Microchip Technology ATTINY85-20PU
ATTINY85-20PU
Microchip Technology ATTINY85-20PU information
Type
Parameter
Factory Lead Time
6 Weeks
Contact Plating
Tin
Mount
Through Hole
Mounting Type
Through Hole
Package / Case
8-DIP (0.300, 7.62mm)
Number of Pins
8
Operating Temperature
-40°C~85°C TA
Packaging
Tube
Published
1997
Series
AVR® ATtiny
JESD-609 Code
e3
Pbfree Code
yes
Part Status
Active
Moisture Sensitivity Level (MSL)
1 (Unlimited)
Number of Terminations
8
Termination
Through Hole
Subcategory
Microcontrollers
Technology
CMOS
Terminal Position
DUAL
Supply Voltage
5V
Frequency
20MHz
Base Part Number
ATTINY85
Supply Voltage-Max (Vsup)
5.5V
Power Supplies
3/5V
Interface
SPI
Memory Size
8kB
Oscillator Type
Internal
Number of I/O
6
RAM Size
512 x 8
Voltage - Supply (Vcc/Vdd)
2.7V~5.5V
uPs/uCs/Peripheral ICs Type
MICROCONTROLLER, RISC
Core Processor
AVR
Peripherals
Brown-out Detect/Reset, POR, PWM, WDT
Program Memory Type
FLASH
Core Size
8-Bit
Program Memory Size
8KB 4K x 16
Connectivity
USI
Bit Size
8
Data Converter
A/D 4x10b
Watchdog Timer
Yes
Access Time
20 μs
Has ADC
YES
DMA Channels
NO
Data Bus Width
8b
PWM Channels
YES
Number of Timers/Counters
2
EEPROM Size
512 x 8
Number of Programmable I/O
6
Number of ADC Channels
4
Number of I2C Channels
1
Height
4.953mm
Length
10.16mm
Width
7.112mm
Radiation Hardening
No
REACH SVHC
No SVHC
RoHS Status
ROHS3 Compliant
Lead Free
Lead Free
- Datasheets :
- PCN Design/Specification :
microchiptechnology-ata8204p3ctkqw-pcndesignspecification-9786.pdf
- PCN Packaging :
- ConflictMineralStatement :
microchip-dsc1123ci5400000-conflictmineralstatement-4089.pdf
ATTINY85-20PU Overview
There is a 8-DIP (0.300, 7.62mm) package available. There are 6 I/O ports on this device. This Microcontroller is mounted using the Through Hole mounting type. As the name implies, this Microcontroller is based on the 8-Bit core. There is a FLASH type of memory for its program. The temperature range that this Microcontroller operates at is -40°C~85°C TA. AVR® ATtiny series components make up this electrical component. This program has a program memory of 8KB 4K x 16 bytes, which is the size of the program. There is a AVR Core Processor inside MCU that provides this device with its power. This device belongs to the MICROCONTROLLER, RISC uPs/uCs/Peripheral ICs category. IC Chip 8 has 8 terminations. As a result, this Microcontroller comes with a 8-bit size. Microcontroller chip has outputs of 5V volts. In addition to that, MCU chip has NO DMA channels. The part has a memory size of 8kB. ATTINY85 is the base part number that you can use to find alternatives. A good performance can be achieved at a frequency of 20MHz, as long as it is operated at a low power consumption. Devices work in YES PWM channels. The pin number of the component remains 8. The clock has 2 timers or counters on it. As far as the programmability is concerned, it has 6 Programmable I/Os. In total, it has 4 ADC channels for the measurement of signals. A total of 1 I2C channels have been integrated into the part.
ATTINY85-20PU Features
8-DIP (0.300, 7.62mm) package
Mounting type of Through Hole
Microcontrollers subcategory
ATTINY85-20PU Applications
There are a lot of Microchip Technology ATTINY85-20PU Microcontroller applications.
