Advanced Linear Devices Inc. ALD2321SCL
ALD2321SCL
Please send RFQ , we will respond immediately.
Advanced Linear Devices Inc. ALD2321SCL information
Type
Parameter
Factory Lead Time
8 Weeks
Mount
Surface Mount
Mounting Type
Surface Mount
Package / Case
16-SOIC (0.154, 3.90mm Width)
Number of Pins
16
Supplier Device Package
16-SOIC
Operating Temperature
0°C~70°C
Packaging
Tube
Published
2004
Series
EPAD®
Part Status
Active
Moisture Sensitivity Level (MSL)
1 (Unlimited)
Type
General Purpose
Max Operating Temperature
70°C
Min Operating Temperature
0°C
Max Power Dissipation
600mW
Output Type
CMOS, Complementary, NMOS, Open-Drain, Push-Pull, TTL
Number of Elements
2
Number of Channels
2
Max Supply Voltage
10V
Min Supply Voltage
3V
Nominal Supply Current
180μA
Output Current
50mA
Max Supply Current
180μA
Quiescent Current
180μA
Response Time
2.4 μs
Common Mode Rejection Ratio
75 dB
Voltage - Supply, Single/Dual (±)
4V~10V ±2V~5V
Output Current per Channel
50mA
Input Offset Voltage (Vos)
1mV
Input Bias Current
20pA
Current - Quiescent (Max)
180μA
Voltage - Input Offset (Max)
1mV @ 5V
Current - Input Bias (Max)
20pA @ 5V
CMRR, PSRR (Typ)
80dB CMRR, 75dB PSRR
RoHS Status
ROHS3 Compliant
- Datasheets :
ALD2321SCL Overview
To facilitate transportation, it comes packaged in 16-SOIC (0.154, 3.90mm Width) .The comparator has a type CMOS, Complementary, NMOS, Open-Drain, Push-Pull, TTL output.As a result, it is designed with Tube package.In terms of type, this is a typical General Purpose comparator.This is a 2 element comparator.The recommended mounting type is Surface Mount .Electronic comparator is recommended that the operating temperature be set to 0°C~70°C to prevent malfunctions.The comparator consists of 16 pins.The comparator presents a quiescent current of 180μA volts.The PCB or other board can be mounted using the Surface Mount on it.Electronic comparator is recommended that the nominal supply current for the device be set to 180μA .A supply current exceeding 180μA may result in the comparator malfunctioning.Keeping the temperature below 70°C is not recommended.Comparator electronics will not be able to function at temperatures below 0°C .A comparator's maximum supply voltage is 10V volts.A minimum supply voltage of 3V is permitted for this comparator.The output quality of 2 channels is maintained by cooperating with each other.A comparator part from the EPAD? series is used in this part.
ALD2321SCL Features
CMOS, Complementary, NMOS, Open-Drain, Push-Pull, TTL output capability
General Purpose IC
Employing 2 elements
Operates under 0°C~70°C
Quiescent Current: 180μA
ALD2321SCL Applications
There are a lot of Advanced Linear Devices Inc. ALD2321SCL linear comparators applications.
- Portable Battery Monitoring
- Threshold Detectors
- General-Purpose, Low-Voltage Applications
- General-Purpose Portable Devices
- Power management
- Infotainment and Clusters
- Battery-Powered Electronics
- Mobile Communications
- Window Comparators
- Factory automation & control
- ImagePart NumberManufacturerPackage / CaseNumber of PinsInput Offset Voltage (Vos)Common Mode Rejection RatioMin Supply VoltageMax Supply VoltageRoHS StatusMountView Compare
ALD2321SCL
Advanced Linear Devices Inc.16-SOIC (0.154, 3.90mm Width)
16
1 mV
75 dB
3 V
10 V
ROHS3 Compliant
Surface Mount
MAX924ESE+Maxim Integrated16-SOIC (0.154, 3.90mm Width)
16
10 mV
80 dB
-
-
ROHS3 Compliant
Surface Mount
ALD2321SCL
VS
MAX924ESE+
- MAX901BCSE+Maxim Integrated
16-SOIC (0.154, 3.90mm Width)
16
4 mV
80 dB
-
-
ROHS3 Compliant
Surface Mount
ALD2321SCL
VS
MAX901BCSE+
TS864IDTSTMicroelectronics14-SOIC (0.154, 3.90mm Width)
14
15 mV
70 dB
-
-
ROHS3 Compliant
Surface Mount
ALD2321SCL
VS
TS864IDT
- MAX934ESE+Maxim Integrated
16-SOIC (0.154, 3.90mm Width)
16
10 mV
80 dB
-
-
ROHS3 Compliant
Surface Mount
ALD2321SCL
VS
MAX934ESE+
Aztec Electronics's Payment Terms
Aztec Electronics offers many types of payment options, and support in multiple currencies such as GBP, US dollars, RMB, etc. As relationships are built, payment plans can be established so that payments can be made on a predetermined time frame after receipt of the invoice.
