Advanced Linear Devices Inc. ALD2303ASAL
ALD2303ASAL
Please send RFQ , we will respond immediately.
Advanced Linear Devices Inc. ALD2303ASAL information
Type
Parameter
Factory Lead Time
8 Weeks
Mount
Surface Mount
Mounting Type
Surface Mount
Package / Case
8-SOIC (0.154, 3.90mm Width)
Number of Pins
8
Supplier Device Package
8-SOIC
Operating Temperature
0°C~70°C
Packaging
Tube
Published
2010
Part Status
Active
Moisture Sensitivity Level (MSL)
1 (Unlimited)
Type
General Purpose
Max Operating Temperature
70°C
Min Operating Temperature
0°C
Max Power Dissipation
600mW
Output Type
CMOS, NMOS, Open-Drain, TTL
Number of Elements
2
Number of Channels
2
Max Supply Voltage
12V
Min Supply Voltage
3V
Nominal Supply Current
40μA
Output Current
60mA
Max Supply Current
40μA
Quiescent Current
40μA
Response Time
6.5 μs
Voltage - Supply, Single/Dual (±)
3V~10V ±1.5V~5V
Output Current per Channel
60mA
Input Offset Voltage (Vos)
1mV
Input Bias Current
1nA
Current - Quiescent (Max)
40μA
Voltage - Input Offset (Max)
1mV @ 5V
Current - Input Bias (Max)
0.001μA @ 5V
Current - Output (Typ)
60mA
RoHS Status
ROHS3 Compliant
- Datasheets :
ALD2303ASAL Overview
A convenient packaging is provided in the form of 8-SOIC (0.154, 3.90mm Width) .A comparator with an output type of CMOS, NMOS, Open-Drain, TTL is being used.The part is shipped by Tube .It's a typical General Purpose comparator.Electronic comparator consists of 2 elements in total.Electronic comparator is recommended to mount using type Surface Mount .Electronic comparator is recommended that the operating temperature be set to 0°C~70°C in order to prevent malfunctions.8 pins are present on the comparator.The comparator presents a quiescent current of 40μA volts.There is a Surface Mount on the board for mounting to a PCB or other board.Normal operation of the device requires a nominal supply current of 40μA .A current supply greater than 40μA may result in the comparator malfunctioning.There is no recommendation for temperatures higher than 70°C .Comparator electronics cannot be used at a temperature below 0°C .The maximal supply voltage of the comparator is 12V .This comparator can be supplied with a voltage as low as 3V .The output quality is maintained by the cooperation of 2 channels.
ALD2303ASAL Features
CMOS, NMOS, Open-Drain, TTL output capability
General Purpose IC
Employing 2 elements
Operates under 0°C~70°C
Quiescent Current: 40μA
ALD2303ASAL Applications
There are a lot of Advanced Linear Devices Inc. ALD2303ASAL linear comparators applications.
- Zero-Crossing Detectors
- Window Comparators
- Automotive
- Handheld Instruments
- Self-diagnostics
- Multivibrators and High-Voltage Digital Logic Gates
- Pulse, Squarewave, and Time Delay Generators
- System control and monitoring
- Laptop Computers
- Mobile Phones and Tablets
- ImagePart NumberManufacturerPackage / CaseNumber of PinsInput Offset Voltage (Vos)Min Supply VoltageMax Supply VoltageRoHS StatusMountMoisture Sensitivity Level (MSL)View Compare
ALD2303ASAL
Advanced Linear Devices Inc.8-SOIC (0.154, 3.90mm Width)
8
1 mV
3 V
12 V
ROHS3 Compliant
Surface Mount
1 (Unlimited)
LMP7300MAX/NOPBNA8-SOIC (0.154, 3.90mm Width)
8
750 μV
-
-
ROHS3 Compliant
Surface Mount
1 (Unlimited)
ALD2303ASAL
VS
LMP7300MAX/NOPB
MAX9032ASA+TMaxim Integrated8-SOIC (0.154, 3.90mm Width)
8
1 mV
-
-
ROHS3 Compliant
Surface Mount
1 (Unlimited)
ALD2303ASAL
VS
MAX9032ASA+T
- MAX9042BESA+Maxim Integrated
8-SOIC (0.154, 3.90mm Width)
8
1 mV
-
-
ROHS3 Compliant
Surface Mount
1 (Unlimited)
ALD2303ASAL
VS
MAX9042BESA+
- LMP7300MA/NOPBNA
8-SOIC (0.154, 3.90mm Width)
8
750 μV
-
-
ROHS3 Compliant
Surface Mount
1 (Unlimited)
ALD2303ASAL
VS
LMP7300MA/NOPB
Aztec Electronics's Payment Terms
Aztec Electronics offers many types of payment options, and support in multiple currencies such as GBP, US dollars, RMB, etc. As relationships are built, payment plans can be established so that payments can be made on a predetermined time frame after receipt of the invoice.
