Analog Devices Inc. AD7740YRMZ-REEL7
AD7740YRMZ-REEL7
Please send RFQ , we will respond immediately.
Analog Devices Inc. AD7740YRMZ-REEL7 information
Type
Parameter
Factory Lead Time
16 Weeks
Lifecycle Status
PRODUCTION (Last Updated: 4 weeks ago)
Contact Plating
Tin
Mount
Surface Mount
Mounting Type
Surface Mount
Package / Case
8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Number of Pins
8
Weight
139.989945mg
Packaging
Tape & Reel (TR)
JESD-609 Code
e3
Pbfree Code
no
Part Status
Active
Moisture Sensitivity Level (MSL)
1 (Unlimited)
Number of Terminations
8
ECCN Code
EAR99
Type
Voltage to Frequency
Max Operating Temperature
105°C
Min Operating Temperature
-40°C
Additional Feature
CAN ALSO OPERATE FROM 4.75V TO 5.25V SUPPLY
Technology
CMOS
Terminal Position
DUAL
Terminal Form
GULL WING
Peak Reflow Temperature (Cel)
260
Number of Functions
1
Supply Voltage
3.3V
Terminal Pitch
0.65mm
Frequency
1MHz
Reflow Temperature-Max (s)
30
Base Part Number
AD7740
Pin Count
8
Temperature Grade
INDUSTRIAL
Max Supply Voltage
5.25V
Min Supply Voltage
3V
Operating Supply Current
1.5mA
Nominal Supply Current
1.5mA
Accuracy
1 %
Max Input Voltage
2.5V
Supply Type
Single
Reference Voltage
2.5V
Linearity
±0.012%
Positive Input Voltage-Max
3.1V
Full Scale
±50ppm/°C
Height Seated (Max)
1.1mm
Length
3mm
Width
3mm
Radiation Hardening
No
RoHS Status
ROHS3 Compliant
Lead Free
Contains Lead
- Datasheets :
- PCN Assembly/Origin :
- ConflictMineralStatement :
analogdeviceslineartechnology-lt5400bhms8e8trpbf-conflictmineralstatement-8771.pdf
AD7740YRMZ-REEL7 Overview
As part of the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package, it is embedded. Electronic part Surface Mount is mounted in this way. Tape & Reel (TR) is in the way of the package. An electrical device of this type is designated as Voltage to Frequency. It is possible to terminate a transmission line with a 8 termination, which is an end device that matches the line's characteristic impedance. It is equipped with 8 pin count. A supply voltage of 3.3V powers it. It is possible to determine the related parts of a base part number. When a computer or other communication device is attached to a signal interface, there are 8 pins, which are pronged contacts. To ensure its reliability, it must operate at a minimum operating temperature of -40°C. To ensure the reliability of the device, the maximum operating temperature is 105°C. A Surface Mount mounting is used. There should be a higher supply voltage (Vsup) than 3V. The maximal supply voltage (Vsup) reaches 5.25V. 1MHz is the frequency at which it operates. The supply current of 1.5mA needs to be provided to fully play its function. The maximal input type of this electronic part is 2.5V. The type of supply for this electronic component is Single. 2.5V is the reference voltage for this electrical device. There is also a characteristic CAN ALSO OPERATE FROM 4.75V TO 5.25V SUPPLY associated with it.
AD7740YRMZ-REEL7 Features
8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package
8 terminations
8 pin count
8 pins
AD7740YRMZ-REEL7 Applications
There are a lot of Analog Devices Inc. AD7740YRMZ-REEL7 V/F & F/V Converters applications.
- Cruise Control
- Phase Locked Loops
- Hand-Held Tachometers
- Clutch Control
- Over-and Under-Speed Sensing
- Frequency to Voltage Conversions
- lsolation of High Common-Mode Voltages
- FM Demodulation
- Fm analog signal mod/d emod
- Breaker Point Dwell Meters
- ImagePart NumberManufacturerPackage / CaseNumber of PinsMin Supply VoltageSupply VoltageMax Supply VoltageTechnologyWidthLengthView Compare
AD7740YRMZ-REEL7
Analog Devices Inc.8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
8
3 V
3.3 V
5.25 V
CMOS
3 mm
3 mm
ADC082S051CIMM/NOPBNA8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
-
2.7 V
3 V
5.25 V
CMOS
3 mm
3 mm
AD7740YRMZ-REEL7
VS
ADC082S051CIMM/NOPB
- AD7740KRMZ-REEL7Analog Devices Inc.