T/T IN ADVANCE (Pay at time of order placement via wire transfer)
How to Ship Electronic Components?
We take great care when shipping electronics overseas. Both the U.S. and U.K. governments have imposed restrictions on air transport of electronics, according to the International Air Transport Association.
1. Understand the shipping rules of the destination country
Different countries have different regulations for shipping electronic equipment, check for certain certifications, and read the destination country's guidelines before shipping to prevent delays or confiscation of goods by customs.
2. Choose a reliable express logistics provider
From providing pick-up service to checking the status with real-time order number, conveniently track packages. At present, the logistics providers we cooperate with more include DHL, UPS, Fedex, TXT.
Of course, if you have a long-term cooperative freight forwarder or your own company's logistics account, you can pick up the goods directly from our warehouse
3. How much does it cost to ship the electronic components?
The shipping cost of electronic products depends on the size and weight of the package and the shipping distance. You can first ask us about the size/weight of the products we sell to estimate the shipping cost.
4. How long does it take to ship the electronic components?
If electronic component in stock, it is usually shipped before 5 o'clock on the same day, and it usually takes 5-10 working days to complete it by international express.
If it is a scheduled component, it needs to wait for the arrival of the parts, and then it will be inspected before delivery. If there are special circumstances, the sales staff will confirm with you. Weekends and holidays will also affect the delivery time of electronic products.
1. We provide 365 days warranty for all electronic components.
2. If you need a test report, please let us know. We have a long-term cooperative testing laboratory. If you have familiar testing laboratory, we can also ship to your designated laboratory for testing.
3. Where does Aztec Electronics mainly purchase electronic components from?
Distributors, free market, 48 global large-scale OEM factories in close contact with us (Great Price advantage, 100% original)
2.Are the Advanced Linear Devices, Inc.'s ALD2321SCL price and stock displayed on the website accurate?
Aztec Electronics inventory fluctuates greatly and cannot be updated in time, it is recommended to confirm the order with Aztec Electronics salesperson or online customer service before payment.
You Also Ask
- How to test electronic components and quality inspections?
- How to transport your electronic components safely?
Need Any Service, please feel free contact us.
After the electronic components have passed the quality inspection of Aztec Electronics, there are generally the following five packaging forms for electronic components: Tape, Tube, Tray, Bulk and Ammo.
Tape/Reel | Tube | Tray | Bulk | Ammo |
Weave bulk chips into tapes and pack them into reels through SMD components packaging Tape Machine. Reel is the most commonly used. | When packaging, arrange the components in the same direction and put them into plastic tubes one at a time. | Choose tray package with the same specifications as the original manufacturer, put the components into the tray and use the strapping machine. | Bulk packaging means that the SMD components are freely packaged in a formed plastic box or bag. | Adhesive tape cut continuously in predetermined quantities. The cut strips are placed in boxes for safekeeping. |
Choose electronic components that are vacuum-sealed against water, dust, moisture, oxidation, corrosion, and even UV or RF pollution.
How to pack electronic components in cartons?
1. Choose the right box for your electronic components2. Use anti-static bubble film protect electronic component
3. Put it into the box, no buffer dead corner, 360-degree package.
4. Labeled as fragile to ensure that the courier knows what needs to be done with the package.
