-conflictmineralstatement-8771.pdf
AD620ARZ-REEL7 Overview
A 8-SOIC (0.154, 3.90mm Width) case is used to package the op amp. Op amps are Instrumentation types of amplifier on the chip. The case in which buffer amplifier is delivered is called a Tape & Reel (TR) case. During the past two weeks, there have been close to 8 terminations. In this case, there are 8 pins on the board. As a reminder, this buffer op amp should be powered by 15V battery and that the battery should be inserted in the amplifier. An 8-pin op amp ic is included in the package. In terms of the input offset voltage, instrumentation amplifier rates at 30mV. This electronic part is recommended for mounting type Surface Mount. With regard to operating temperature, this op amp functions well at -40°C~85°C. Using an 1.3mA supply current, this operational amplifier ics can be operated. A voltage rating of 1 is indicated for the op amp's operating supply voltage. The operating supply voltage of the buffer op amp is rated at 18V. To conduct electronic part voltage gain higher than 1. It is important to keep the resistance within the 10GOhm range of the op amps.
AD620ARZ-REEL7 Features
8 Pins
supply voltage of 15V
Resistance of 10GOhm
AD620ARZ-REEL7 Applications
There are a lot of Analog Devices Inc. AD620ARZ-REEL7 Instrumentational OP Amps applications.
- Strain gauges
- Industrial control system
- Signal filtering
- Signal operation
- pH (acidity)
- Multimedia playback equipment
- Precision measurement
- Logarithmic operation circuits
- Switching amplifier
- Portable media players
- ImagePart NumberManufacturerPackage / CaseNumber of PinsSlew RateInput Offset Voltage (Vos)Power Supply Rejection Ratio (PSRR)Common Mode Rejection RatioSupply VoltageOperating Supply CurrentView Compare
AD620ARZ-REEL7
Analog Devices Inc.8-SOIC (0.154, 3.90mm Width)
8
1.2V/μs
30 mV
140 dB
93 dB
15 V
1.3 mA
- AD620ARZAnalog Devices Inc.
8-SOIC (0.154, 3.90mm Width)
8
1.2V/μs
30 mV
140 dB
93 dB
15 V
1.3 mA
AD620ARZ-REEL7
VS
AD620ARZ
- AD620BRZAnalog Devices Inc.
8-SOIC (0.154, 3.90mm Width)
8
1.2V/μs
15 μV
140 dB
93 dB
15 V
1.3 mA
AD620ARZ-REEL7
VS
AD620BRZ
- AD621BRZAnalog Devices Inc.
8-SOIC (0.154, 3.90mm Width)
8
1.2V/μs
35 μV
100 dB
93 dB
15 V
1.3 mA
AD620ARZ-REEL7
VS
AD621BRZ
- MAX9919FASA+Maxim Integrated
8-SOIC (0.154, 3.90mm Width) Exposed Pad
8
0.9V/μs
400 μV
-
96 dB
5 V
1 mA
AD620ARZ-REEL7
VS
MAX9919FASA+
Aztec Electronics's Payment Terms
Aztec Electronics offers many types of payment options, and support in multiple currencies such as GBP, US dollars, RMB, etc. As relationships are built, payment plans can be established so that payments can be made on a predetermined time frame after receipt of the invoice.
T/T IN ADVANCE (Pay at time of order placement via wire transfer)
How to Ship Electronic Components?
We take great care when shipping electronics overseas. Both the U.S. and U.K. governments have imposed restrictions on air transport of electronics, according to the International Air Transport Association.
1. Understand the shipping rules of the destination country
Different countries have different regulations for shipping electronic equipment, check for certain certifications, and read the destination country's guidelines before shipping to prevent delays or confiscation of goods by customs.
2. Choose a reliable express logistics provider
From providing pick-up service to checking the status with real-time order number, conveniently track packages. At present, the logistics providers we cooperate with more include DHL, UPS, Fedex, TXT.
Of course, if you have a long-term cooperative freight forwarder or your own company's logistics account, you can pick up the goods directly from our warehouse
3. How much does it cost to ship the electronic components?
The shipping cost of electronic products depends on the size and weight of the package and the shipping distance. You can first ask us about the size/weight of the products we sell to estimate the shipping cost.
4. How long does it take to ship the electronic components?
If electronic component in stock, it is usually shipped before 5 o'clock on the same day, and it usually takes 5-10 working days to complete it by international express.
If it is a scheduled component, it needs to wait for the arrival of the parts, and then it will be inspected before delivery. If there are special circumstances, the sales staff will confirm with you. Weekends and holidays will also affect the delivery time of electronic products.
1. We provide 365 days warranty for all electronic components.
2. If you need a test report, please let us know. We have a long-term cooperative testing laboratory. If you have familiar testing laboratory, we can also ship to your designated laboratory for testing.
3. Where does Aztec Electronics mainly purchase electronic components from?
Distributors, free market, 48 global large-scale OEM factories in close contact with us (Great Price advantage, 100% original)
2.Are the ND-1's AD620ARZ-REEL7 price and stock displayed on the website accurate?
Aztec Electronics inventory fluctuates greatly and cannot be updated in time, it is recommended to confirm the order with Aztec Electronics salesperson or online customer service before payment.
You Also Ask
- How to test electronic components and quality inspections?
- How to transport your electronic components safely?
Need Any Service, please feel free contact us.
After the electronic components have passed the quality inspection of Aztec Electronics, there are generally the following five packaging forms for electronic components: Tape, Tube, Tray, Bulk and Ammo.
Tape/Reel | Tube | Tray | Bulk | Ammo |
Weave bulk chips into tapes and pack them into reels through SMD components packaging Tape Machine. Reel is the most commonly used. | When packaging, arrange the components in the same direction and put them into plastic tubes one at a time. | Choose tray package with the same specifications as the original manufacturer, put the components into the tray and use the strapping machine. | Bulk packaging means that the SMD components are freely packaged in a formed plastic box or bag. | Adhesive tape cut continuously in predetermined quantities. The cut strips are placed in boxes for safekeeping. |
Choose electronic components that are vacuum-sealed against water, dust, moisture, oxidation, corrosion, and even UV or RF pollution.
How to pack electronic components in cartons?
1. Choose the right box for your electronic components2. Use anti-static bubble film protect electronic component
3. Put it into the box, no buffer dead corner, 360-degree package.
4. Labeled as fragile to ensure that the courier knows what needs to be done with the package.