8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
8
3 V
3.3 V
5.25 V
CMOS
3 mm
3 mm
AD7740YRMZ-REEL7
VS
AD7740KRMZ-REEL7
ADC082S021CIMM/NOPBNA8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
-
2.7 V
3 V
5.25 V
CMOS
3 mm
3 mm
AD7740YRMZ-REEL7
VS
ADC082S021CIMM/NOPB
- ADC082S101CIMM/NOPBNA
8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
-
2.7 V
3 V
5.25 V
CMOS
3 mm
3 mm
AD7740YRMZ-REEL7
VS
ADC082S101CIMM/NOPB
Aztec Electronics's Payment Terms
Aztec Electronics offers many types of payment options, and support in multiple currencies such as GBP, US dollars, RMB, etc. As relationships are built, payment plans can be established so that payments can be made on a predetermined time frame after receipt of the invoice.
T/T IN ADVANCE (Pay at time of order placement via wire transfer)
How to Ship Electronic Components?
We take great care when shipping electronics overseas. Both the U.S. and U.K. governments have imposed restrictions on air transport of electronics, according to the International Air Transport Association.
1. Understand the shipping rules of the destination country
Different countries have different regulations for shipping electronic equipment, check for certain certifications, and read the destination country's guidelines before shipping to prevent delays or confiscation of goods by customs.
2. Choose a reliable express logistics provider
From providing pick-up service to checking the status with real-time order number, conveniently track packages. At present, the logistics providers we cooperate with more include DHL, UPS, Fedex, TXT.
Of course, if you have a long-term cooperative freight forwarder or your own company's logistics account, you can pick up the goods directly from our warehouse
3. How much does it cost to ship the electronic components?
The shipping cost of electronic products depends on the size and weight of the package and the shipping distance. You can first ask us about the size/weight of the products we sell to estimate the shipping cost.
4. How long does it take to ship the electronic components?
If electronic component in stock, it is usually shipped before 5 o'clock on the same day, and it usually takes 5-10 working days to complete it by international express.
If it is a scheduled component, it needs to wait for the arrival of the parts, and then it will be inspected before delivery. If there are special circumstances, the sales staff will confirm with you. Weekends and holidays will also affect the delivery time of electronic products.
1. We provide 365 days warranty for all electronic components.
2. If you need a test report, please let us know. We have a long-term cooperative testing laboratory. If you have familiar testing laboratory, we can also ship to your designated laboratory for testing.
3. Where does Aztec Electronics mainly purchase electronic components from?
Distributors, free market, 48 global large-scale OEM factories in close contact with us (Great Price advantage, 100% original)
2.Are the ND-1's AD7740YRMZ-REEL7 price and stock displayed on the website accurate?
Aztec Electronics inventory fluctuates greatly and cannot be updated in time, it is recommended to confirm the order with Aztec Electronics salesperson or online customer service before payment.
You Also Ask
- How to test electronic components and quality inspections?
- How to transport your electronic components safely?
Need Any Service, please feel free contact us.
After the electronic components have passed the quality inspection of Aztec Electronics, there are generally the following five packaging forms for electronic components: Tape, Tube, Tray, Bulk and Ammo.
Tape/Reel | Tube | Tray | Bulk | Ammo |
Weave bulk chips into tapes and pack them into reels through SMD components packaging Tape Machine. Reel is the most commonly used. | When packaging, arrange the components in the same direction and put them into plastic tubes one at a time. | Choose tray package with the same specifications as the original manufacturer, put the components into the tray and use the strapping machine. | Bulk packaging means that the SMD components are freely packaged in a formed plastic box or bag. | Adhesive tape cut continuously in predetermined quantities. The cut strips are placed in boxes for safekeeping. |
Choose electronic components that are vacuum-sealed against water, dust, moisture, oxidation, corrosion, and even UV or RF pollution.
How to pack electronic components in cartons?
1. Choose the right box for your electronic components2. Use anti-static bubble film protect electronic component
3. Put it into the box, no buffer dead corner, 360-degree package.
4. Labeled as fragile to ensure that the courier knows what needs to be done with the package.
