Microchip Technology TC9400CPD
TC9400CPD
Please send RFQ , we will respond immediately.
Microchip Technology TC9400CPD information
Type
Parameter
Factory Lead Time
5 Weeks
Mount
Through Hole
Mounting Type
Through Hole
Package / Case
14-DIP (0.300, 7.62mm)
Number of Pins
14
Packaging
Tube
Published
2002
JESD-609 Code
e3
Pbfree Code
yes
Part Status
Active
Moisture Sensitivity Level (MSL)
1 (Unlimited)
Number of Terminations
14
ECCN Code
EAR99
Type
Volt to Frequency and Frequency to Volt
Terminal Finish
Matte Tin (Sn)
Max Operating Temperature
70°C
Min Operating Temperature
0°C
Technology
CMOS
Terminal Position
DUAL
Number of Functions
1
Supply Voltage
5V
Terminal Pitch
2.54mm
Frequency
100kHz
Base Part Number
TC9400
Pin Count
14
Output Voltage
18V
Max Output Current
10mA
Temperature Grade
COMMERCIAL
Number of Channels
1
Interface
Analog
Max Supply Voltage
15V
Min Supply Voltage
8V
Nominal Supply Current
1.5mA
Power Dissipation
730mW
Max Output Voltage
6.5V
Bandwidth
100 kHz
Resolution
1.625 B
Max Dual Supply Voltage
7.5V
Power Consumption
27mW
Linearity
±0.05%
Min Dual Supply Voltage
4V
Dual Supply Voltage
5V
Negative Supply Voltage-Nom
-5V
Positive Input Voltage-Max
5V
Negative Input Voltage-Max
-2V
Full Scale
±40ppm/°C
Height
4.95mm
Length
19.69mm
Width
7.11mm
Radiation Hardening
No
REACH SVHC
No SVHC
RoHS Status
ROHS3 Compliant
Lead Free
Lead Free
- Datasheets :
- PCN Packaging :
- ConflictMineralStatement :
microchip-dsc1123ci5400000-conflictmineralstatement-4089.pdf
TC9400CPD Overview
It is embedded in the 14-DIP (0.300, 7.62mm) package. Located in Through Hole, this electronic component is mounted. It is packaged in the way of Tube. Currently, an electrical device of type Volt to Frequency and Frequency to Volt is being used. As an alternative to 14 terminations, there are devices that match the characteristic impedance of transmission lines. The device is equipped with a 14 pin count. An electrical supply of voltage 5V supplies power to the device. It is possible to identify related parts based on the base part number. 14 pins are pronged contacts found in computer or other communication devices, as part of a signal interface. For the purpose of ensuring the reliability of the device, it operates at a minimum operating temperature of 0°C. As a measure to ensure its reliability, it operates at a maximum operating temperature of 70°C. Mounted in the direction of Through Hole. The supply voltage (Vsup) should be greater than 8V if it is suitable for use. There is a maximal supply voltage (Vsup) reaching 15V. The frequency of operation is 100kHz. It is powered by a dual supply voltage of 5V. Input type -2V is the maximum negative input type for this electronic part. It supports the output voltage of 18V. This electrical device has a bandwidth of 100 kHz.
TC9400CPD Features
14-DIP (0.300, 7.62mm) package
14 terminations
14 pin count
14 pins
A dual supply voltage of 5V
TC9400CPD Applications
There are a lot of Microchip Technology TC9400CPD V/F & F/V Converters applications.
