Microchip Technology AT88SC0104CA-SH
AT88SC0104CA-SH
Please send RFQ , we will respond immediately.
Microchip Technology AT88SC0104CA-SH information
Type
Parameter
Factory Lead Time
9 Weeks
Mount
Surface Mount
Mounting Type
Surface Mount
Package / Case
8-SOIC (0.154, 3.90mm Width)
Number of Pins
8
Packaging
Tube
Published
1997
Series
CryptoMemory®
Pbfree Code
yes
Part Status
Active
Moisture Sensitivity Level (MSL)
1 (Unlimited)
Number of Terminations
8
Type
Secure Memory
Max Operating Temperature
85°C
Min Operating Temperature
-40°C
Applications
Embedded, Smart Card
Technology
CMOS
Terminal Position
DUAL
Terminal Form
GULL WING
Number of Functions
1
Terminal Pitch
1.27mm
Frequency
4MHz
Base Part Number
AT88SC0104
Power Supplies
3/3.3V
Temperature Grade
INDUSTRIAL
Interface
2-Wire, I2C, Serial
Max Supply Voltage
5.5V
Min Supply Voltage
2.7V
Memory Size
128B
Nominal Supply Current
5mA
Memory Type
EEPROM
Access Time
250 ns
Organization
1KX1
Memory Width
1
Density
1 kb
Standby Current-Max
0.0001A
Endurance
100000 Write/Erase Cycles
Data Retention Time-Min
10
Write Protection
SOFTWARE
I2C Control Byte
1011CCCC
Height Seated (Max)
1.75mm
Length
4.925mm
Width
3.9mm
Radiation Hardening
No
RoHS Status
ROHS3 Compliant
- Datasheets :
- PCN Obsolescence/ EOL :
- PCN Design/Specification :
microchiptechnology-ata8204p3ctkqw-pcndesignspecification-9786.pdf
- PCN Packaging :
- ConflictMineralStatement :
microchip-dsc1123ci5400000-conflictmineralstatement-4089.pdf
AT88SC0104CA-SH Overview
The ICs is enclosed in the package 8-SOIC (0.154, 3.90mm Width).There is a package named Tube which includes this module.Mounting is done using the Surface Mount method.Basically, integrated circuit is a Secure Memory.The AT88SC0104 family can be searched for similar integrated circuit systems.It is appropriate to apply the ICs to Embedded, Smart Card.In total, there are 8 terminations on the ICs solutions.The ICs applications has a total of 8 pins available to use.It is suggested mounted by Surface Mount.It should be used at integrated circuit chip's temperatures below 85°C to maximize its performance.It is not recommended to operate the integrated circuit system below -40°C operating temperature.It is part of the CryptoMemory? series of electrical ICs applications.A supply voltage of 5.5V can be used with this integrated circuit.There should be no voltage lower than 2.7V for this integrated circuit.There is a capability to deliver voltage at 3/3.3V.4MHz is the logic IC's frequency.Memory type EEPROM is used in this integrated circuit chip.As a result, this memory counts to 128B in terms of its size.
AT88SC0104CA-SH Features
Applications : Embedded, Smart Card
It belongs to CryptoMemory? Series
Supply power of 3/3.3V
Memory Type : EEPROM
Memory Size: 128B
AT88SC0104CA-SH Applications
There are a lot of Microchip Technology AT88SC0104CA-SH Specialized ICs applications.
