Advanced Linear Devices Inc. ALD4303ASBL
ALD4303ASBL
Please send RFQ , we will respond immediately.
Advanced Linear Devices Inc. ALD4303ASBL information
Type
Parameter
Factory Lead Time
8 Weeks
Mount
Surface Mount
Mounting Type
Surface Mount
Package / Case
14-SOIC (0.154, 3.90mm Width)
Number of Pins
14
Supplier Device Package
14-SOIC
Operating Temperature
0°C~70°C
Packaging
Tube
Published
2005
Part Status
Active
Moisture Sensitivity Level (MSL)
1 (Unlimited)
Type
General Purpose
Max Operating Temperature
70°C
Min Operating Temperature
0°C
Max Power Dissipation
600mW
Output Type
CMOS, NMOS, Open-Drain, TTL
Number of Elements
4
Number of Channels
4
Max Supply Voltage
12V
Min Supply Voltage
3V
Nominal Supply Current
90μA
Output Current
60mA
Max Supply Current
90μA
Quiescent Current
90μA
Response Time
6.5 μs
Voltage - Supply, Single/Dual (±)
3V~10V ±1.5V~5V
Output Current per Channel
60mA
Input Offset Voltage (Vos)
5mV
Voltage Gain
100dB
Max Input Current
30pA
Input Bias Current
1nA
Current - Quiescent (Max)
90μA
Voltage - Input Offset (Max)
5mV @ 5V
Current - Input Bias (Max)
30pA @ 5V
Current - Output (Typ)
60mA @ 5V
RoHS Status
ROHS3 Compliant
- Datasheets :
ALD4303ASBL Overview
To facilitate transportation, it comes packaged in 14-SOIC (0.154, 3.90mm Width) .Output type of this comparator is CMOS, NMOS, Open-Drain, TTL .This device is designed in Tube case.Speaking of types, this is a typical General Purpose comparator.A total of 4 elements can be found in it.Electronic comparator is recommended to mount using type Surface Mount .Electronic comparator is recommended that you set the operating temperature to 0°C~70°C in order to prevent malfunctions.There are 14 pins on the comparator.A quiescent current of 90μA is observed in this comparator.A Surface Mount is provided for mounting it onto a PCB or another board.For normal use of the device, the nominal supply current should be 90μA .A current supply greater than 90μA may cause the comparator to malfunction.Electronic comparator is possible to input a maximum of 30pA current into the device.The voltage gain of the part is indicated by 100dB in the voltage formula.An increase in temperature over 70°C is not recommended.Comparator electronics is not suComparator electronicsable for temperatures below 0°C .A comparator's maximum supply voltage is 12V .This comparator allows minimum supply voltage of 3V .For the output to be of high quality, 4 channels must cooperate together.
ALD4303ASBL Features
CMOS, NMOS, Open-Drain, TTL output capability
General Purpose IC
Employing 4 elements
Operates under 0°C~70°C
Quiescent Current: 90μA
Voltage Gain: 100dB
ALD4303ASBL Applications
There are a lot of Advanced Linear Devices Inc. ALD4303ASBL linear comparators applications.
- Wearable Devices
- Pulse, Squarewave, and Time Delay Generators
- Simple Analog-to-Digital Converters (ADCs)
- Window Comparators
- Consumer Medical Electronics
- Lithium ion battery monitoring
- Power management
- Body Control Modules
- Limit Comparators
- Laptop Computers
- ImagePart NumberManufacturerPackage / CaseNumber of PinsInput Offset Voltage (Vos)Min Supply VoltageMax Supply VoltageMounting TypeMoisture Sensitivity Level (MSL)View Compare
ALD4303ASBL
Advanced Linear Devices Inc.14-SOIC (0.154, 3.90mm Width)
14
5 mV
3 V
12 V
Surface Mount
1 (Unlimited)
LM339DR2GON Semiconductor14-SOIC (0.154, 3.90mm Width)
14
5 mV
-
-
Surface Mount
1 (Unlimited)
ALD4303ASBL
VS
LM339DR2G
- LM339DGON Semiconductor
14-SOIC (0.154, 3.90mm Width)
14
5 mV
-
-
Surface Mount
1 (Unlimited)
ALD4303ASBL
VS
LM339DG
- LM239DR2GON Semiconductor
14-SOIC (0.154, 3.90mm Width)
14
5 mV
-
-
Surface Mount
1 (Unlimited)
ALD4303ASBL
VS
LM239DR2G
TLC339IDRNA14-SOIC (0.154, 3.90mm Width)
14
5 mV
-
-
Surface Mount
1 (Unlimited)
ALD4303ASBL
VS
TLC339IDR
Aztec Electronics's Payment Terms
Aztec Electronics offers many types of payment options, and support in multiple currencies such as GBP, US dollars, RMB, etc. As relationships are built, payment plans can be established so that payments can be made on a predetermined time frame after receipt of the invoice.
