Advanced Linear Devices Inc. ALD2332SAL
ALD2332SAL
Please send RFQ , we will respond immediately.
Advanced Linear Devices Inc. ALD2332SAL information
Type
Parameter
Factory Lead Time
8 Weeks
Mount
Surface Mount
Mounting Type
Surface Mount
Package / Case
8-SOIC (0.154, 3.90mm Width)
Number of Pins
8
Operating Temperature
0°C~70°C
Packaging
Tube
Published
2010
Series
EPAD®
Pbfree Code
yes
Part Status
Active
Moisture Sensitivity Level (MSL)
1 (Unlimited)
Type
General Purpose
Max Power Dissipation
600mW
Reach Compliance Code
unknown
Pin Count
8
Output Type
CMOS, NMOS, Push-Pull, TTL
Number of Elements
2
Number of Channels
3
Nominal Supply Current
500μA
Output Current
50mA
Max Supply Current
500μA
Propagation Delay
400 ns
Quiescent Current
500μA
Response Time
1.1 μs
Common Mode Rejection Ratio
75 dB
Voltage - Supply, Single/Dual (±)
4V~10V ±2V~5V
Input Offset Voltage (Vos)
2mV
Voltage Gain
103.52dB
Power Supply Rejection Ratio (PSRR)
75dB
Input Bias Current
20pA
Voltage - Input Offset (Max)
2mV @ 5V
Current - Input Bias (Max)
20pA @ 5V
CMRR, PSRR (Typ)
80dB CMRR, 75dB PSRR
Current - Output (Typ)
50mA @ 5V
RoHS Status
ROHS3 Compliant
- Datasheets :
ALD2332SAL Overview
To facilitate transportation, it comes packaged in 8-SOIC (0.154, 3.90mm Width) .There is a CMOS, NMOS, Push-Pull, TTL output type for this comparator.The part will be shipped by Tube .Electronic comparator can be classified as a General Purpose chip.This element consists of 2 elements in total.There are 8 pins on this board.Surface Mount universial mout for easy adapting.Electronic comparator is recommended that the operating temperature be set to 0°C~70°C to prevent malfunctions.Electronic comparator has 8 pins.There is a quiescent current of 500μA in this comparator.There is a Surface Mount for mounting it on a PCB or other board.The nominal supply current of the device should be 500μA for normal use.Electronic comparator is possible for the comparator to malfunction when the current supply exceeds 500μA .Comparator electronics is clear from the voltage formula that the voltage gain of the part is 103.52dB .To ensure a high level of output quality, 3 channels work together.The part is from EPAD? comparator series.
ALD2332SAL Features
CMOS, NMOS, Push-Pull, TTL output capability
General Purpose IC
Employing 2 elements
Operates under 0°C~70°C
Quiescent Current: 500μA
Voltage Gain: 103.52dB
ALD2332SAL Applications
There are a lot of Advanced Linear Devices Inc. ALD2332SAL linear comparators applications.
- Wireless Base Stations
- System control and monitoring
- Window Comparators
- Battery-Powered Electronics
- General-Purpose, Low-Voltage Applications
- Infotainment and Clusters
- Notebooks and PDAs
- Industrial
- Factory automation & control
- Body Control Modules
- ImagePart NumberManufacturerPackage / CaseNumber of PinsInput Offset Voltage (Vos)Propagation DelayPower Supply Rejection Ratio (PSRR)Common Mode Rejection RatioRoHS StatusMountView Compare
ALD2332SAL
Advanced Linear Devices Inc.8-SOIC (0.154, 3.90mm Width)
8
2 mV
400 ns
75 dB
75 dB
ROHS3 Compliant
Surface Mount
MAX907CSA+Maxim Integrated8-SOIC (0.154, 3.90mm Width)
8
2 mV
50 ns
86.02 dB
86.02 dB
ROHS3 Compliant
Surface Mount
ALD2332SAL
VS
MAX907CSA+
- MAX907CSA+TMaxim Integrated
8-SOIC (0.154, 3.90mm Width)
8
2 mV
40 ns
86.02 dB
86.02 dB
ROHS3 Compliant
Surface Mount
ALD2332SAL
VS
MAX907CSA+T
ADCMP391ARZAnalog Devices Inc.8-SOIC (0.154, 3.90mm Width)
8
2.5 mV
4.2 μs
80 dB
74 dB
ROHS3 Compliant
Surface Mount
ALD2332SAL
VS
ADCMP391ARZ
- MAX942CSA+Maxim Integrated
8-SOIC (0.154, 3.90mm Width)
8
2 mV
80 ns
81.94 dB
81.94 dB
ROHS3 Compliant
Surface Mount
ALD2332SAL
VS
MAX942CSA+
Aztec Electronics's Payment Terms
Aztec Electronics offers many types of payment options, and support in multiple currencies such as GBP, US dollars, RMB, etc. As relationships are built, payment plans can be established so that payments can be made on a predetermined time frame after receipt of the invoice.
