Texas Instruments PCM3001E/2K
PCM3001E/2K
Texas Instruments PCM3001E/2K information
Type
Parameter
Factory Lead Time
6 Weeks
Lifecycle Status
ACTIVE (Last Updated: 4 days ago)
Mounting Type
Surface Mount
Package / Case
28-SSOP (0.209, 5.30mm Width)
Surface Mount
YES
Number of Pins
28
Weight
285.791543mg
Operating Temperature
-25°C~85°C
Packaging
Tape & Reel (TR)
JESD-609 Code
e4
Pbfree Code
yes
Part Status
Active
Moisture Sensitivity Level (MSL)
1 (Unlimited)
Number of Terminations
28
Type
Stereo Audio
Terminal Finish
Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory
Other Consumer ICs
Technology
CMOS
Terminal Position
DUAL
Terminal Form
GULL WING
Peak Reflow Temperature (Cel)
260
Number of Functions
1
Terminal Pitch
0.65mm
Base Part Number
PCM3001
Pin Count
28
Operating Supply Voltage
5V
Power Supplies
5V
Max Supply Voltage
5.5V
Min Supply Voltage
4.5V
Nominal Supply Current
50mA
Number of Bits
18
Data Interface
Serial
Sampling Rate
48 ksps
Voltage - Supply, Analog
4.5V~5.5V
Voltage - Supply, Digital
4.5V~5.5V
Power Consumption
160mW
Number of A/D Converters
1
Signal to Noise Ratio (SNR)
94 dB
Number of ADC Channels
2
Resolution (Bits)
18 b
Sigma Delta
Yes
Number of ADCs / DACs
2 / 2
Dynamic Range, ADCs / DACs (db) Typ
94 / 97
S/N Ratio, ADCs / DACs (db) Typ
94 / 98
Height
2mm
Length
10.2mm
Width
5.3mm
Thickness
1.95mm
Radiation Hardening
No
RoHS Status
ROHS3 Compliant
Lead Free
Lead Free
- PCN Design/Specification :
- PCN Packaging :
- Datasheets :
PCM3001E/2K Overview
As a space saver, it comes in the 28-SSOP (0.209, 5.30mm Width) package. We have adopted the packaging method of Tape & Reel (TR). Due to the fact that this part is of the type Stereo Audio, it is capable of delivering high-efficiency performance in a wide range of applications. A mounting type of Surface Mount is used for this device. When the operating performance is set to -25°C~85°C, it can operate normally. The unit is integrated with 2 / 2 ADCs / DACs. The analog circuit is powered by 4.5V~5.5V. 4.5V~5.5V is the supply voltage for the digital circuit. 28 terminations prevent signals from reflecting off transmission lines. Essentially, it is an electronic device with 28 pins. 28 pins are connected to it. Its base part number PCM3001 can be used to find more parts like it. Voltage should not exceed 5.5V. There are 1 A/D converters used to convert the analog signals into digital signals. Subcategory Other Consumer ICs describes this electronic part. Supply voltage should be maintained at 4.5V. A 5V power supply is needed to operate it. Operating voltages as low as 5V can be used. An information storage system with 18 bits is provided. There is normally a current of 50mA flowing through the circuit at any given time. As there are 2 channels for ADCs, there is a maximum number of analog values that can be read simultaneously.
PCM3001E/2K Features
Embedded in the 28-SSOP (0.209, 5.30mm Width) package
Operating temperature of -25°C~85°C
2 / 2 ADCs / DACs
1 A/D converters
PCM3001E/2K Applications
There are a lot of Texas Instruments PCM3001E/2K CODECs Interface ICs applications.
- Off-Highway Vehicles (OHV)
- Flight simulators
- Web tensioning
- CNC machining
- Full adders
- Microprocessor
- Backstop gauging
- Stagecraft
- Food & beverage
- Multiplication
Aztec Electronics's Payment Terms
Aztec Electronics offers many types of payment options, and support in multiple currencies such as GBP, US dollars, RMB, etc. As relationships are built, payment plans can be established so that payments can be made on a predetermined time frame after receipt of the invoice.
T/T IN ADVANCE (Pay at time of order placement via wire transfer)
How to Ship Electronic Components?
We take great care when shipping electronics overseas. Both the U.S. and U.K. governments have imposed restrictions on air transport of electronics, according to the International Air Transport Association.