T/T IN ADVANCE (Pay at time of order placement via wire transfer)
How to Ship Electronic Components?
We take great care when shipping electronics overseas. Both the U.S. and U.K. governments have imposed restrictions on air transport of electronics, according to the International Air Transport Association.
1. Understand the shipping rules of the destination country
Different countries have different regulations for shipping electronic equipment, check for certain certifications, and read the destination country's guidelines before shipping to prevent delays or confiscation of goods by customs.
2. Choose a reliable express logistics provider
From providing pick-up service to checking the status with real-time order number, conveniently track packages. At present, the logistics providers we cooperate with more include DHL, UPS, Fedex, TXT.
Of course, if you have a long-term cooperative freight forwarder or your own company's logistics account, you can pick up the goods directly from our warehouse
3. How much does it cost to ship the electronic components?
The shipping cost of electronic products depends on the size and weight of the package and the shipping distance. You can first ask us about the size/weight of the products we sell to estimate the shipping cost.
4. How long does it take to ship the electronic components?
If electronic component in stock, it is usually shipped before 5 o'clock on the same day, and it usually takes 5-10 working days to complete it by international express.
If it is a scheduled component, it needs to wait for the arrival of the parts, and then it will be inspected before delivery. If there are special circumstances, the sales staff will confirm with you. Weekends and holidays will also affect the delivery time of electronic products.
1. We provide 365 days warranty for all electronic components.
2. If you need a test report, please let us know. We have a long-term cooperative testing laboratory. If you have familiar testing laboratory, we can also ship to your designated laboratory for testing.
3. Where does Aztec Electronics mainly purchase electronic components from?
Distributors, free market, 48 global large-scale OEM factories in close contact with us (Great Price advantage, 100% original)
2.Are the Advanced Linear Devices, Inc.'s ALD4303ASBL price and stock displayed on the website accurate?
Aztec Electronics inventory fluctuates greatly and cannot be updated in time, it is recommended to confirm the order with Aztec Electronics salesperson or online customer service before payment.
You Also Ask
- How to test electronic components and quality inspections?
- How to transport your electronic components safely?
Need Any Service, please feel free contact us.
After the electronic components have passed the quality inspection of Aztec Electronics, there are generally the following five packaging forms for electronic components: Tape, Tube, Tray, Bulk and Ammo.
Tape/Reel | Tube | Tray | Bulk | Ammo |
Weave bulk chips into tapes and pack them into reels through SMD components packaging Tape Machine. Reel is the most commonly used. | When packaging, arrange the components in the same direction and put them into plastic tubes one at a time. | Choose tray package with the same specifications as the original manufacturer, put the components into the tray and use the strapping machine. | Bulk packaging means that the SMD components are freely packaged in a formed plastic box or bag. | Adhesive tape cut continuously in predetermined quantities. The cut strips are placed in boxes for safekeeping. |
Choose electronic components that are vacuum-sealed against water, dust, moisture, oxidation, corrosion, and even UV or RF pollution.
How to pack electronic components in cartons?
1. Choose the right box for your electronic components2. Use anti-static bubble film protect electronic component
3. Put it into the box, no buffer dead corner, 360-degree package.
4. Labeled as fragile to ensure that the courier knows what needs to be done with the package.