T/T IN ADVANCE (Pay at time of order placement via wire transfer)
How to Ship Electronic Components?
We take great care when shipping electronics overseas. Both the U.S. and U.K. governments have imposed restrictions on air transport of electronics, according to the International Air Transport Association.
1. Understand the shipping rules of the destination country
Different countries have different regulations for shipping electronic equipment, check for certain certifications, and read the destination country's guidelines before shipping to prevent delays or confiscation of goods by customs.
2. Choose a reliable express logistics provider
From providing pick-up service to checking the status with real-time order number, conveniently track packages. At present, the logistics providers we cooperate with more include DHL, UPS, Fedex, TXT.
Of course, if you have a long-term cooperative freight forwarder or your own company's logistics account, you can pick up the goods directly from our warehouse
3. How much does it cost to ship the electronic components?
The shipping cost of electronic products depends on the size and weight of the package and the shipping distance. You can first ask us about the size/weight of the products we sell to estimate the shipping cost.
4. How long does it take to ship the electronic components?
If electronic component in stock, it is usually shipped before 5 o'clock on the same day, and it usually takes 5-10 working days to complete it by international express.
If it is a scheduled component, it needs to wait for the arrival of the parts, and then it will be inspected before delivery. If there are special circumstances, the sales staff will confirm with you. Weekends and holidays will also affect the delivery time of electronic products.
1. We provide 365 days warranty for all electronic components.
2. If you need a test report, please let us know. We have a long-term cooperative testing laboratory. If you have familiar testing laboratory, we can also ship to your designated laboratory for testing.
3. Where does Aztec Electronics mainly purchase electronic components from?
Distributors, free market, 48 global large-scale OEM factories in close contact with us (Great Price advantage, 100% original)
2.Are the Advanced Linear Devices, Inc.'s ALD2332SAL price and stock displayed on the website accurate?
Aztec Electronics inventory fluctuates greatly and cannot be updated in time, it is recommended to confirm the order with Aztec Electronics salesperson or online customer service before payment.
You Also Ask
- How to test electronic components and quality inspections?
- How to transport your electronic components safely?
Need Any Service, please feel free contact us.
After the electronic components have passed the quality inspection of Aztec Electronics, there are generally the following five packaging forms for electronic components: Tape, Tube, Tray, Bulk and Ammo.
Tape/Reel | Tube | Tray | Bulk | Ammo |
Weave bulk chips into tapes and pack them into reels through SMD components packaging Tape Machine. Reel is the most commonly used. | When packaging, arrange the components in the same direction and put them into plastic tubes one at a time. | Choose tray package with the same specifications as the original manufacturer, put the components into the tray and use the strapping machine. | Bulk packaging means that the SMD components are freely packaged in a formed plastic box or bag. | Adhesive tape cut continuously in predetermined quantities. The cut strips are placed in boxes for safekeeping. |
Choose electronic components that are vacuum-sealed against water, dust, moisture, oxidation, corrosion, and even UV or RF pollution.
How to pack electronic components in cartons?
1. Choose the right box for your electronic components2. Use anti-static bubble film protect electronic component
3. Put it into the box, no buffer dead corner, 360-degree package.
4. Labeled as fragile to ensure that the courier knows what needs to be done with the package.