1. Understand the shipping rules of the destination country
Different countries have different regulations for shipping electronic equipment, check for certain certifications, and read the destination country's guidelines before shipping to prevent delays or confiscation of goods by customs.
2. Choose a reliable express logistics provider
From providing pick-up service to checking the status with real-time order number, conveniently track packages. At present, the logistics providers we cooperate with more include DHL, UPS, Fedex, TXT.
Of course, if you have a long-term cooperative freight forwarder or your own company's logistics account, you can pick up the goods directly from our warehouse
3. How much does it cost to ship the electronic components?
The shipping cost of electronic products depends on the size and weight of the package and the shipping distance. You can first ask us about the size/weight of the products we sell to estimate the shipping cost.
4. How long does it take to ship the electronic components?
If electronic component in stock, it is usually shipped before 5 o'clock on the same day, and it usually takes 5-10 working days to complete it by international express.
If it is a scheduled component, it needs to wait for the arrival of the parts, and then it will be inspected before delivery. If there are special circumstances, the sales staff will confirm with you. Weekends and holidays will also affect the delivery time of electronic products.
1. We provide 365 days warranty for all electronic components.
2. If you need a test report, please let us know. We have a long-term cooperative testing laboratory. If you have familiar testing laboratory, we can also ship to your designated laboratory for testing.
3. Where does Aztec Electronics mainly purchase electronic components from?
Distributors, free market, 48 global large-scale OEM factories in close contact with us (Great Price advantage, 100% original)
2.Are the Texas Instruments Incorporated (TI)'s PCM3001E/2K price and stock displayed on the website accurate?
Aztec Electronics inventory fluctuates greatly and cannot be updated in time, it is recommended to confirm the order with Aztec Electronics salesperson or online customer service before payment.
You Also Ask
- How to test electronic components and quality inspections?
- How to transport your electronic components safely?
Need Any Service, please feel free contact us.
After the electronic components have passed the quality inspection of Aztec Electronics, there are generally the following five packaging forms for electronic components: Tape, Tube, Tray, Bulk and Ammo.
Tape/Reel | Tube | Tray | Bulk | Ammo |
Weave bulk chips into tapes and pack them into reels through SMD components packaging Tape Machine. Reel is the most commonly used. | When packaging, arrange the components in the same direction and put them into plastic tubes one at a time. | Choose tray package with the same specifications as the original manufacturer, put the components into the tray and use the strapping machine. | Bulk packaging means that the SMD components are freely packaged in a formed plastic box or bag. | Adhesive tape cut continuously in predetermined quantities. The cut strips are placed in boxes for safekeeping. |
Choose electronic components that are vacuum-sealed against water, dust, moisture, oxidation, corrosion, and even UV or RF pollution.
How to pack electronic components in cartons?
1. Choose the right box for your electronic components2. Use anti-static bubble film protect electronic component
3. Put it into the box, no buffer dead corner, 360-degree package.
4. Labeled as fragile to ensure that the courier knows what needs to be done with the package.
Texas Instruments Incorporated (TI) was founded in 1930 and is headquartered in Dallas, Texas, USA. Haviv Ilan is the President and CEO. They design, manufacture, test and sell analog and embedded semiconductors. Industrial and automotive markets are the best markets for their products .
The company focuses on amplifiers, audio, clock and timing, data converters, die and wafer services, DLP® products, interfaces, isolation devices, logic, microcontrollers (MCUs) and processors, motor drivers, power management, radio frequency & Microwaves, Sensors, Switches & Multiplexers, Wireless Connectivity.
Their values: Trustworthy, Inclusive, Innovative, Competitive, Results-oriented
Acquisition history：
In October 1999, TI acquired power Trends
In 2000, TI acquired Burr Brown (BB) at approximately $7.6 billion.
In September 2011, TI acquired National semiconductor(NS.NSC) for US$6.5 billion.
In 2021, TI acquired an operational 300mm fabrication plant located in Lehi, Utah from Micron for $900 million.
Main application fields:
Automotive, Communications Equipment, Enterprise Systems, Industrial Applications, Aerospace and Defense, Appliances, Building Automation, Factory Automation and Control, Grid Infrastructure, Industrial Transportation (non-automotive and non-light truck), Lighting, Medical, Motor Drives, Power Delivery, Pro Audio, Video & Signage, Retail Automation & Payments, Test & Measurement, Personal Electronics.
