Microchip Technology PIC24F08KA102-I/ML
PIC24F08KA102-I/ML
Please send RFQ , we will respond immediately.
Microchip Technology PIC24F08KA102-I/ML information
Type
Parameter
Factory Lead Time
13 Weeks
Mount
Surface Mount
Mounting Type
Surface Mount
Package / Case
28-VQFN Exposed Pad
Number of Pins
28
Operating Temperature
-40°C~85°C TA
Packaging
Tube
Series
PIC® XLP™ 24F
JESD-609 Code
e3
Pbfree Code
yes
Part Status
Active
Moisture Sensitivity Level (MSL)
1 (Unlimited)
Number of Terminations
28
Termination
SMD/SMT
Terminal Finish
Matte Tin (Sn) - annealed
Subcategory
Microcontrollers
Technology
CMOS
Terminal Position
QUAD
Peak Reflow Temperature (Cel)
260
Supply Voltage
3.3V
Terminal Pitch
0.65mm
Frequency
32MHz
Reflow Temperature-Max (s)
40
Base Part Number
PIC24F08KA102
Pin Count
28
Supply Voltage-Min (Vsup)
3V
Interface
I2C, IrDA, SPI, UART, USART
Memory Size
8kB
Oscillator Type
Internal
Number of I/O
24
RAM Size
1.5K x 8
Voltage - Supply (Vcc/Vdd)
1.8V~3.6V
uPs/uCs/Peripheral ICs Type
MICROCONTROLLER
Number of Bits
16
Core Processor
PIC
Peripherals
Brown-out Detect/Reset, POR, PWM, WDT
Program Memory Type
FLASH
Core Size
16-Bit
Program Memory Size
8KB 2.75K x 24
Connectivity
I2C, IrDA, SPI, UART/USART
Bit Size
16
Data Converter
A/D 9x10b
Watchdog Timer
Yes
Has ADC
YES
DMA Channels
NO
Data Bus Width
16b
Number of Timers/Counters
3
Density
64 kb
EEPROM Size
512 x 8
CPU Family
PIC
Number of UART Channels
2
Number of ADC Channels
9
Number of PWM Channels
1
Height
950μm
Length
6mm
Width
6mm
Radiation Hardening
No
REACH SVHC
No SVHC
RoHS Status
ROHS3 Compliant
Lead Free
Lead Free
- Datasheets :
- PCN Assembly/Origin :
- PCN Packaging :
- ConflictMineralStatement :
microchip-dsc1123ci5400000-conflictmineralstatement-4089.pdf
PIC24F08KA102-I/ML Overview
In a 28-VQFN Exposed Pad package, the MCU is available. There are 24 I/Os. There is a mounting type Surface Mount associated with this Microcontroller. Powered by the 16-Bit core, it offers a wide range of capabilities. There is a FLASH type of memory for its program. Temperatures in the range of -40°C~85°C TA are operated by this Microcontroller. Microcontroller runs in PIC® XLP™ 24F Series. 8KB 2.75K x 24 is the size of its program memory. MCU is powered by PIC Core Processor. The device belongs to MICROCONTROLLER uPs/uCs/Peripheral ICs Type. IC Chip 28 has 28 terminations. 16-bits are the size of the data that comes with MCU. IC Chip has 3.3V volt supply outputs. With NO DMA channels, Microcontroller chip can handle large data transfers. 8kB memory size belongs to the part. Alternatives can be found by looking at the base part number PIC24F08KA102. This device is extremely efficient when operated at a frequency of 32MHz. It is possible to access the 28 pins on the chip through the 28 pins. A total of 3 timers/counters are included in the package. A total of 28 pins are included in the package. In this device, there is a PIC CPU embedded within it. There are 2 UART channels available on this board. It consists of 9 channels in total for the ADC. 16 bits are found on a chip. A total of 1 PWM channels are used by the device.
PIC24F08KA102-I/ML Features
28-VQFN Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC24F08KA102-I/ML Applications
There are a lot of Microchip Technology PIC24F08KA102-I/ML Microcontroller applications.
