Texas Instruments SN74HC373PWR
SN74HC373PWR
Please send RFQ , we will respond immediately.
Texas Instruments SN74HC373PWR information
Type
Parameter
Factory Lead Time
6 Weeks
Lifecycle Status
ACTIVE (Last Updated: 5 days ago)
Contact Plating
Gold
Mount
Surface Mount
Mounting Type
Surface Mount
Package / Case
20-TSSOP (0.173, 4.40mm Width)
Number of Pins
20
Weight
76.997305mg
Operating Temperature
-40°C~85°C
Packaging
Cut Tape (CT)
Series
74HC
JESD-609 Code
e4
Pbfree Code
yes
Part Status
Active
Moisture Sensitivity Level (MSL)
1 (Unlimited)
Number of Terminations
20
ECCN Code
EAR99
Subcategory
FF/Latches
Packing Method
TR
Technology
CMOS
Voltage - Supply
2V~6V
Terminal Position
DUAL
Terminal Form
GULL WING
Peak Reflow Temperature (Cel)
260
Number of Functions
1
Supply Voltage
5V
Terminal Pitch
0.65mm
Base Part Number
74HC373
Pin Count
20
Output Type
Tri-State
Operating Supply Voltage
5V
Circuit
8:8
Polarity
Non-Inverting
Supply Voltage-Max (Vsup)
6V
Power Supplies
2/6V
Supply Voltage-Min (Vsup)
2V
Number of Circuits
8
Load Capacitance
50pF
Number of Ports
2
Output Current
7.8mA
Number of Bits
8
Propagation Delay
43 ns
Quiescent Current
8μA
Turn On Delay Time
15 ns
Family
HC/UH
Logic Function
D-Type, Latch
Current - Output High, Low
7.8mA 7.8mA
Logic Type
D-Type Transparent Latch
Control Type
ENABLE LOW
Number of Input Lines
3
Independent Circuits
1
Count Direction
UNIDIRECTIONAL
Height
1.2mm
Length
6.5mm
Width
4.4mm
Thickness
1mm
Radiation Hardening
No
REACH SVHC
No SVHC
RoHS Status
ROHS3 Compliant
Lead Free
Lead Free
SN74HC373PWR Overview
In the 20-TSSOP (0.173, 4.40mm Width) package, it can be found as an embedded module. A package of Cut Tape (CT) has been used. It uses the output configuration Tri-State. There is a logic type of D-Type Transparent Latch for this electrical device. Mounting this electronic component follows the Surface Mount method. The voltage supply is 2V~6V. A temperature of -40°C~85°C is set as the operating temperature. It is a type of FPGA belonging to the 74HC series. It is designed with 8 bits. This device has 20 terminations. It belongs to 74HC373 family. In order to operate it, the supply voltage must be 5V. The device is equipped with 20 pins. There is a device in this electronic family called HC/UH. The pin configuration of the device is 20. Surface Mount is the method used for mounting this electronic part. In this device, there is a total of 2 ports available for use. There is a subcategory of FF/Latches for this part. 6V is the maximum voltage (Vsup) that can be supplied. There are 2/6V power supplies required for this machine to operate. (Vsup) should be greater than 2V. Input Lines consist of electronic circuits, and there are 3. As a result of its reliable performance, it is well suited for TR. With 7.8mA, maximum design flexibility is ensured. Optimal efficiency requires 5V as the supply voltage. As far as external factors are concerned, it consumes 8μA of quiescent current without getting affected by them. It achieves superior flexibility by using 8 circuits.
SN74HC373PWR Features
20-TSSOP (0.173, 4.40mm Width) package
74HC series
8 Bits
74HC373 family
20 pin count
20 pins
2/6V power supplies
SN74HC373PWR Applications
There are a lot of Texas Instruments SN74HC373PWR Latches applications.
- Automotive ADAS
- Synchronous frequency dividers
- Parallel data storage
- Counters
- Up-Down Johnson
- Stacked or Push-Down Registers
- Multi-line decoders
- Sample and hold register
- Instrumentation
- A/D and D/A conversion
- ImagePart NumberManufacturerPackage / CaseNumber of PinsLogic FunctionPropagation DelaySupply VoltageQuiescent CurrentRoHS StatusMountView Compare
SN74HC373PWR
NA20-TSSOP (0.173, 4.40mm Width)
20
D-Type, Latch
43 ns
5 V
8 μA
ROHS3 Compliant
Surface Mount
74HCT573PW,118Nexperia USA Inc.20-TSSOP (0.173, 4.40mm Width)
20
D-Type, Latch
53 ns
5 V
8 μA
ROHS3 Compliant
Surface Mount
SN74HC373PWR
VS
74HCT573PW,118
MM74HC374MTCXON Semiconductor20-TSSOP (0.173, 4.40mm Width)
20
D-Type, Flip-Flop
40 ns
4.5 V
8 μA
ROHS3 Compliant
Surface Mount
SN74HC373PWR
VS
MM74HC374MTCX
- SN74HC374APWRNA
20-TSSOP (0.173, 4.40mm Width)
20
-
31 ns
-
8 μA
ROHS3 Compliant
Surface Mount
SN74HC373PWR
VS
SN74HC374APWR
- SN74HC573AQPWRG4Q1NA
20-TSSOP (0.173, 4.40mm Width)
20
D-Type, Latch
34 ns
5 V
-
ROHS3 Compliant
Surface Mount
SN74HC373PWR
VS
SN74HC573AQPWRG4Q1
Aztec Electronics's Payment Terms
Aztec Electronics offers many types of payment options, and support in multiple currencies such as GBP, US dollars, RMB, etc. As relationships are built, payment plans can be established so that payments can be made on a predetermined time frame after receipt of the invoice.