- Automatic control
- Vacuum cleaners
- Oscilloscopes
- Smartphones
- Projectors
- Ipad
- Radios
- Information appliances
- Washing machines
- Data acquisition and control
- ImagePart NumberManufacturerPackage / CaseNumber of PinsData Bus WidthNumber of I/OInterfaceMemory SizeSupply VoltagePeripheralsView Compare
ATTINY85-20PU
Microchip Technology8-DIP (0.300, 7.62mm)
8
8 b
6
SPI
8 kB
5 V
Brown-out Detect/Reset, POR, PWM, WDT
- ATTINY25-20PUMicrochip Technology
8-DIP (0.300, 7.62mm)
8
8 b
6
SPI
2 kB
5 V
Brown-out Detect/Reset, POR, PWM, WDT
ATTINY85-20PU
VS
ATTINY25-20PU
- ATTINY13-20PUMicrochip Technology
8-DIP (0.300, 7.62mm)
8
8 b
6
SPI
1 kB
5 V
Brown-out Detect/Reset, POR, PWM, WDT
ATTINY85-20PU
VS
ATTINY13-20PU
- ATTINY45-20PUMicrochip Technology
8-DIP (0.300, 7.62mm)
8
8 b
6
SPI
4 kB
5 V
Brown-out Detect/Reset, POR, PWM, WDT
ATTINY85-20PU
VS
ATTINY45-20PU
Aztec Electronics's Payment Terms
Aztec Electronics offers many types of payment options, and support in multiple currencies such as GBP, US dollars, RMB, etc. As relationships are built, payment plans can be established so that payments can be made on a predetermined time frame after receipt of the invoice.
T/T IN ADVANCE (Pay at time of order placement via wire transfer)
How to Ship Electronic Components?
We take great care when shipping electronics overseas. Both the U.S. and U.K. governments have imposed restrictions on air transport of electronics, according to the International Air Transport Association.
1. Understand the shipping rules of the destination country
Different countries have different regulations for shipping electronic equipment, check for certain certifications, and read the destination country's guidelines before shipping to prevent delays or confiscation of goods by customs.
2. Choose a reliable express logistics provider
From providing pick-up service to checking the status with real-time order number, conveniently track packages. At present, the logistics providers we cooperate with more include DHL, UPS, Fedex, TXT.
Of course, if you have a long-term cooperative freight forwarder or your own company's logistics account, you can pick up the goods directly from our warehouse
3. How much does it cost to ship the electronic components?
The shipping cost of electronic products depends on the size and weight of the package and the shipping distance. You can first ask us about the size/weight of the products we sell to estimate the shipping cost.
4. How long does it take to ship the electronic components?
If electronic component in stock, it is usually shipped before 5 o'clock on the same day, and it usually takes 5-10 working days to complete it by international express.
If it is a scheduled component, it needs to wait for the arrival of the parts, and then it will be inspected before delivery. If there are special circumstances, the sales staff will confirm with you. Weekends and holidays will also affect the delivery time of electronic products.
1. We provide 365 days warranty for all electronic components.
2. If you need a test report, please let us know. We have a long-term cooperative testing laboratory. If you have familiar testing laboratory, we can also ship to your designated laboratory for testing.
3. Where does Aztec Electronics mainly purchase electronic components from?
Distributors, free market, 48 global large-scale OEM factories in close contact with us (Great Price advantage, 100% original)
2.Are the Microchip Technology's ATTINY85-20PU price and stock displayed on the website accurate?
Aztec Electronics inventory fluctuates greatly and cannot be updated in time, it is recommended to confirm the order with Aztec Electronics salesperson or online customer service before payment.
You Also Ask
- How to test electronic components and quality inspections?
- How to transport your electronic components safely?
Need Any Service, please feel free contact us.
After the electronic components have passed the quality inspection of Aztec Electronics, there are generally the following five packaging forms for electronic components: Tape, Tube, Tray, Bulk and Ammo.
Tape/Reel | Tube | Tray | Bulk | Ammo |
Weave bulk chips into tapes and pack them into reels through SMD components packaging Tape Machine. Reel is the most commonly used. | When packaging, arrange the components in the same direction and put them into plastic tubes one at a time. | Choose tray package with the same specifications as the original manufacturer, put the components into the tray and use the strapping machine. | Bulk packaging means that the SMD components are freely packaged in a formed plastic box or bag. | Adhesive tape cut continuously in predetermined quantities. The cut strips are placed in boxes for safekeeping. |
Choose electronic components that are vacuum-sealed against water, dust, moisture, oxidation, corrosion, and even UV or RF pollution.
How to pack electronic components in cartons?
1. Choose the right box for your electronic components2. Use anti-static bubble film protect electronic component
3. Put it into the box, no buffer dead corner, 360-degree package.
4. Labeled as fragile to ensure that the courier knows what needs to be done with the package.
