Microchip Technology ATM90E32AS-AU-R
ATM90E32AS-AU-R
Please send RFQ , we will respond immediately.
Microchip Technology ATM90E32AS-AU-R information
Type
Parameter
Factory Lead Time
10 Weeks
Mount
Surface Mount
Mounting Type
Surface Mount
Package / Case
48-TQFP
Number of Pins
48
Operating Temperature
-40°C~85°C
Packaging
Tape & Reel (TR)
Published
1999
JESD-609 Code
e3
Pbfree Code
yes
Part Status
Active
Moisture Sensitivity Level (MSL)
3 (168 Hours)
Number of Terminations
48
Type
Integrated Circuit (IC)
Terminal Finish
Matte Tin (Sn) - annealed
Subcategory
Other Analog ICs
Voltage - Supply
2.8V~3.6V
Terminal Position
QUAD
Terminal Form
GULL WING
Number of Functions
1
Supply Voltage
3.3V
Base Part Number
ATM90E32AS
Operating Supply Voltage
3.3V
Supply Voltage-Max (Vsup)
3.6V
Supply Voltage-Min (Vsup)
2.8V
Interface
SPI
Operating Supply Current
13mA
Nominal Supply Current
13mA
Max Frequency
16.384MHz
Max Junction Temperature (Tj)
150°C
Input Impedance
50kOhm 80kOhm 120kOhm
Meter Type
3 Phase
Measurement Error
0.5%
Voltage - I/O Low
0.4V 0.8V
Voltage - I/O High
3.2V 5.5V
Height
1.2mm
Length
7mm
Width
7mm
Radiation Hardening
No
RoHS Status
ROHS3 Compliant
Lead Free
Lead Free
- Datasheets :
- PCN Design/Specification :
microchiptechnology-ata8204p3ctkqw-pcndesignspecification-9786.pdf
- PCN Packaging :
- TechnicalDrawing :
- ConflictMineralStatement :
microchip-dsc1123ci5400000-conflictmineralstatement-4089.pdf
ATM90E32AS-AU-R Overview
Tape & Reel (TR)-packaged. The 48-TQFP package can be found here. It is suitable for use as a 3 Phase meter. We have it in Surface Mount. Temperature at -40°C~85°C is extended during operation. The power supply is 2.8V~3.6V. You can find more similar parts by searching ATM90E32AS. There is a voltage of 0.4V 0.8V on the low-level I/O ports of this PMIC. There is a voltage 3.2V 5.5V on this device for high-level I/Os. There are 48 terminations included in this part. A normal voltage will be needed for this part, which is 3.3V. To be able to operate this device, the user should be aware that a voltage of 2.8V or higher is required in order for it to work. The maximum voltage that goes to the device should be keep under 3.6V. Logic gate applications are made possible by this 48 solution. It comes with a Surface Mount device for easy mounting and dismounting. To be specific, this is a Other Analog ICs for specialized needs. In order to ensure the PMIC works normally, it is advised that you set the supply current to zero. 3.3V can be used to provide power to this device. As far as frequency is concerned, this device can operate up to 16.384MHz.
ATM90E32AS-AU-R Features
3 Phase meter.
Operating maximum frequency: 16.384MHz.
ATM90E32AS-AU-R Applications
There are a lot of Microchip Technology ATM90E32AS-AU-R Energy Metering ICs applications.
