Microchip Technology AT88SC3216C-SU
AT88SC3216C-SU
Please send RFQ , we will respond immediately.
Microchip Technology AT88SC3216C-SU information
Type
Parameter
Factory Lead Time
21 Weeks
Contact Plating
Tin
Mount
Surface Mount
Mounting Type
Surface Mount
Package / Case
8-SOIC (0.154, 3.90mm Width)
Number of Pins
8
Packaging
Tube
Published
2009
Series
CryptoMemory®
JESD-609 Code
e3
Pbfree Code
yes
Part Status
Active
Moisture Sensitivity Level (MSL)
3 (168 Hours)
Number of Terminations
8
Type
Secure Memory
Max Operating Temperature
85°C
Min Operating Temperature
-40°C
Applications
Embedded, Smart Card
Additional Feature
ALSO SUPPORTS SYNCHRONOUS OPERATION
Technology
CMOS
Terminal Position
DUAL
Terminal Form
GULL WING
Peak Reflow Temperature (Cel)
260
Number of Functions
1
Supply Voltage
3V
Terminal Pitch
1.27mm
Frequency
5MHz
Reflow Temperature-Max (s)
40
Base Part Number
AT88SC3216
Qualification Status
Not Qualified
Power Supplies
3/5V
Temperature Grade
INDUSTRIAL
Interface
2-Wire, I2C, Serial
Max Supply Voltage
5.5V
Min Supply Voltage
2.7V
Memory Size
31.3kB
Nominal Supply Current
5mA
Memory Type
EEPROM
Operating Mode
ASYNCHRONOUS
Access Time
35 μs
Organization
32KX1
Memory Width
1
Density
32 kb
Standby Current-Max
0.0001A
Endurance
100000 Write/Erase Cycles
Write Cycle Time-Max (tWC)
7ms
Data Retention Time-Min
10
Write Protection
SOFTWARE
I2C Control Byte
1011CCCC
Height Seated (Max)
1.75mm
Length
4.925mm
Width
3.9mm
RoHS Status
ROHS3 Compliant
Lead Free
Lead Free
- Datasheets :
- PCN Design/Specification :
microchiptechnology-ata8204p3ctkqw-pcndesignspecification-9786.pdf
- PCN Packaging :
- ConflictMineralStatement :
microchip-dsc1123ci5400000-conflictmineralstatement-4089.pdf
AT88SC3216C-SU Overview
8-SOIC (0.154, 3.90mm Width) is the package that contains the ICs.This module is included in a package named Tube.Surface Mount is used to mount integrated circuit.The Secure Memory is available in a wide range of integrated circuits.The AT88SC3216 family contains similar integrated circuit systems.Embedded, Smart Card is the appropriate place to apply the ICs.ICs solutions terminations total 8.A ICs applications with 8 pins is available.This logic gate IC should be run at 3V.Ideally, it would be best to mount this ICs application by Surface Mount.You should use it when the integrated circuit chip's temperature is below 85°C.No operating temperature lower than -40°C should be used for the integrated circuit system.It is integrated circuit system of the series CryptoMemory?.Supply voltage 5.5V is compatible with this integrated circuit.There should be no voltage lower than 2.7V for this integrated circuit.This ICs complete has the capability of delivering voltage at 3/5V.Frequency 5MHz is set on the logic IC.The memory type of this integrated circuit chip is EEPROM.Check out the additional features in this integrated circuit board :ALSO SUPPORTS SYNCHRONOUS OPERATION.There is a memory size of 31.3kB in this memory.
AT88SC3216C-SU Features
Applications : Embedded, Smart Card
It belongs to CryptoMemory? Series
Supply power of 3/5V
Memory Type : EEPROM
Memory Size: 31.3kB
AT88SC3216C-SU Applications
There are a lot of Microchip Technology AT88SC3216C-SU Specialized ICs applications.
