Advanced Linear Devices Inc. ALD2321BPCL
ALD2321BPCL
Advanced Linear Devices Inc. ALD2321BPCL information
Type
Parameter
Factory Lead Time
8 Weeks
Mount
Through Hole
Mounting Type
Through Hole
Package / Case
16-DIP (0.300, 7.62mm)
Number of Pins
16
Supplier Device Package
16-PDIP
Operating Temperature
0°C~70°C
Packaging
Tube
Published
2004
Series
EPAD®
Part Status
Active
Moisture Sensitivity Level (MSL)
1 (Unlimited)
Type
General Purpose
Max Operating Temperature
70°C
Min Operating Temperature
0°C
Max Power Dissipation
600mW
Output Type
CMOS, Complementary, NMOS, Open-Drain, Push-Pull, TTL
Number of Elements
2
Number of Channels
2
Max Supply Voltage
10V
Min Supply Voltage
3V
Nominal Supply Current
180μA
Output Current
50mA
Max Supply Current
180μA
Quiescent Current
180μA
Response Time
1.1 μs
Common Mode Rejection Ratio
75 dB
Voltage - Supply, Single/Dual (±)
4V~10V ±2V~5V
Output Current per Channel
50mA
Input Offset Voltage (Vos)
500μV
Max Input Current
20pA
Input Bias Current
20pA
Current - Quiescent (Max)
180μA
Voltage - Input Offset (Max)
0.5mV @ 5V
Current - Input Bias (Max)
20pA @ 5V
CMRR, PSRR (Typ)
80dB CMRR, 75dB PSRR
RoHS Status
ROHS3 Compliant
- Datasheets :
ALD2321BPCL Overview
To facilitate transportation, it comes packaged in 16-DIP (0.300, 7.62mm) .The comparator has a CMOS, Complementary, NMOS, Open-Drain, Push-Pull, TTL output.The part is shipped by Tube .Speaking of types, this is a typical General Purpose comparator.There are a total of 2 elements in it.Electronic comparator is recommended that you mount the device using type Through Hole .The operating temperature should be set to 0°C~70°C to avoid mal-function.This comparator has 16 pins.There is 180μA current flowing in this comparator.A Through Hole is provided for mounting it onto a PCB or another board.Normal operation of the device requires a nominal supply current of 180μA .A supply current exceeding 180μA may result in the comparator malfunctioning.Electronic comparator is possible to input a maximum of 20pA current into the device.Temperatures above 70°C are not recommended.Temperatures below 0°C are not suitable for the device.A comparator is designed to operate at a maximum supply voltage of 10V .This comparator can be supplied with a voltage as low as 3V .As a result, 2 channels work together to maintain the quality of the output.Comparator electronics is a comparator part from the EPAD? series.
ALD2321BPCL Features
CMOS, Complementary, NMOS, Open-Drain, Push-Pull, TTL output capability
General Purpose IC
Employing 2 elements
Operates under 0°C~70°C
Quiescent Current: 180μA
ALD2321BPCL Applications
There are a lot of Advanced Linear Devices Inc. ALD2321BPCL linear comparators applications.
- RC Timers
- Mobile Communications
- Set Top Boxes
- Appliances
- Motor drives
- System control and monitoring
- High-Speed Differential Line Receiver
- High-Speed Sampling Circuits
- Infotainment and Clusters
- Threshold Detectors
- ImagePart NumberManufacturerPackage / CaseNumber of PinsInput Offset Voltage (Vos)Common Mode Rejection RatioMin Supply VoltageMax Supply VoltageMountPin CountView Compare
ALD2321BPCL
Advanced Linear Devices Inc.16-DIP (0.300, 7.62mm)
16
500 μV
75 dB
3 V
10 V
Through Hole
-
MAX934CPE+Maxim Integrated16-DIP (0.300, 7.62mm)
16
10 mV
80 dB
-
-
Through Hole
16
ALD2321BPCL
VS
MAX934CPE+
- MAX934EPE+Maxim Integrated
16-DIP (0.300, 7.62mm)
16
10 mV
80 dB
-
-
Through Hole
16
ALD2321BPCL
VS
MAX934EPE+
- MAX924EPE+Maxim Integrated
16-DIP (0.300, 7.62mm)
16
10 mV
80 dB
-
-
Through Hole
16
ALD2321BPCL
VS
MAX924EPE+
MC14585BCPON SemiconductorPDIP
16
-
-
3 V
18 V
Through Hole
16
ALD2321BPCL
VS
MC14585BCP
Aztec Electronics's Payment Terms
Aztec Electronics offers many types of payment options, and support in multiple currencies such as GBP, US dollars, RMB, etc. As relationships are built, payment plans can be established so that payments can be made on a predetermined time frame after receipt of the invoice.
