Microchip Technology MCP41010-I/SN
MCP41010-I/SN
Please send RFQ , we will respond immediately.
Microchip Technology MCP41010-I/SN information
Type
Parameter
Factory Lead Time
1 Weeks
Contact Plating
Tin
Mount
Surface Mount
Mounting Type
Surface Mount
Package / Case
8-SOIC (0.154, 3.90mm Width)
Number of Pins
8
Operating Temperature
-40°C~85°C
Packaging
Tube
Published
2003
Tolerance
±20%
JESD-609 Code
e3
Pbfree Code
yes
Part Status
Active
Moisture Sensitivity Level (MSL)
1 (Unlimited)
Number of Terminations
8
ECCN Code
EAR99
Temperature Coefficient
800 ppm/°C
Resistance
10kOhm
Number of Positions
256
Technology
CMOS
Voltage - Supply
2.7V~5.5V
Terminal Position
DUAL
Terminal Form
GULL WING
Peak Reflow Temperature (Cel)
260
Number of Functions
1
Supply Voltage
5V
Frequency
10MHz
Reflow Temperature-Max (s)
40
Base Part Number
MCP41010
Pin Count
8
Number of Elements
1
Power Supplies
3/5V
Configuration
Potentiometer
Interface
SPI
Nominal Supply Current
340μA
Memory Type
Volatile
Max Supply Current
340μA
Quiescent Current
10nA
Bandwidth
1MHz
Resolution
1 B
Taper
Linear
Number of Taps
256
Max Supply Voltage (DC)
5.5V
Total Resistance
10000Ohm
Min Supply Voltage (DC)
2.7V
Resistance - Wiper (Ω) (Typ)
73
Resistor Terminal Voltage-Max
5V
Height
1.25mm
Length
4.9mm
Width
3.9mm
Radiation Hardening
No
REACH SVHC
No SVHC
RoHS Status
ROHS3 Compliant
Lead Free
Lead Free
- Datasheets :
- PCN Assembly/Origin :
- PCN Packaging :
- ConflictMineralStatement :
microchip-dsc1123ci5400000-conflictmineralstatement-4089.pdf
MCP41010-I/SN Overview
A package containing it contains 8-SOIC (0.154, 3.90mm Width).The pentometer is stored from Volatile.Tube package provides access to it.256 taps protect this pentometer against overcurrent.Positions are 256.A termination of 8 is intended.You can refer to 1 functions in this programmable potentiometer.According to the diagram, the speed potentiometers's total resistance is 10000Ohm.In order for it to perform, it relies on 5V.In the digi devices, 8 pins can be seen.The mounting direction should be Surface Mount.There is 2.7V~5.5V voltage limit on the potentionmeter.This digital potentiometer is used to detect temperature in the -40°C~85°C range.You can limit the flow by using 10kOhm.Family MCP41010 includes pentometer.The mount is Surface Mount.potentiameter with 8 pins.There is a possibility of delivering voltage at 3/5V.Despite its 10MHz frequency, it can maintain high accuracy.The maximum supply current digital potentiometer can handle is 340μA.Potentiameter consumes quiescent current at 10nA.The element consists of 1 elements.
MCP41010-I/SN Features
Available in 8-SOIC (0.154, 3.90mm Width) package
Mounting Type: Surface Mount
Operate temperature at the range of -40°C~85°C
8 pins
Quiescent Current at 10nA
MCP41010-I/SN Applications
There are a lot of Microchip Technology MCP41010-I/SN Digital Potentiometers applications.
- Noise-free volume controller
- DC/DC conversion circuit
- Household appliances
- Audio Volume control
- Testing equipment
- Low power system
- Programmable I to V converter
- Brightness of monitors
- Communication device
- Voltage control
- ImagePart NumberManufacturerPackage / CaseNumber of PinsResistanceNumber of TapsToleranceTemperature CoefficientMemory TypeInterfaceMin Supply Voltage (DC)Supply VoltageView Compare
MCP41010-I/SN
Microchip Technology8-SOIC (0.154, 3.90mm Width)
8
10 kΩ
256
±20%
800 ppm/°C
Volatile
SPI
2.7 V
5 V
AD8400ARZ10Analog Devices Inc.8-SOIC (0.154, 3.90mm Width)
8
10 kΩ
256
±20%
500 ppm/°C
Volatile
SPI
-
3 V
MCP41010-I/SN
VS
AD8400ARZ10
AD5220BRZ10Analog Devices Inc.8-SOIC (0.154, 3.90mm Width)
8
10 kΩ
128
±30%
800 ppm/°C
Volatile
Up/Down (U/D, CS)
-
3 V
MCP41010-I/SN
VS
AD5220BRZ10
- AD8400ARZ10-REELAnalog Devices Inc.
