Maxim Integrated DS1100LZ-200+
DS1100LZ-200+
Please send RFQ , we will respond immediately.
Maxim Integrated DS1100LZ-200+ information
Type
Parameter
Factory Lead Time
6 Weeks
Mount
Surface Mount
Mounting Type
Surface Mount
Package / Case
8-SOIC (0.154, 3.90mm Width)
Number of Pins
8
Weight
186.993455mg
Operating Temperature
-40°C~85°C
Packaging
Tube
Published
2012
JESD-609 Code
e3
Pbfree Code
yes
Part Status
Active
Moisture Sensitivity Level (MSL)
1 (Unlimited)
Number of Terminations
8
ECCN Code
EAR99
Terminal Finish
Matte Tin (Sn)
Subcategory
Delay Lines
Technology
CMOS
Voltage - Supply
3V~3.6V
Terminal Position
DUAL
Terminal Form
GULL WING
Peak Reflow Temperature (Cel)
260
Supply Voltage
3.3V
Base Part Number
DS1100L
Function
Nonprogrammable
Operating Supply Voltage
3.3V
Supply Voltage-Max (Vsup)
3.6V
Supply Voltage-Min (Vsup)
3V
Output Polarity
TRUE
Logic IC Type
SILICON DELAY LINE
Prop.
200 ns
Output Impedance
50Ohm
Number of Taps/Steps
5
Number of Independent Delays
1
Delay to 1st Tap
40ns
Programmable Delay Line
NO
Available Total Delays
200ns
Total Delay-Nom (td)
200 ns
Height
1.5mm
Length
5mm
Width
4mm
Radiation Hardening
No
RoHS Status
ROHS3 Compliant
Lead Free
Lead Free
- Datasheets :
- Environmental Information :
- ConflictMineralStatement :
maximintegrated-ds1075z66n-conflictmineralstatement-7504.pdf
DS1100LZ-200+ Overview
For cost-effective packaging, Tube is used. The 8-SOIC (0.154, 3.90mm Width) package eliminates the need for additional insulating hardware in applications. As a result of the supply voltage of 3V~3.6V, reliable performance is possible. As a mounting method, the technique Surface Mount is used. A temperature range of -40°C~85°C is available. As a result, it is configured with 5 taps/steps. A number of related parts with the same base part number DS1100L are universally preferred for a wide range of applications. Terminals are located at DUAL. The system is equipped with 8 terminations for a unique configuration. When the device is operating, the supply voltage of 3.3V is provided. It uses the logic type SILICON DELAY LINE. Developed on the basis of advanced CMOS technology. All benefits of the subcategory of Delay Lines are provided by this product. It is acceptable for it to operate with the minimum supply voltage of 3V. Using a maximum supply voltage of 3.6V is acceptable for it to operate. It is mounted in the way of Surface Mount. The design of the device is based on the use of 8 pins. For specific applications, it operates with a supply voltage of 3.3V.
DS1100LZ-200+ Features
Supply voltage at Tube volts
operate supply current at 3.3V
with SILICON DELAY LINE bits
With 3.3V I/O
DS1100LZ-200+ Applications
There are a lot of Maxim Integrated DS1100LZ-200+ Delay Lines Timing ICs applications.
