Maxim Integrated MAX706ESA+T
MAX706ESA+T
Maxim Integrated MAX706ESA+T information
Type
Parameter
Factory Lead Time
6 Weeks
Mount
Surface Mount
Mounting Type
Surface Mount
Package / Case
8-SOIC (0.154, 3.90mm Width)
Number of Pins
8
Operating Temperature
-40°C~85°C TA
Packaging
Tape & Reel (TR)
Published
2005
JESD-609 Code
e3
Pbfree Code
yes
Part Status
Active
Moisture Sensitivity Level (MSL)
1 (Unlimited)
Number of Terminations
8
ECCN Code
EAR99
Type
Simple Reset/Power-On Reset
Terminal Finish
Matte Tin (Sn)
Subcategory
Power Management Circuits
Max Power Dissipation
471mW
Technology
CMOS
Terminal Position
DUAL
Terminal Form
GULL WING
Peak Reflow Temperature (Cel)
260
Number of Functions
1
Supply Voltage
5V
Base Part Number
MAX706
Output
Push-Pull, Totem Pole
Pin Count
8
Power Supplies
5V
Number of Channels
2
Max Supply Voltage
5.5V
Min Supply Voltage
1.2V
Operating Supply Current
500μA
Max Supply Current
500μA
Adjustable Threshold
YES
Watchdog Timer
Yes
Reset
Active Low
Voltage - Threshold
4.4V
Number of Voltages Monitored
1
Reset Timeout
140ms Minimum
Min Reset Threshold Voltage
4.25V
Max Reset Threshold Voltage
4.5V
Undervoltage Threshold
4.25V
Overvoltage Threshold
4.5V
Length
4.9mm
Width
3.9mm
Radiation Hardening
No
RoHS Status
ROHS3 Compliant
Lead Free
Lead Free
- Datasheets :
- Application Notes :
- ConflictMineralStatement :
maximintegrated-ds1075z66n-conflictmineralstatement-7504.pdf
MAX706ESA+T Overview
A total of 8 terminals are used to mount this power management. Packaging is in the form of a Tape & Reel (TR). There are 1 functions included in this PMIC so that you can refer to them. Depending on the power managment ic you are looking at, you can find a total of 2 channels. IC management is packaged as a 8-SOIC (0.154, 3.90mm Width) package. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. Specifies a reflow peak temperature of 260 for the package during reflow. A supply voltage of 5V is used to conduct the PMIC chip. In a 1 supply voltage, the PMIC chip conducts. Surface Mount mounts IC management. It is possible to subcategorize this power ic as a Power Management Circuits chip. In total, it has 8 pins on IC management. There are 8 pins on the power managment ic. IC management can only work with a supply voltage of 1.2V volts. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. The recommended mounting type is Surface Mount. It is recommended that the supervisor be set to this temperature: -40°C~85°C TA. While this power management is operating, it will output Push-Pull, Totem Pole as the output voltage. For this power management, there is an 500μA volt supply current. It is always advisable to use MAX706, the base supervisor number, when searching for similar PMICs from the manufacturer. It requires 5V watts of power to operate this voltage supervisor. A maximum supply temperature of 500μA can be used with this power management.
MAX706ESA+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
500μA operating supply current
MAX706ESA+T Applications
There are a lot of Maxim Integrated MAX706ESA+T Voltage Supervisors applications.