- Analog Data Transmission and Recording
- Horn Control
- Automotive Door L ock Control
- Integrating a/d converter
- FM Demodulation
- Touch or Sound Switches
- Motor Control
- Frequency Meters/Tachometer
- Low-Cost Analog-to-Digital Conversion
- Serial frequency output
- ImagePart NumberManufacturerPackage / CaseNumber of PinsInterfaceMin Dual Supply VoltageMin Supply VoltageSupply VoltageMax Dual Supply VoltageMax Supply VoltageView Compare
TC9400CPD
Microchip Technology14-DIP (0.300, 7.62mm)
14
Analog
4 V
8 V
5 V
7.5 V
15 V
AD8402ANZ10Analog Devices Inc.14-DIP (0.300, 7.62mm)
14
SPI
-
-
3 V
-
-
TC9400CPD
VS
AD8402ANZ10
ADC0834CCNNA14-DIP (0.300, 7.62mm)
14
Serial
-
4.5 V
5 V
-
6.3 V
TC9400CPD
VS
ADC0834CCN
MX7524JN+Maxim Integrated16-DIP (0.300, 7.62mm)
16
-
-
5 V
5 V
-
15 V
TC9400CPD
VS
MX7524JN+
DS1868-50+Maxim IntegratedDIP
14
Serial
-
2.7 V
5 V
-
5.5 V
TC9400CPD
VS
DS1868-50+
Aztec Electronics's Payment Terms
Aztec Electronics offers many types of payment options, and support in multiple currencies such as GBP, US dollars, RMB, etc. As relationships are built, payment plans can be established so that payments can be made on a predetermined time frame after receipt of the invoice.
T/T IN ADVANCE (Pay at time of order placement via wire transfer)
How to Ship Electronic Components?
We take great care when shipping electronics overseas. Both the U.S. and U.K. governments have imposed restrictions on air transport of electronics, according to the International Air Transport Association.
1. Understand the shipping rules of the destination country
Different countries have different regulations for shipping electronic equipment, check for certain certifications, and read the destination country's guidelines before shipping to prevent delays or confiscation of goods by customs.
2. Choose a reliable express logistics provider
From providing pick-up service to checking the status with real-time order number, conveniently track packages. At present, the logistics providers we cooperate with more include DHL, UPS, Fedex, TXT.
Of course, if you have a long-term cooperative freight forwarder or your own company's logistics account, you can pick up the goods directly from our warehouse
3. How much does it cost to ship the electronic components?
The shipping cost of electronic products depends on the size and weight of the package and the shipping distance. You can first ask us about the size/weight of the products we sell to estimate the shipping cost.
4. How long does it take to ship the electronic components?
If electronic component in stock, it is usually shipped before 5 o'clock on the same day, and it usually takes 5-10 working days to complete it by international express.
If it is a scheduled component, it needs to wait for the arrival of the parts, and then it will be inspected before delivery. If there are special circumstances, the sales staff will confirm with you. Weekends and holidays will also affect the delivery time of electronic products.
1. We provide 365 days warranty for all electronic components.
2. If you need a test report, please let us know. We have a long-term cooperative testing laboratory. If you have familiar testing laboratory, we can also ship to your designated laboratory for testing.
3. Where does Aztec Electronics mainly purchase electronic components from?
Distributors, free market, 48 global large-scale OEM factories in close contact with us (Great Price advantage, 100% original)
2.Are the Microchip Technology's TC9400CPD price and stock displayed on the website accurate?
Aztec Electronics inventory fluctuates greatly and cannot be updated in time, it is recommended to confirm the order with Aztec Electronics salesperson or online customer service before payment.
You Also Ask
- How to test electronic components and quality inspections?
- How to transport your electronic components safely?
Need Any Service, please feel free contact us.
After the electronic components have passed the quality inspection of Aztec Electronics, there are generally the following five packaging forms for electronic components: Tape, Tube, Tray, Bulk and Ammo.
Tape/Reel | Tube | Tray | Bulk | Ammo |
Weave bulk chips into tapes and pack them into reels through SMD components packaging Tape Machine. Reel is the most commonly used. | When packaging, arrange the components in the same direction and put them into plastic tubes one at a time. | Choose tray package with the same specifications as the original manufacturer, put the components into the tray and use the strapping machine. | Bulk packaging means that the SMD components are freely packaged in a formed plastic box or bag. | Adhesive tape cut continuously in predetermined quantities. The cut strips are placed in boxes for safekeeping. |
Choose electronic components that are vacuum-sealed against water, dust, moisture, oxidation, corrosion, and even UV or RF pollution.
How to pack electronic components in cartons?
1. Choose the right box for your electronic components2. Use anti-static bubble film protect electronic component
3. Put it into the box, no buffer dead corner, 360-degree package.
4. Labeled as fragile to ensure that the courier knows what needs to be done with the package.