- Power monitoring/power budgeting
- Base Station Power Distribution Systems
- Power monitoring instruments
- Subsystem Power Measurement
- Central office equipment
- Industrial Lighting Power Monitoring
- Power Monitoring for Home Automation
- General Purpose Energy Measurement
- Real-Time Measurement of Input Power for AC/DC Supplies
- Telecommunications and data communications equipment
- ImagePart NumberManufacturerPackage / CaseNumber of PinsInterfaceSupply VoltageMoisture Sensitivity Level (MSL)Number of TerminationsTerminal PositionMounting TypeView Compare
ATM90E32AS-AU-R
Microchip Technology48-TQFP
48
SPI
3.3 V
3 (168 Hours)
48
QUAD
Surface Mount
STP24DP05BTRSTMicroelectronics48-TQFP Exposed Pad
48
-
3.3 V
3 (168 Hours)
48
QUAD
Surface Mount
ATM90E32AS-AU-R
VS
STP24DP05BTR
- ATSAMD20G16A-AUMicrochip Technology
48-TQFP
48
I2C, SPI, UART, USART
3.3 V
3 (168 Hours)
48
QUAD
Surface Mount
ATM90E32AS-AU-R
VS
ATSAMD20G16A-AU
- ATSAMD20G15A-AUMicrochip Technology
48-TQFP
48
I2C, SPI, UART, USART
3.3 V
3 (168 Hours)
48
QUAD
Surface Mount
ATM90E32AS-AU-R
VS
ATSAMD20G15A-AU
- ATSAMD20G14A-AUMicrochip Technology
48-TQFP
48
I2C, SPI, UART, USART
3.3 V
3 (168 Hours)
48
QUAD
Surface Mount
ATM90E32AS-AU-R
VS
ATSAMD20G14A-AU
Aztec Electronics's Payment Terms
Aztec Electronics offers many types of payment options, and support in multiple currencies such as GBP, US dollars, RMB, Rubles, etc. As relationships are built, payment plans can be established so that payments can be made on a predetermined time frame after receipt of the invoice.
T/T IN ADVANCE (Pay at time of order placement via wire transfer)
How to Ship Electronic Components?
We take great care when shipping electronics overseas. Both the U.S. and U.K. governments have imposed restrictions on air transport of electronics, according to the International Air Transport Association.
1. Understand the shipping rules of the destination country
Different countries have different regulations for shipping electronic equipment, check for certain certifications, and read the destination country's guidelines before shipping to prevent delays or confiscation of goods by customs.
2. Choose a reliable express logistics provider
From providing pick-up service to checking the status with real-time order number, conveniently track packages. At present, the logistics providers we cooperate with more include DHL, UPS, Fedex, TXT, SF Express.
Of course, if you have a long-term cooperative freight forwarder or your own company's logistics account, you can pick up the goods directly from our warehouse
3. How much does it cost to ship the electronic components?
The shipping cost of electronic products depends on the size and weight of the package and the shipping distance. You can first ask us about the size/weight of the products we sell to estimate the shipping cost.
4. How long does it take to ship the electronic components?
If electronic component in stock, it is usually shipped before 5 o'clock on the same day, and it usually takes 5-10 working days to complete it by international express.
If it is a scheduled component, it needs to wait for the arrival of the parts, and then it will be inspected before delivery. If there are special circumstances, the sales staff will confirm with you. Weekends and holidays will also affect the delivery time of electronic products.
1. We provide 365 days warranty for all electronic components.
2. If you need a test report, please let us know. We have a long-term cooperative testing laboratory. If you have familiar testing laboratory, we can also ship to your designated laboratory for testing.
3. Where does Aztec Electronics mainly purchase electronic components from?
Distributors, free market, 48 global large-scale OEM factories in close contact with us (Great Price advantage, 100% original)
2.Are the Microchip Technology's ATM90E32AS-AU-R price and stock displayed on the website accurate?
Aztec Electronics inventory fluctuates greatly and cannot be updated in time, it is recommended to confirm the order with Aztec Electronics salesperson or online customer service before payment.
You Also Ask
- How to test electronic components and quality inspections?
- How to transport your electronic components safely?
Need Any Service, please feel free contact us.
After the electronic components have passed the quality inspection of Aztec Electronics, there are generally the following five packaging forms for electronic components: Tape, Tube, Tray, Bulk and Ammo.
Tape/Reel | Tube | Tray | Bulk | Ammo |
Weave bulk chips into tapes and pack them into reels through SMD components packaging Tape Machine. Reel is the most commonly used. | When packaging, arrange the components in the same direction and put them into plastic tubes one at a time. | Choose tray package with the same specifications as the original manufacturer, put the components into the tray and use the strapping machine. | Bulk packaging means that the SMD components are freely packaged in a formed plastic box or bag. | Adhesive tape cut continuously in predetermined quantities. The cut strips are placed in boxes for safekeeping. |
Choose electronic components that are vacuum-sealed against water, dust, moisture, oxidation, corrosion, and even UV or RF pollution.
How to pack electronic components in cartons?
1. Choose the right box for your electronic components2. Use anti-static bubble film protect electronic component
3. Put it into the box, no buffer dead corner, 360-degree package.
4. Labeled as fragile to ensure that the courier knows what needs to be done with the package.