T/T IN ADVANCE (Pay at time of order placement via wire transfer)
How to Ship Electronic Components?
We take great care when shipping electronics overseas. Both the U.S. and U.K. governments have imposed restrictions on air transport of electronics, according to the International Air Transport Association.
1. Understand the shipping rules of the destination country
Different countries have different regulations for shipping electronic equipment, check for certain certifications, and read the destination country's guidelines before shipping to prevent delays or confiscation of goods by customs.
2. Choose a reliable express logistics provider
From providing pick-up service to checking the status with real-time order number, conveniently track packages. At present, the logistics providers we cooperate with more include DHL, UPS, Fedex, TXT.
Of course, if you have a long-term cooperative freight forwarder or your own company's logistics account, you can pick up the goods directly from our warehouse
3. How much does it cost to ship the electronic components?
The shipping cost of electronic products depends on the size and weight of the package and the shipping distance. You can first ask us about the size/weight of the products we sell to estimate the shipping cost.
4. How long does it take to ship the electronic components?
If electronic component in stock, it is usually shipped before 5 o'clock on the same day, and it usually takes 5-10 working days to complete it by international express.
If it is a scheduled component, it needs to wait for the arrival of the parts, and then it will be inspected before delivery. If there are special circumstances, the sales staff will confirm with you. Weekends and holidays will also affect the delivery time of electronic products.
1. We provide 365 days warranty for all electronic components.
2. If you need a test report, please let us know. We have a long-term cooperative testing laboratory. If you have familiar testing laboratory, we can also ship to your designated laboratory for testing.
3. Where does Aztec Electronics mainly purchase electronic components from?
Distributors, free market, 48 global large-scale OEM factories in close contact with us (Great Price advantage, 100% original)
2.Are the Texas Instruments Incorporated (TI)'s SN74HC373PWR price and stock displayed on the website accurate?
Aztec Electronics inventory fluctuates greatly and cannot be updated in time, it is recommended to confirm the order with Aztec Electronics salesperson or online customer service before payment.
You Also Ask
- How to test electronic components and quality inspections?
- How to transport your electronic components safely?
Need Any Service, please feel free contact us.
After the electronic components have passed the quality inspection of Aztec Electronics, there are generally the following five packaging forms for electronic components: Tape, Tube, Tray, Bulk and Ammo.
Tape/Reel | Tube | Tray | Bulk | Ammo |
Weave bulk chips into tapes and pack them into reels through SMD components packaging Tape Machine. Reel is the most commonly used. | When packaging, arrange the components in the same direction and put them into plastic tubes one at a time. | Choose tray package with the same specifications as the original manufacturer, put the components into the tray and use the strapping machine. | Bulk packaging means that the SMD components are freely packaged in a formed plastic box or bag. | Adhesive tape cut continuously in predetermined quantities. The cut strips are placed in boxes for safekeeping. |
Choose electronic components that are vacuum-sealed against water, dust, moisture, oxidation, corrosion, and even UV or RF pollution.
How to pack electronic components in cartons?
1. Choose the right box for your electronic components2. Use anti-static bubble film protect electronic component
3. Put it into the box, no buffer dead corner, 360-degree package.
4. Labeled as fragile to ensure that the courier knows what needs to be done with the package.
Texas Instruments Incorporated (TI) was founded in 1930 and is headquartered in Dallas, Texas, USA. Haviv Ilan is the President and CEO. They design, manufacture, test and sell analog and embedded semiconductors. Industrial and automotive markets are the best markets for their products .
The company focuses on amplifiers, audio, clock and timing, data converters, die and wafer services, DLP® products, interfaces, isolation devices, logic, microcontrollers (MCUs) and processors, motor drivers, power management, radio frequency & Microwaves, Sensors, Switches & Multiplexers, Wireless Connectivity.
Their values: Trustworthy, Inclusive, Innovative, Competitive, Results-oriented
Acquisition history：
In October 1999, TI acquired power Trends
In 2000, TI acquired Burr Brown (BB) at approximately $7.6 billion.
In September 2011, TI acquired National semiconductor(NS.NSC) for US$6.5 billion.
In 2021, TI acquired an operational 300mm fabrication plant located in Lehi, Utah from Micron for $900 million.
Main application fields:
Automotive, Communications Equipment, Enterprise Systems, Industrial Applications, Aerospace and Defense, Appliances, Building Automation, Factory Automation and Control, Grid Infrastructure, Industrial Transportation (non-automotive and non-light truck), Lighting, Medical, Motor Drives, Power Delivery, Pro Audio, Video & Signage, Retail Automation & Payments, Test & Measurement, Personal Electronics.