8-SOIC (0.154, 3.90mm Width)
8
10 kΩ
256
±20%
500 ppm/°C
Volatile
SPI
-
3 V
MCP41010-I/SN
VS
AD8400ARZ10-REEL
- MCP41010T-I/SNMicrochip Technology
8-SOIC (0.154, 3.90mm Width)
8
10 kΩ
256
±20%
800 ppm/°C
Volatile
SPI
-
5 V
MCP41010-I/SN
VS
MCP41010T-I/SN
Aztec Electronics's Payment Terms
Aztec Electronics offers many types of payment options, and support in multiple currencies such as GBP, US dollars, RMB, etc. As relationships are built, payment plans can be established so that payments can be made on a predetermined time frame after receipt of the invoice.
T/T IN ADVANCE (Pay at time of order placement via wire transfer)
How to Ship Electronic Components?
We take great care when shipping electronics overseas. Both the U.S. and U.K. governments have imposed restrictions on air transport of electronics, according to the International Air Transport Association.
1. Understand the shipping rules of the destination country
Different countries have different regulations for shipping electronic equipment, check for certain certifications, and read the destination country's guidelines before shipping to prevent delays or confiscation of goods by customs.
2. Choose a reliable express logistics provider
From providing pick-up service to checking the status with real-time order number, conveniently track packages. At present, the logistics providers we cooperate with more include DHL, UPS, Fedex, TXT.
Of course, if you have a long-term cooperative freight forwarder or your own company's logistics account, you can pick up the goods directly from our warehouse
3. How much does it cost to ship the electronic components?
The shipping cost of electronic products depends on the size and weight of the package and the shipping distance. You can first ask us about the size/weight of the products we sell to estimate the shipping cost.
4. How long does it take to ship the electronic components?
If electronic component in stock, it is usually shipped before 5 o'clock on the same day, and it usually takes 5-10 working days to complete it by international express.
If it is a scheduled component, it needs to wait for the arrival of the parts, and then it will be inspected before delivery. If there are special circumstances, the sales staff will confirm with you. Weekends and holidays will also affect the delivery time of electronic products.
1. We provide 365 days warranty for all electronic components.
2. If you need a test report, please let us know. We have a long-term cooperative testing laboratory. If you have familiar testing laboratory, we can also ship to your designated laboratory for testing.
3. Where does Aztec Electronics mainly purchase electronic components from?
Distributors, free market, 48 global large-scale OEM factories in close contact with us (Great Price advantage, 100% original)
2.Are the Microchip Technology's MCP41010-I/SN price and stock displayed on the website accurate?
Aztec Electronics inventory fluctuates greatly and cannot be updated in time, it is recommended to confirm the order with Aztec Electronics salesperson or online customer service before payment.
You Also Ask
- How to test electronic components and quality inspections?
- How to transport your electronic components safely?
Need Any Service, please feel free contact us.
After the electronic components have passed the quality inspection of Aztec Electronics, there are generally the following five packaging forms for electronic components: Tape, Tube, Tray, Bulk and Ammo.
Tape/Reel | Tube | Tray | Bulk | Ammo |
Weave bulk chips into tapes and pack them into reels through SMD components packaging Tape Machine. Reel is the most commonly used. | When packaging, arrange the components in the same direction and put them into plastic tubes one at a time. | Choose tray package with the same specifications as the original manufacturer, put the components into the tray and use the strapping machine. | Bulk packaging means that the SMD components are freely packaged in a formed plastic box or bag. | Adhesive tape cut continuously in predetermined quantities. The cut strips are placed in boxes for safekeeping. |
Choose electronic components that are vacuum-sealed against water, dust, moisture, oxidation, corrosion, and even UV or RF pollution.
How to pack electronic components in cartons?
1. Choose the right box for your electronic components2. Use anti-static bubble film protect electronic component
3. Put it into the box, no buffer dead corner, 360-degree package.
4. Labeled as fragile to ensure that the courier knows what needs to be done with the package.
