Microchip Technology MCP23017-E/SP
MCP23017-E/SP
Please send RFQ , we will respond immediately.
Microchip Technology MCP23017-E/SP information
Type
Parameter
Factory Lead Time
12 Weeks
Mount
Surface Mount, Through Hole
Mounting Type
Through Hole
Package / Case
28-DIP (0.300, 7.62mm)
Number of Pins
28
Operating Temperature
-40°C~125°C
Packaging
Tube
Published
2006
JESD-609 Code
e3
Feature
POR
Pbfree Code
yes
Part Status
Active
Moisture Sensitivity Level (MSL)
1 (Unlimited)
Number of Terminations
28
ECCN Code
EAR99
Terminal Finish
Matte Tin (Sn)
Technology
CMOS
Voltage - Supply
1.8V~5.5V
Terminal Position
DUAL
Peak Reflow Temperature (Cel)
NOT APPLICABLE
Supply Voltage
5V
Terminal Pitch
2.54mm
Reflow Temperature-Max (s)
NOT APPLICABLE
Base Part Number
MCP23017
Pin Count
28
Qualification Status
Not Qualified
Output Type
Push-Pull
Power Supplies
5V
Number of Channels
1
Interface
I2C
Number of I/O
16
Number of Ports
2
Nominal Supply Current
1mA
Number of Bits
16
Clock Frequency
1.7MHz
Interrupt Output
Yes
Current - Output Source/Sink
25mA
Height Seated (Max)
5.08mm
Width
7.62mm
REACH SVHC
No SVHC
RoHS Status
ROHS3 Compliant
Lead Free
Lead Free
- Datasheets :
- PCN Design/Specification :
- PCN Packaging :
- ConflictMineralStatement :
microchip-dsc1123ci5400000-conflictmineralstatement-4089.pdf
MCP23017-E/SP Overview
The board has been programmed with 16 I/Os.28-DIP (0.300, 7.62mm) packaging contains the device.In addition, it is available in a Tube case as well.It is supplied votage within 1.8V~5.5V.The mounting type recommended for it is Through Hole.Working temperature range -40°C~125°C is required for the device.In terms of performance, its output frequency is 1.7MHz.I would say that it has 28 terminations as a whole.In total, the part has 28 pins.There is voltage at 5V provided by the device.To run NOT APPLICABLE, we use the peak reflow temperature of this part.2 ports are available on the device in total.The MCP23017 family of parts can be used to identify related parts.This device can also be used to establish POR.16 is the number of bits on an IC chip.This can deliver the power to 5V in a very efficient manner.There are 28 pins on the device.Surface Mount, Through Hole can be used to mount the part.In this device, there are 1 channels.
MCP23017-E/SP Features
MCP23017-E/SP Applications
There are a lot of Microchip Technology MCP23017-E/SP I/O Expanders applications.
- Wien notch
- Common Mode Voltage Translation
- Signal enhancement
- First order active low-pass filters
- Feedback of phase
- Communication system
- Data Loggers
- Strain Gauges
- Portable/ Handheld Devices
- Particulate Matter sensors
- ImagePart NumberManufacturerPackage / CaseNumber of PinsInterfaceSupply VoltageTechnologyECCN CodeWidthMountView Compare
MCP23017-E/SP
Microchip Technology28-DIP (0.300, 7.62mm)
28
I2C
5 V
CMOS
EAR99
7.62 mm
Surface Mount, Through Hole
- MAX4530CPPMaxim Integrated
20-DIP (0.300, 7.62mm)
20
-
5 V
CMOS
EAR99
7.62 mm
Through Hole
MCP23017-E/SP
VS
MAX4530CPP
- MCP23016-I/SPMicrochip Technology
28-DIP (0.300, 7.62mm)
28
I2C
5 V
CMOS
EAR99
7.62 mm
Through Hole
MCP23017-E/SP
VS
MCP23016-I/SP
- MCP23018-E/SPMicrochip Technology
28-DIP (0.300, 7.62mm)
28
I2C
5 V
CMOS
EAR99
7.62 mm
Through Hole
MCP23017-E/SP
VS
MCP23018-E/SP
- HIN238CPIntersil (Renesas Electronics America)
DIP
24
-
5 V
CMOS
EAR99
7.62 mm
Through Hole
MCP23017-E/SP
VS
HIN238CP
Aztec Electronics's Payment Terms
Aztec Electronics offers many types of payment options, and support in multiple currencies such as GBP, US dollars, RMB, etc. As relationships are built, payment plans can be established so that payments can be made on a predetermined time frame after receipt of the invoice.