T/T IN ADVANCE (Pay at time of order placement via wire transfer)
How to Ship Electronic Components?
We take great care when shipping electronics overseas. Both the U.S. and U.K. governments have imposed restrictions on air transport of electronics, according to the International Air Transport Association.
1. Understand the shipping rules of the destination country
Different countries have different regulations for shipping electronic equipment, check for certain certifications, and read the destination country's guidelines before shipping to prevent delays or confiscation of goods by customs.
2. Choose a reliable express logistics provider
From providing pick-up service to checking the status with real-time order number, conveniently track packages. At present, the logistics providers we cooperate with more include DHL, UPS, Fedex, TXT.
Of course, if you have a long-term cooperative freight forwarder or your own company's logistics account, you can pick up the goods directly from our warehouse
3. How much does it cost to ship the electronic components?
The shipping cost of electronic products depends on the size and weight of the package and the shipping distance. You can first ask us about the size/weight of the products we sell to estimate the shipping cost.
4. How long does it take to ship the electronic components?
If electronic component in stock, it is usually shipped before 5 o'clock on the same day, and it usually takes 5-10 working days to complete it by international express.
If it is a scheduled component, it needs to wait for the arrival of the parts, and then it will be inspected before delivery. If there are special circumstances, the sales staff will confirm with you. Weekends and holidays will also affect the delivery time of electronic products.
1. We provide 365 days warranty for all electronic components.
2. If you need a test report, please let us know. We have a long-term cooperative testing laboratory. If you have familiar testing laboratory, we can also ship to your designated laboratory for testing.
3. Where does Aztec Electronics mainly purchase electronic components from?
Distributors, free market, 48 global large-scale OEM factories in close contact with us (Great Price advantage, 100% original)
2.Are the Advanced Linear Devices, Inc.'s ALD2303ASAL price and stock displayed on the website accurate?
Aztec Electronics inventory fluctuates greatly and cannot be updated in time, it is recommended to confirm the order with Aztec Electronics salesperson or online customer service before payment.
You Also Ask
- How to test electronic components and quality inspections?
- How to transport your electronic components safely?
Need Any Service, please feel free contact us.
After the electronic components have passed the quality inspection of Aztec Electronics, there are generally the following five packaging forms for electronic components: Tape, Tube, Tray, Bulk and Ammo.
Tape/Reel | Tube | Tray | Bulk | Ammo |
Weave bulk chips into tapes and pack them into reels through SMD components packaging Tape Machine. Reel is the most commonly used. | When packaging, arrange the components in the same direction and put them into plastic tubes one at a time. | Choose tray package with the same specifications as the original manufacturer, put the components into the tray and use the strapping machine. | Bulk packaging means that the SMD components are freely packaged in a formed plastic box or bag. | Adhesive tape cut continuously in predetermined quantities. The cut strips are placed in boxes for safekeeping. |
Choose electronic components that are vacuum-sealed against water, dust, moisture, oxidation, corrosion, and even UV or RF pollution.
How to pack electronic components in cartons?
1. Choose the right box for your electronic components2. Use anti-static bubble film protect electronic component
3. Put it into the box, no buffer dead corner, 360-degree package.
4. Labeled as fragile to ensure that the courier knows what needs to be done with the package.