T/T IN ADVANCE (Pay at time of order placement via wire transfer)
How to Ship Electronic Components?
We take great care when shipping electronics overseas. Both the U.S. and U.K. governments have imposed restrictions on air transport of electronics, according to the International Air Transport Association.
1. Understand the shipping rules of the destination country
Different countries have different regulations for shipping electronic equipment, check for certain certifications, and read the destination country's guidelines before shipping to prevent delays or confiscation of goods by customs.
2. Choose a reliable express logistics provider
From providing pick-up service to checking the status with real-time order number, conveniently track packages. At present, the logistics providers we cooperate with more include DHL, UPS, Fedex, TXT.
Of course, if you have a long-term cooperative freight forwarder or your own company's logistics account, you can pick up the goods directly from our warehouse
3. How much does it cost to ship the electronic components?
The shipping cost of electronic products depends on the size and weight of the package and the shipping distance. You can first ask us about the size/weight of the products we sell to estimate the shipping cost.
4. How long does it take to ship the electronic components?
If electronic component in stock, it is usually shipped before 5 o'clock on the same day, and it usually takes 5-10 working days to complete it by international express.
If it is a scheduled component, it needs to wait for the arrival of the parts, and then it will be inspected before delivery. If there are special circumstances, the sales staff will confirm with you. Weekends and holidays will also affect the delivery time of electronic products.
1. We provide 365 days warranty for all electronic components.
2. If you need a test report, please let us know. We have a long-term cooperative testing laboratory. If you have familiar testing laboratory, we can also ship to your designated laboratory for testing.
3. Where does Aztec Electronics mainly purchase electronic components from?
Distributors, free market, 48 global large-scale OEM factories in close contact with us (Great Price advantage, 100% original)
2.Are the Advanced Linear Devices, Inc.'s ALD2321BPCL price and stock displayed on the website accurate?
Aztec Electronics inventory fluctuates greatly and cannot be updated in time, it is recommended to confirm the order with Aztec Electronics salesperson or online customer service before payment.
You Also Ask
- How to test electronic components and quality inspections?
- How to transport your electronic components safely?
Need Any Service, please feel free contact us.
After the electronic components have passed the quality inspection of Aztec Electronics, there are generally the following five packaging forms for electronic components: Tape, Tube, Tray, Bulk and Ammo.
Tape/Reel | Tube | Tray | Bulk | Ammo |
Weave bulk chips into tapes and pack them into reels through SMD components packaging Tape Machine. Reel is the most commonly used. | When packaging, arrange the components in the same direction and put them into plastic tubes one at a time. | Choose tray package with the same specifications as the original manufacturer, put the components into the tray and use the strapping machine. | Bulk packaging means that the SMD components are freely packaged in a formed plastic box or bag. | Adhesive tape cut continuously in predetermined quantities. The cut strips are placed in boxes for safekeeping. |
Choose electronic components that are vacuum-sealed against water, dust, moisture, oxidation, corrosion, and even UV or RF pollution.
How to pack electronic components in cartons?
1. Choose the right box for your electronic components2. Use anti-static bubble film protect electronic component
3. Put it into the box, no buffer dead corner, 360-degree package.
4. Labeled as fragile to ensure that the courier knows what needs to be done with the package.