- Refrigeration
- Set top box
- Dash board
- Kitchen appliances
- Battery cars
- Multi-voltage system
- Computer applications
- Military electronics
- Smartphones
- WiFi router
- ImagePart NumberManufacturerPackage / CaseNumber of PinsNumber of Voltages MonitoredResetReset TimeoutOvervoltage ThresholdUndervoltage ThresholdWatchdog TimerMin Supply VoltageSupply VoltageView Compare
MAX706ESA+T
Maxim Integrated8-SOIC (0.154, 3.90mm Width)
8
1
Active Low
140ms Minimum
4.5 V
4.25 V
Yes
1.2 V
5 V
- DS1706ESAMaxim Integrated
8-SOIC (0.154, 3.90mm Width)
8
1
Active Low
130ms Minimum
4.5 V
4.25 V
Yes
1.2 V
5 V
MAX706ESA+T
VS
DS1706ESA
CAT706VI-GT3ON Semiconductor8-SOIC (0.154, 3.90mm Width)
8
1
Active Low
140ms Minimum
4.5 V
4.4 V
Yes
1.2 V
5 V
MAX706ESA+T
VS
CAT706VI-GT3
- MAX692ACSA+TMaxim Integrated
8-SOIC (0.154, 3.90mm Width)
8
1
Active Low
140ms Minimum
4.5 V
4.25 V
Yes
1 V
5 V
MAX706ESA+T
VS
MAX692ACSA+T
- MAX706CSA+TMaxim Integrated
8-SOIC (0.154, 3.90mm Width)
8
1
Active Low
140ms Minimum
4.5 V
4.25 V
Yes
1 V
5 V
MAX706ESA+T
VS
MAX706CSA+T
Aztec Electronics's Payment Terms
Aztec Electronics offers many types of payment options, and support in multiple currencies such as GBP, US dollars, RMB, etc. As relationships are built, payment plans can be established so that payments can be made on a predetermined time frame after receipt of the invoice.
T/T IN ADVANCE (Pay at time of order placement via wire transfer)
How to Ship Electronic Components?
We take great care when shipping electronics overseas. Both the U.S. and U.K. governments have imposed restrictions on air transport of electronics, according to the International Air Transport Association.
1. Understand the shipping rules of the destination country
Different countries have different regulations for shipping electronic equipment, check for certain certifications, and read the destination country's guidelines before shipping to prevent delays or confiscation of goods by customs.
2. Choose a reliable express logistics provider
From providing pick-up service to checking the status with real-time order number, conveniently track packages. At present, the logistics providers we cooperate with more include DHL, UPS, Fedex, TXT.
Of course, if you have a long-term cooperative freight forwarder or your own company's logistics account, you can pick up the goods directly from our warehouse
3. How much does it cost to ship the electronic components?
The shipping cost of electronic products depends on the size and weight of the package and the shipping distance. You can first ask us about the size/weight of the products we sell to estimate the shipping cost.
4. How long does it take to ship the electronic components?
If electronic component in stock, it is usually shipped before 5 o'clock on the same day, and it usually takes 5-10 working days to complete it by international express.
If it is a scheduled component, it needs to wait for the arrival of the parts, and then it will be inspected before delivery. If there are special circumstances, the sales staff will confirm with you. Weekends and holidays will also affect the delivery time of electronic products.
1. We provide 365 days warranty for all electronic components.
2. If you need a test report, please let us know. We have a long-term cooperative testing laboratory. If you have familiar testing laboratory, we can also ship to your designated laboratory for testing.
3. Where does Aztec Electronics mainly purchase electronic components from?
Distributors, free market, 48 global large-scale OEM factories in close contact with us (Great Price advantage, 100% original)
2.Are the ND-2's MAX706ESA+T price and stock displayed on the website accurate?
Aztec Electronics inventory fluctuates greatly and cannot be updated in time, it is recommended to confirm the order with Aztec Electronics salesperson or online customer service before payment.
You Also Ask
- How to test electronic components and quality inspections?
- How to transport your electronic components safely?
Need Any Service, please feel free contact us.
After the electronic components have passed the quality inspection of Aztec Electronics, there are generally the following five packaging forms for electronic components: Tape, Tube, Tray, Bulk and Ammo.
Tape/Reel | Tube | Tray | Bulk | Ammo |
Weave bulk chips into tapes and pack them into reels through SMD components packaging Tape Machine. Reel is the most commonly used. | When packaging, arrange the components in the same direction and put them into plastic tubes one at a time. | Choose tray package with the same specifications as the original manufacturer, put the components into the tray and use the strapping machine. | Bulk packaging means that the SMD components are freely packaged in a formed plastic box or bag. | Adhesive tape cut continuously in predetermined quantities. The cut strips are placed in boxes for safekeeping. |
Choose electronic components that are vacuum-sealed against water, dust, moisture, oxidation, corrosion, and even UV or RF pollution.
How to pack electronic components in cartons?
1. Choose the right box for your electronic components2. Use anti-static bubble film protect electronic component
3. Put it into the box, no buffer dead corner, 360-degree package.
4. Labeled as fragile to ensure that the courier knows what needs to be done with the package.