- Industrial Instruments
- MP3 Players
- Authentication of Medical Sensors and Tools
- Appliances requiring ErP Lot 6 compliance
- IoT Node Authentication
- Adapters requiring ultra low no-load consumption
- Printer Cartridge Identification and Authentication
- Secure Download and Boot
- All converters requiring very low standby power
- DeviceNet Applications
- ImagePart NumberManufacturerPackage / CaseNumber of PinsMemory TypeDensityAccess TimeFrequencyInterfaceMin Supply VoltageView Compare
AT88SC0104CA-SH
Microchip Technology8-SOIC (0.154, 3.90mm Width)
8
EEPROM
1 kb
250 ns
4 MHz
2-Wire, I2C, Serial
2.7 V
CAT93C46VI-GT3ON Semiconductor8-SOIC (0.154, 3.90mm Width)
8
Non-Volatile
1 kb
250 ns
-
Serial
-
AT88SC0104CA-SH
VS
CAT93C46VI-GT3
93LC46B-I/SNMicrochip Technology8-SOIC (0.154, 3.90mm Width)
8
Non-Volatile
1 kb
250 ns
-
Serial
-
AT88SC0104CA-SH
VS
93LC46B-I/SN
- 93LC46C-I/SNMicrochip Technology
8-SOIC (0.154, 3.90mm Width)
8
Non-Volatile
1 kb
200 ns
-
2-Wire, Serial
-
AT88SC0104CA-SH
VS
93LC46C-I/SN
- 93LC46A-I/SNMicrochip Technology
8-SOIC (0.154, 3.90mm Width)
8
Non-Volatile
1 kb
250 ns
-
Serial
-
AT88SC0104CA-SH
VS
93LC46A-I/SN
Aztec Electronics's Payment Terms
Aztec Electronics offers many types of payment options, and support in multiple currencies such as GBP, US dollars, RMB, etc. As relationships are built, payment plans can be established so that payments can be made on a predetermined time frame after receipt of the invoice.
T/T IN ADVANCE (Pay at time of order placement via wire transfer)
How to Ship Electronic Components?
We take great care when shipping electronics overseas. Both the U.S. and U.K. governments have imposed restrictions on air transport of electronics, according to the International Air Transport Association.
1. Understand the shipping rules of the destination country
Different countries have different regulations for shipping electronic equipment, check for certain certifications, and read the destination country's guidelines before shipping to prevent delays or confiscation of goods by customs.
2. Choose a reliable express logistics provider
From providing pick-up service to checking the status with real-time order number, conveniently track packages. At present, the logistics providers we cooperate with more include DHL, UPS, Fedex, TXT.
Of course, if you have a long-term cooperative freight forwarder or your own company's logistics account, you can pick up the goods directly from our warehouse
3. How much does it cost to ship the electronic components?
The shipping cost of electronic products depends on the size and weight of the package and the shipping distance. You can first ask us about the size/weight of the products we sell to estimate the shipping cost.
4. How long does it take to ship the electronic components?
If electronic component in stock, it is usually shipped before 5 o'clock on the same day, and it usually takes 5-10 working days to complete it by international express.
If it is a scheduled component, it needs to wait for the arrival of the parts, and then it will be inspected before delivery. If there are special circumstances, the sales staff will confirm with you. Weekends and holidays will also affect the delivery time of electronic products.
1. We provide 365 days warranty for all electronic components.
2. If you need a test report, please let us know. We have a long-term cooperative testing laboratory. If you have familiar testing laboratory, we can also ship to your designated laboratory for testing.
3. Where does Aztec Electronics mainly purchase electronic components from?
Distributors, free market, 48 global large-scale OEM factories in close contact with us (Great Price advantage, 100% original)
2.Are the Microchip Technology's AT88SC0104CA-SH price and stock displayed on the website accurate?
Aztec Electronics inventory fluctuates greatly and cannot be updated in time, it is recommended to confirm the order with Aztec Electronics salesperson or online customer service before payment.
You Also Ask
- How to test electronic components and quality inspections?
- How to transport your electronic components safely?
Need Any Service, please feel free contact us.
After the electronic components have passed the quality inspection of Aztec Electronics, there are generally the following five packaging forms for electronic components: Tape, Tube, Tray, Bulk and Ammo.
Tape/Reel | Tube | Tray | Bulk | Ammo |
Weave bulk chips into tapes and pack them into reels through SMD components packaging Tape Machine. Reel is the most commonly used. | When packaging, arrange the components in the same direction and put them into plastic tubes one at a time. | Choose tray package with the same specifications as the original manufacturer, put the components into the tray and use the strapping machine. | Bulk packaging means that the SMD components are freely packaged in a formed plastic box or bag. | Adhesive tape cut continuously in predetermined quantities. The cut strips are placed in boxes for safekeeping. |
Choose electronic components that are vacuum-sealed against water, dust, moisture, oxidation, corrosion, and even UV or RF pollution.
How to pack electronic components in cartons?
1. Choose the right box for your electronic components2. Use anti-static bubble film protect electronic component
3. Put it into the box, no buffer dead corner, 360-degree package.
4. Labeled as fragile to ensure that the courier knows what needs to be done with the package.