- Signal Generators and Analyzers
- QDR/QDRII Memory Systems
- Digital Test Equipment
- Transponder design
- Network Hubs, Bridges, and Routers
- Broadband test and measurement
- High Vibration, High Acceleration Environments
- Clock De-Skewing
- Noise Discriminators/Pulse Qualifiers
- Delay Matching
- ImagePart NumberManufacturerPackage / CaseNumber of PinsSupply VoltageNumber of TerminationsOperating Supply VoltageVoltage - SupplyPbfree CodeView Compare
DS1100LZ-200+
Maxim Integrated8-SOIC (0.154, 3.90mm Width)
8
3.3 V
8
3.3 V
3V ~ 3.6V
yes
BQ32000DRNA8-SOIC (0.154, 3.90mm Width)
8
3.3 V
8
3.3 V
3V ~ 3.6V
yes
DS1100LZ-200+
VS
BQ32000DR
CY2305SXC-1HCypress Semiconductor Corp8-SOIC (0.154, 3.90mm Width)
8
3.3 V
8
3.3 V
3V ~ 3.6V
yes
DS1100LZ-200+
VS
CY2305SXC-1H
- CY2305SXI-1Cypress Semiconductor Corp
8-SOIC (0.154, 3.90mm Width)
8
3.3 V
8
3.3 V
3V ~ 3.6V
yes
DS1100LZ-200+
VS
CY2305SXI-1
P2I2305NZG-08SRON Semiconductor8-SOIC (0.154, 3.90mm Width)
8
3.3 V
8
3.3 V
3V ~ 3.6V
yes
DS1100LZ-200+
VS
P2I2305NZG-08SR
Aztec Electronics's Payment Terms
Aztec Electronics offers many types of payment options, and support in multiple currencies such as GBP, US dollars, RMB, etc. As relationships are built, payment plans can be established so that payments can be made on a predetermined time frame after receipt of the invoice.
T/T IN ADVANCE (Pay at time of order placement via wire transfer)
How to Ship Electronic Components?
We take great care when shipping electronics overseas. Both the U.S. and U.K. governments have imposed restrictions on air transport of electronics, according to the International Air Transport Association.
1. Understand the shipping rules of the destination country
Different countries have different regulations for shipping electronic equipment, check for certain certifications, and read the destination country's guidelines before shipping to prevent delays or confiscation of goods by customs.
2. Choose a reliable express logistics provider
From providing pick-up service to checking the status with real-time order number, conveniently track packages. At present, the logistics providers we cooperate with more include DHL, UPS, Fedex, TXT.
Of course, if you have a long-term cooperative freight forwarder or your own company's logistics account, you can pick up the goods directly from our warehouse
3. How much does it cost to ship the electronic components?
The shipping cost of electronic products depends on the size and weight of the package and the shipping distance. You can first ask us about the size/weight of the products we sell to estimate the shipping cost.
4. How long does it take to ship the electronic components?
If electronic component in stock, it is usually shipped before 5 o'clock on the same day, and it usually takes 5-10 working days to complete it by international express.
If it is a scheduled component, it needs to wait for the arrival of the parts, and then it will be inspected before delivery. If there are special circumstances, the sales staff will confirm with you. Weekends and holidays will also affect the delivery time of electronic products.
1. We provide 365 days warranty for all electronic components.
2. If you need a test report, please let us know. We have a long-term cooperative testing laboratory. If you have familiar testing laboratory, we can also ship to your designated laboratory for testing.
3. Where does Aztec Electronics mainly purchase electronic components from?
Distributors, free market, 48 global large-scale OEM factories in close contact with us (Great Price advantage, 100% original)
2.Are the ND-2's DS1100LZ-200+ price and stock displayed on the website accurate?
Aztec Electronics inventory fluctuates greatly and cannot be updated in time, it is recommended to confirm the order with Aztec Electronics salesperson or online customer service before payment.
You Also Ask
- How to test electronic components and quality inspections?
- How to transport your electronic components safely?
Need Any Service, please feel free contact us.
After the electronic components have passed the quality inspection of Aztec Electronics, there are generally the following five packaging forms for electronic components: Tape, Tube, Tray, Bulk and Ammo.
Tape/Reel | Tube | Tray | Bulk | Ammo |
Weave bulk chips into tapes and pack them into reels through SMD components packaging Tape Machine. Reel is the most commonly used. | When packaging, arrange the components in the same direction and put them into plastic tubes one at a time. | Choose tray package with the same specifications as the original manufacturer, put the components into the tray and use the strapping machine. | Bulk packaging means that the SMD components are freely packaged in a formed plastic box or bag. | Adhesive tape cut continuously in predetermined quantities. The cut strips are placed in boxes for safekeeping. |
Choose electronic components that are vacuum-sealed against water, dust, moisture, oxidation, corrosion, and even UV or RF pollution.
How to pack electronic components in cartons?
1. Choose the right box for your electronic components2. Use anti-static bubble film protect electronic component
3. Put it into the box, no buffer dead corner, 360-degree package.
4. Labeled as fragile to ensure that the courier knows what needs to be done with the package.
