Nexperia USA Inc. 74HC573DB,112
74HC573DB,112
Nexperia USA Inc. 74HC573DB,112 information
Type
Parameter
Factory Lead Time
13 Weeks
Contact Plating
Gold
Mount
Surface Mount
Mounting Type
Surface Mount
Package / Case
20-SSOP (0.209, 5.30mm Width)
Number of Pins
20
Supplier Device Package
20-SSOP
Operating Temperature
-40°C~125°C
Packaging
Tube
Series
74HC
Part Status
Active
Moisture Sensitivity Level (MSL)
1 (Unlimited)
Max Operating Temperature
125°C
Min Operating Temperature
-40°C
Voltage - Supply
2V~6V
Base Part Number
74HC573
Output Type
Tri-State
Operating Supply Voltage
5V
Number of Elements
1
Circuit
8:8
Polarity
Non-Inverting
Number of Circuits
8
Max Supply Voltage
6V
Min Supply Voltage
2V
Number of Bits
8
Propagation Delay
225 ns
Quiescent Current
8μA
Turn On Delay Time
14 ns
Logic Function
D-Type, Latch
Current - Output High, Low
7.8mA 7.8mA
Logic Type
D-Type Transparent Latch
High Level Output Current
-7.8mA
Low Level Output Current
7.8mA
Number of Input Lines
10
Independent Circuits
1
Number of Output Lines
8
Delay Time - Propagation
14ns
Radiation Hardening
No
RoHS Status
ROHS3 Compliant
Lead Free
Lead Free
- Datasheets :
- PCN Design/Specification :
- PCN Assembly/Origin :
- PCN Packaging :
- RohsStatement :
74HC573DB,112 Overview
It is embedded in the 20-SSOP (0.209, 5.30mm Width) package. It is packaged in the way of Tube. It uses Tri-State as the output. There is a logic type of D-Type Transparent Latch associated with this electrical device. Surface Mount is used to mount this electronic part. With a supply voltage of 2V~6V, it operates. During operation, the temperature is set at -40°C~125°C. 74HC is the series number of this FPGA. The design of this electronic part contains 8 bits. The family it belongs to is 74HC573. The pin configuration of the device is 20. Electronic parts are mounted using the Surface Mount method. It consists of 10 input lines from which an electronic circuit can be built. High efficiency requires a voltage supply of 5V. 8 output lines provide binary equivalents of input lines. The current consumed by the device is 8μA volts in quiescent mode, which cannot be affected by external factors. A total of 1 elements make up this object. 8 circuits enable it to achieve high performance. The low level output current is set to 7.8mA. In the high level output current, the value is set to -7.8mA. Lower than 125°C is the recommended operating temperature. The operating temperature should be higher than -40°C. The supply voltage is limited to 6V. In order for the machine to operate, the supply voltage must be 2V.
74HC573DB,112 Features
20-SSOP (0.209, 5.30mm Width) package
74HC series
8 Bits
74HC573 family
20 pins
1 elements
74HC573DB,112 Applications
There are a lot of Nexperia USA Inc. 74HC573DB,112 Latches applications.
- Shift left with parallel loading
- Automotive Body Electronics
- Motor Drives
- Serial Output Register
- Hammer
- Pattern generators
- Serial Output Data Queuing
- Display
- Parallel-to-Serial Data Conversion
- Ring counter
- ImagePart NumberManufacturerPackage / CaseNumber of PinsLogic FunctionNumber of ElementsPropagation DelayMin Supply VoltageMax Supply VoltageQuiescent CurrentView Compare
74HC573DB,112
Nexperia USA Inc.20-SSOP (0.209, 5.30mm Width)
20
D-Type, Latch
1
225 ns
2 V
6 V
8 μA
- 74HC574DB,112Nexperia USA Inc.
20-SSOP (0.209, 5.30mm Width)
20
-
1
225 ns
-
-
-
74HC573DB,112
VS
74HC574DB,112
- 74HC574DB,118Nexperia USA Inc.