- IoT Node Authentication
- MP3 Players
- Isolated CAN Bus Interface
- Message Security
- Printer Cartridge Identification and Authentication
- Secure Management of Limited Use Consumables
- DeviceNet Applications
- Authentication of Medical Sensors and Tools
- Industrial Instruments
- Appliances requiring ErP Lot 6 compliance
- ImagePart NumberManufacturerPackage / CaseNumber of PinsDensityAccess TimeFrequencyInterfaceMin Supply VoltageSupply VoltageView Compare
AT88SC3216C-SU
Microchip Technology8-SOIC (0.154, 3.90mm Width)
8
32 kb
35 μs
5 MHz
2-Wire, I2C, Serial
2.7 V
3 V
BR25L320FJ-WE2ROHM Semiconductor8-SOIC (0.154, 3.90mm Width)
8
32 kb
70 ns
-
SPI, Serial
-
2.5 V
AT88SC3216C-SU
VS
BR25L320FJ-WE2
24LC32AT-I/SNMicrochip Technology8-SOIC (0.154, 3.90mm Width)
8
32 kb
900ns
-
2-Wire, I2C, Serial
-
5 V
AT88SC3216C-SU
VS
24LC32AT-I/SN
- 25LC320A-I/SNMicrochip Technology
8-SOIC (0.154, 3.90mm Width)
8
32 kb
160 ns
-
SPI, Serial
-
5 V
AT88SC3216C-SU
VS
25LC320A-I/SN
- 24LC32A-I/SNMicrochip Technology
8-SOIC (0.154, 3.90mm Width)
8
32 kb
900ns
-
2-Wire, I2C, Serial
-
5 V
AT88SC3216C-SU
VS
24LC32A-I/SN
Aztec Electronics's Payment Terms
Aztec Electronics offers many types of payment options, and support in multiple currencies such as GBP, US dollars, RMB, etc. As relationships are built, payment plans can be established so that payments can be made on a predetermined time frame after receipt of the invoice.
T/T IN ADVANCE (Pay at time of order placement via wire transfer)
How to Ship Electronic Components?
We take great care when shipping electronics overseas. Both the U.S. and U.K. governments have imposed restrictions on air transport of electronics, according to the International Air Transport Association.
1. Understand the shipping rules of the destination country
Different countries have different regulations for shipping electronic equipment, check for certain certifications, and read the destination country's guidelines before shipping to prevent delays or confiscation of goods by customs.
2. Choose a reliable express logistics provider
From providing pick-up service to checking the status with real-time order number, conveniently track packages. At present, the logistics providers we cooperate with more include DHL, UPS, Fedex, TXT.
Of course, if you have a long-term cooperative freight forwarder or your own company's logistics account, you can pick up the goods directly from our warehouse
3. How much does it cost to ship the electronic components?
The shipping cost of electronic products depends on the size and weight of the package and the shipping distance. You can first ask us about the size/weight of the products we sell to estimate the shipping cost.
4. How long does it take to ship the electronic components?
If electronic component in stock, it is usually shipped before 5 o'clock on the same day, and it usually takes 5-10 working days to complete it by international express.
If it is a scheduled component, it needs to wait for the arrival of the parts, and then it will be inspected before delivery. If there are special circumstances, the sales staff will confirm with you. Weekends and holidays will also affect the delivery time of electronic products.
1. We provide 365 days warranty for all electronic components.
2. If you need a test report, please let us know. We have a long-term cooperative testing laboratory. If you have familiar testing laboratory, we can also ship to your designated laboratory for testing.
3. Where does Aztec Electronics mainly purchase electronic components from?
Distributors, free market, 48 global large-scale OEM factories in close contact with us (Great Price advantage, 100% original)
2.Are the Microchip Technology's AT88SC3216C-SU price and stock displayed on the website accurate?
Aztec Electronics inventory fluctuates greatly and cannot be updated in time, it is recommended to confirm the order with Aztec Electronics salesperson or online customer service before payment.
You Also Ask
- How to test electronic components and quality inspections?
- How to transport your electronic components safely?
Need Any Service, please feel free contact us.
After the electronic components have passed the quality inspection of Aztec Electronics, there are generally the following five packaging forms for electronic components: Tape, Tube, Tray, Bulk and Ammo.
Tape/Reel | Tube | Tray | Bulk | Ammo |
Weave bulk chips into tapes and pack them into reels through SMD components packaging Tape Machine. Reel is the most commonly used. | When packaging, arrange the components in the same direction and put them into plastic tubes one at a time. | Choose tray package with the same specifications as the original manufacturer, put the components into the tray and use the strapping machine. | Bulk packaging means that the SMD components are freely packaged in a formed plastic box or bag. | Adhesive tape cut continuously in predetermined quantities. The cut strips are placed in boxes for safekeeping. |
Choose electronic components that are vacuum-sealed against water, dust, moisture, oxidation, corrosion, and even UV or RF pollution.
How to pack electronic components in cartons?
1. Choose the right box for your electronic components2. Use anti-static bubble film protect electronic component
3. Put it into the box, no buffer dead corner, 360-degree package.
4. Labeled as fragile to ensure that the courier knows what needs to be done with the package.