- Microwave ovens
- Answering machines
- Plant factories
- Information appliances
- Industrial instrumentation devices
- Computers
- Smartphones
- Process control devices
- Instrument control
- Ipod
- ImagePart NumberManufacturerPackage / CaseNumber of PinsData Bus WidthNumber of I/OInterfaceMemory SizeSupply VoltagePeripheralsView Compare
PIC24F08KA102-I/ML
Microchip Technology28-VQFN Exposed Pad
28
16 b
24
I2C, IrDA, SPI, UART, USART
8 kB
3.3 V
Brown-out Detect/Reset, POR, PWM, WDT
- PIC24F16KA102-I/MLMicrochip Technology
28-VQFN Exposed Pad
28
16 b
24
I2C, IrDA, SPI, UART, USART
16 kB
3.3 V
Brown-out Detect/Reset, POR, PWM, WDT
PIC24F08KA102-I/ML
VS
PIC24F16KA102-I/ML
- PIC24F16KM202-I/MLMicrochip Technology
28-VQFN Exposed Pad
28
16 b
24
I2C, SPI, UART
16 kB
3.3 V
Brown-out Detect/Reset, LVD, POR, PWM, WDT
PIC24F08KA102-I/ML
VS
PIC24F16KM202-I/ML
PIC24F16KL402-I/MQMicrochip Technology28-VFQFN Exposed Pad
28
16 b
24
I2C, IrDA, LIN, SPI, UART, USART
4 kB
3.3 V
Brown-out Detect/Reset, HLVD, POR, PWM, WDT
PIC24F08KA102-I/ML
VS
PIC24F16KL402-I/MQ
Aztec Electronics's Payment Terms
Aztec Electronics offers many types of payment options, and support in multiple currencies such as GBP, US dollars, RMB, etc. As relationships are built, payment plans can be established so that payments can be made on a predetermined time frame after receipt of the invoice.
T/T IN ADVANCE (Pay at time of order placement via wire transfer)
How to Ship Electronic Components?
We take great care when shipping electronics overseas. Both the U.S. and U.K. governments have imposed restrictions on air transport of electronics, according to the International Air Transport Association.
1. Understand the shipping rules of the destination country
Different countries have different regulations for shipping electronic equipment, check for certain certifications, and read the destination country's guidelines before shipping to prevent delays or confiscation of goods by customs.
2. Choose a reliable express logistics provider
From providing pick-up service to checking the status with real-time order number, conveniently track packages. At present, the logistics providers we cooperate with more include DHL, UPS, Fedex, TXT.
Of course, if you have a long-term cooperative freight forwarder or your own company's logistics account, you can pick up the goods directly from our warehouse
3. How much does it cost to ship the electronic components?
The shipping cost of electronic products depends on the size and weight of the package and the shipping distance. You can first ask us about the size/weight of the products we sell to estimate the shipping cost.
4. How long does it take to ship the electronic components?
If electronic component in stock, it is usually shipped before 5 o'clock on the same day, and it usually takes 5-10 working days to complete it by international express.
If it is a scheduled component, it needs to wait for the arrival of the parts, and then it will be inspected before delivery. If there are special circumstances, the sales staff will confirm with you. Weekends and holidays will also affect the delivery time of electronic products.
1. We provide 365 days warranty for all electronic components.
2. If you need a test report, please let us know. We have a long-term cooperative testing laboratory. If you have familiar testing laboratory, we can also ship to your designated laboratory for testing.
3. Where does Aztec Electronics mainly purchase electronic components from?
Distributors, free market, 48 global large-scale OEM factories in close contact with us (Great Price advantage, 100% original)
2.Are the Microchip Technology's PIC24F08KA102-I/ML price and stock displayed on the website accurate?
Aztec Electronics inventory fluctuates greatly and cannot be updated in time, it is recommended to confirm the order with Aztec Electronics salesperson or online customer service before payment.
You Also Ask
- How to test electronic components and quality inspections?
- How to transport your electronic components safely?
Need Any Service, please feel free contact us.
After the electronic components have passed the quality inspection of Aztec Electronics, there are generally the following five packaging forms for electronic components: Tape, Tube, Tray, Bulk and Ammo.
Tape/Reel | Tube | Tray | Bulk | Ammo |
Weave bulk chips into tapes and pack them into reels through SMD components packaging Tape Machine. Reel is the most commonly used. | When packaging, arrange the components in the same direction and put them into plastic tubes one at a time. | Choose tray package with the same specifications as the original manufacturer, put the components into the tray and use the strapping machine. | Bulk packaging means that the SMD components are freely packaged in a formed plastic box or bag. | Adhesive tape cut continuously in predetermined quantities. The cut strips are placed in boxes for safekeeping. |
Choose electronic components that are vacuum-sealed against water, dust, moisture, oxidation, corrosion, and even UV or RF pollution.
How to pack electronic components in cartons?
1. Choose the right box for your electronic components2. Use anti-static bubble film protect electronic component
3. Put it into the box, no buffer dead corner, 360-degree package.
4. Labeled as fragile to ensure that the courier knows what needs to be done with the package.