T/T IN ADVANCE (Pay at time of order placement via wire transfer)
How to Ship Electronic Components?
We take great care when shipping electronics overseas. Both the U.S. and U.K. governments have imposed restrictions on air transport of electronics, according to the International Air Transport Association.
1. Understand the shipping rules of the destination country
Different countries have different regulations for shipping electronic equipment, check for certain certifications, and read the destination country's guidelines before shipping to prevent delays or confiscation of goods by customs.
2. Choose a reliable express logistics provider
From providing pick-up service to checking the status with real-time order number, conveniently track packages. At present, the logistics providers we cooperate with more include DHL, UPS, Fedex, TXT.
Of course, if you have a long-term cooperative freight forwarder or your own company's logistics account, you can pick up the goods directly from our warehouse
3. How much does it cost to ship the electronic components?
The shipping cost of electronic products depends on the size and weight of the package and the shipping distance. You can first ask us about the size/weight of the products we sell to estimate the shipping cost.
4. How long does it take to ship the electronic components?
If electronic component in stock, it is usually shipped before 5 o'clock on the same day, and it usually takes 5-10 working days to complete it by international express.
If it is a scheduled component, it needs to wait for the arrival of the parts, and then it will be inspected before delivery. If there are special circumstances, the sales staff will confirm with you. Weekends and holidays will also affect the delivery time of electronic products.
1. We provide 365 days warranty for all electronic components.
2. If you need a test report, please let us know. We have a long-term cooperative testing laboratory. If you have familiar testing laboratory, we can also ship to your designated laboratory for testing.
3. Where does Aztec Electronics mainly purchase electronic components from?
Distributors, free market, 48 global large-scale OEM factories in close contact with us (Great Price advantage, 100% original)
2.Are the Microchip Technology's MCP23017-E/SP price and stock displayed on the website accurate?
Aztec Electronics inventory fluctuates greatly and cannot be updated in time, it is recommended to confirm the order with Aztec Electronics salesperson or online customer service before payment.
You Also Ask
- How to test electronic components and quality inspections?
- How to transport your electronic components safely?
Need Any Service, please feel free contact us.
After the electronic components have passed the quality inspection of Aztec Electronics, there are generally the following five packaging forms for electronic components: Tape, Tube, Tray, Bulk and Ammo.
Tape/Reel | Tube | Tray | Bulk | Ammo |
Weave bulk chips into tapes and pack them into reels through SMD components packaging Tape Machine. Reel is the most commonly used. | When packaging, arrange the components in the same direction and put them into plastic tubes one at a time. | Choose tray package with the same specifications as the original manufacturer, put the components into the tray and use the strapping machine. | Bulk packaging means that the SMD components are freely packaged in a formed plastic box or bag. | Adhesive tape cut continuously in predetermined quantities. The cut strips are placed in boxes for safekeeping. |
Choose electronic components that are vacuum-sealed against water, dust, moisture, oxidation, corrosion, and even UV or RF pollution.
How to pack electronic components in cartons?
1. Choose the right box for your electronic components2. Use anti-static bubble film protect electronic component
3. Put it into the box, no buffer dead corner, 360-degree package.
4. Labeled as fragile to ensure that the courier knows what needs to be done with the package.