20-SSOP (0.209, 5.30mm Width)
20
D-Type, Flip-Flop
1
225 ns
-
-
8 μA
74HC573DB,112
VS
74HC574DB,118
- 74HC374DB,112Nexperia USA Inc.
20-SSOP (0.209, 5.30mm Width)
20
D-Type, Flip-Flop
1
250 ns
-
-
8 μA
74HC573DB,112
VS
74HC374DB,112
SN74HC373DBRNA20-SSOP (0.209, 5.30mm Width)
20
D-Type, Latch
-
285 ns
-
-
8 μA
74HC573DB,112
VS
SN74HC373DBR
Aztec Electronics's Payment Terms
Aztec Electronics offers many types of payment options, and support in multiple currencies such as GBP, US dollars, RMB, etc. As relationships are built, payment plans can be established so that payments can be made on a predetermined time frame after receipt of the invoice.
T/T IN ADVANCE (Pay at time of order placement via wire transfer)
How to Ship Electronic Components?
We take great care when shipping electronics overseas. Both the U.S. and U.K. governments have imposed restrictions on air transport of electronics, according to the International Air Transport Association.
1. Understand the shipping rules of the destination country
Different countries have different regulations for shipping electronic equipment, check for certain certifications, and read the destination country's guidelines before shipping to prevent delays or confiscation of goods by customs.
2. Choose a reliable express logistics provider
From providing pick-up service to checking the status with real-time order number, conveniently track packages. At present, the logistics providers we cooperate with more include DHL, UPS, Fedex, TXT.
Of course, if you have a long-term cooperative freight forwarder or your own company's logistics account, you can pick up the goods directly from our warehouse
3. How much does it cost to ship the electronic components?
The shipping cost of electronic products depends on the size and weight of the package and the shipping distance. You can first ask us about the size/weight of the products we sell to estimate the shipping cost.
4. How long does it take to ship the electronic components?
If electronic component in stock, it is usually shipped before 5 o'clock on the same day, and it usually takes 5-10 working days to complete it by international express.
If it is a scheduled component, it needs to wait for the arrival of the parts, and then it will be inspected before delivery. If there are special circumstances, the sales staff will confirm with you. Weekends and holidays will also affect the delivery time of electronic products.
1. We provide 365 days warranty for all electronic components.
2. If you need a test report, please let us know. We have a long-term cooperative testing laboratory. If you have familiar testing laboratory, we can also ship to your designated laboratory for testing.
3. Where does Aztec Electronics mainly purchase electronic components from?
Distributors, free market, 48 global large-scale OEM factories in close contact with us (Great Price advantage, 100% original)
2.Are the Nexperia's 74HC573DB,112 price and stock displayed on the website accurate?
Aztec Electronics inventory fluctuates greatly and cannot be updated in time, it is recommended to confirm the order with Aztec Electronics salesperson or online customer service before payment.
You Also Ask
- How to test electronic components and quality inspections?
- How to transport your electronic components safely?
Need Any Service, please feel free contact us.
After the electronic components have passed the quality inspection of Aztec Electronics, there are generally the following five packaging forms for electronic components: Tape, Tube, Tray, Bulk and Ammo.
Tape/Reel | Tube | Tray | Bulk | Ammo |
Weave bulk chips into tapes and pack them into reels through SMD components packaging Tape Machine. Reel is the most commonly used. | When packaging, arrange the components in the same direction and put them into plastic tubes one at a time. | Choose tray package with the same specifications as the original manufacturer, put the components into the tray and use the strapping machine. | Bulk packaging means that the SMD components are freely packaged in a formed plastic box or bag. | Adhesive tape cut continuously in predetermined quantities. The cut strips are placed in boxes for safekeeping. |
Choose electronic components that are vacuum-sealed against water, dust, moisture, oxidation, corrosion, and even UV or RF pollution.
How to pack electronic components in cartons?
1. Choose the right box for your electronic components2. Use anti-static bubble film protect electronic component
3. Put it into the box, no buffer dead corner, 360-degree package.
4. Labeled as fragile to ensure that the courier knows what needs to be done with the package.
