Microchip Technology ATSHA204A-MAHDA-T
ATSHA204A-MAHDA-T
Please send RFQ , we will respond immediately.
Microchip Technology ATSHA204A-MAHDA-T information
Type
Parameter
Factory Lead Time
8 Weeks
Contact Plating
Gold
Mount
Surface Mount
Mounting Type
Surface Mount
Package / Case
8-UFDFN Exposed Pad
Number of Pins
8
Weight
9.49709mg
Manufacturer Package Identifier
C04-21355-Q4B
Packaging
Tape & Reel (TR)
Published
2013
Series
CryptoAuthentication™
JESD-609 Code
e4
Pbfree Code
yes
Part Status
Active
Moisture Sensitivity Level (MSL)
1 (Unlimited)
Number of Terminations
8
Type
Authentication Chip
Max Operating Temperature
85°C
Min Operating Temperature
-40°C
Applications
Networking and Communications
Technology
CMOS
Terminal Position
DUAL
Terminal Form
GULL WING
Peak Reflow Temperature (Cel)
260
Number of Functions
1
Terminal Pitch
0.5mm
Reflow Temperature-Max (s)
40
Base Part Number
ATSHA204A
Output Voltage
400mV
Operating Supply Voltage
5.5V
Temperature Grade
INDUSTRIAL
Interface
I2C, Serial
Max Supply Voltage
6V
Min Supply Voltage
2V
Operating Mode
SYNCHRONOUS
Output Current
4mA
Access Time
550 ns
Memory Width
8
Density
4.5 kb
Max Frequency
1MHz
Number of Input Lines
1
Ambient Temperature Range High
85°C
Height
600μm
Length
3mm
Width
2mm
RoHS Status
ROHS3 Compliant
Lead Free
Lead Free
- Datasheets :
- PCN Design/Specification :
microchiptechnology-ata8204p3ctkqw-pcndesignspecification-9786.pdf
- PCN Assembly/Origin :
- PCN Packaging :
- ConflictMineralStatement :
microchip-dsc1123ci5400000-conflictmineralstatement-4089.pdf
ATSHA204A-MAHDA-T Overview
Package 8-UFDFN Exposed Pad contains the ICs.Contains this module is the package Tape & Reel (TR).In order to mount integrated circuit, integrated circuit is done in the way of Surface Mount.Various integrated circuits use this type of Authentication Chip.The ATSHA204A family contains similar integrated circuit systems.Networking and Communications is a suitable integrated circuit for the ICs.In total, there are 8 terminations on the ICs solutions.8 pins are available on the ICs applications.A suggested mounting method for this ICs application would be to mount it by Surface Mount.The ICs complete is recommended for use when the temperature is below 85°C.The integrated circuit system should not operate lower than -40°C operating temperature.The CryptoAuthentication? series comprises this electrical ICs application.As long as the supply voltage is 6V, this integrated circuit will operate.This integrated circuit requires a supply voltage of at least 2V.This application specific integrated circuit has a voltage rating of 5.5V.
ATSHA204A-MAHDA-T Features
Applications : Networking and Communications
It belongs to CryptoAuthentication? Series
ATSHA204A-MAHDA-T Applications
There are a lot of Microchip Technology ATSHA204A-MAHDA-T Specialized ICs applications.
- PDAs and Palmtop Devices
- PC-Based Instruments
- All converters requiring very low standby power
- Membrane Keypads
- IoT Node Authentication
- Industrial Networks
- Isolated CAN Bus Interface
- Peripheral Authentication
- Appliances requiring ErP Lot 6 compliance
- Authentication of Medical Sensors and Tools
- ImagePart NumberManufacturerPackage / CaseNumber of PinsInterfaceMin Supply VoltageMax Supply VoltageNumber of TerminationsMountMoisture Sensitivity Level (MSL)View Compare
ATSHA204A-MAHDA-T
Microchip Technology8-UFDFN Exposed Pad
8
I2C, Serial
2 V
6 V
8
Surface Mount
1 (Unlimited)
- 93LC66A/SNMicrochip Technology
8-SOIC (0.154, 3.90mm Width)
8
Serial
-
-
8
Surface Mount
1 (Unlimited)
ATSHA204A-MAHDA-T
VS
93LC66A/SN
- 93LC46B/SNMicrochip Technology
8-SOIC (0.154, 3.90mm Width)
8
Serial
-
-
8
Surface Mount
1 (Unlimited)
ATSHA204A-MAHDA-T
VS
93LC46B/SN
- 93LC66B/SNMicrochip Technology
8-SOIC (0.154, 3.90mm Width)
8
Serial
-
-
8
Surface Mount
1 (Unlimited)
ATSHA204A-MAHDA-T
VS
93LC66B/SN
- CAT64LC40YI-GT3ON Semiconductor
8-TSSOP (0.173, 4.40mm Width)
8
SPI, Serial
-
-
8
Surface Mount
1 (Unlimited)
ATSHA204A-MAHDA-T
VS
CAT64LC40YI-GT3
Aztec Electronics's Payment Terms
Aztec Electronics offers many types of payment options, and support in multiple currencies such as GBP, US dollars, RMB, etc. As relationships are built, payment plans can be established so that payments can be made on a predetermined time frame after receipt of the invoice.
T/T IN ADVANCE (Pay at time of order placement via wire transfer)
How to Ship Electronic Components?
We take great care when shipping electronics overseas. Both the U.S. and U.K. governments have imposed restrictions on air transport of electronics, according to the International Air Transport Association.
1. Understand the shipping rules of the destination country
Different countries have different regulations for shipping electronic equipment, check for certain certifications, and read the destination country's guidelines before shipping to prevent delays or confiscation of goods by customs.
2. Choose a reliable express logistics provider
From providing pick-up service to checking the status with real-time order number, conveniently track packages. At present, the logistics providers we cooperate with more include DHL, UPS, Fedex, TXT.
Of course, if you have a long-term cooperative freight forwarder or your own company's logistics account, you can pick up the goods directly from our warehouse
3. How much does it cost to ship the electronic components?
The shipping cost of electronic products depends on the size and weight of the package and the shipping distance. You can first ask us about the size/weight of the products we sell to estimate the shipping cost.
4. How long does it take to ship the electronic components?
If electronic component in stock, it is usually shipped before 5 o'clock on the same day, and it usually takes 5-10 working days to complete it by international express.
If it is a scheduled component, it needs to wait for the arrival of the parts, and then it will be inspected before delivery. If there are special circumstances, the sales staff will confirm with you. Weekends and holidays will also affect the delivery time of electronic products.
1. We provide 365 days warranty for all electronic components.
2. If you need a test report, please let us know. We have a long-term cooperative testing laboratory. If you have familiar testing laboratory, we can also ship to your designated laboratory for testing.
3. Where does Aztec Electronics mainly purchase electronic components from?
Distributors, free market, 48 global large-scale OEM factories in close contact with us (Great Price advantage, 100% original)
2.Are the Microchip Technology's ATSHA204A-MAHDA-T price and stock displayed on the website accurate?
Aztec Electronics inventory fluctuates greatly and cannot be updated in time, it is recommended to confirm the order with Aztec Electronics salesperson or online customer service before payment.
You Also Ask
- How to test electronic components and quality inspections?
- How to transport your electronic components safely?
Need Any Service, please feel free contact us.
After the electronic components have passed the quality inspection of Aztec Electronics, there are generally the following five packaging forms for electronic components: Tape, Tube, Tray, Bulk and Ammo.
Tape/Reel | Tube | Tray | Bulk | Ammo |
Weave bulk chips into tapes and pack them into reels through SMD components packaging Tape Machine. Reel is the most commonly used. | When packaging, arrange the components in the same direction and put them into plastic tubes one at a time. | Choose tray package with the same specifications as the original manufacturer, put the components into the tray and use the strapping machine. | Bulk packaging means that the SMD components are freely packaged in a formed plastic box or bag. | Adhesive tape cut continuously in predetermined quantities. The cut strips are placed in boxes for safekeeping. |
Choose electronic components that are vacuum-sealed against water, dust, moisture, oxidation, corrosion, and even UV or RF pollution.
How to pack electronic components in cartons?
1. Choose the right box for your electronic components2. Use anti-static bubble film protect electronic component
3. Put it into the box, no buffer dead corner, 360-degree package.
4. Labeled as fragile to ensure that the courier knows what needs to be done with the package.