Microchip Technology AT24C64D-XHM-T
AT24C64D-XHM-T
Please send RFQ , we will respond immediately.
Microchip Technology AT24C64D-XHM-T information
Type
Parameter
Factory Lead Time
7 Weeks
Mount
Surface Mount
Mounting Type
Surface Mount
Package / Case
8-TSSOP (0.173, 4.40mm Width)
Number of Pins
8
Operating Temperature
-40°C~85°C TA
Packaging
Tape & Reel (TR)
Published
1997
JESD-609 Code
e4
Pbfree Code
yes
Part Status
Active
Moisture Sensitivity Level (MSL)
1 (Unlimited)
Number of Terminations
8
Terminal Finish
Nickel/Palladium/Gold (Ni/Pd/Au)
Technology
CMOS
Voltage - Supply
1.7V~5.5V
Terminal Position
DUAL
Peak Reflow Temperature (Cel)
260
Number of Functions
1
Terminal Pitch
0.65mm
Reflow Temperature-Max (s)
40
Base Part Number
AT24C64D
Operating Supply Voltage
5V
Supply Voltage-Min (Vsup)
1.7V
Interface
2-Wire, I2C, Serial
Memory Size
64Kb 8K x 8
Nominal Supply Current
3mA
Memory Type
Non-Volatile
Clock Frequency
1MHz
Access Time
550ns
Memory Format
EEPROM
Memory Interface
I2C
Memory Width
8
Write Cycle Time - Word, Page
5ms
Density
64 kb
Standby Current-Max
0.000001A
Serial Bus Type
I2C
Endurance
1000000 Write/Erase Cycles
Write Cycle Time-Max (tWC)
5ms
Data Retention Time-Min
100
Write Protection
HARDWARE
I2C Control Byte
1010DDDR
Height Seated (Max)
1.2mm
Length
4.4mm
Width
3mm
Radiation Hardening
No
REACH SVHC
No SVHC
RoHS Status
ROHS3 Compliant
Lead Free
Lead Free
- Datasheets :
- PCN Design/Specification :
microchiptechnology-ata8204p3ctkqw-pcndesignspecification-9786.pdf
- PCN Packaging :
- ConflictMineralStatement :
microchip-dsc1123ci5400000-conflictmineralstatement-4089.pdf
AT24C64D-XHM-T Overview
As far as its memory type goes, it falls into the Non-Volatile category. There is a Tape & Reel (TR) case available. The case is embedded in 8-TSSOP (0.173, 4.40mm Width). There is 64Kb 8K x 8 of memory on the chip. The device uses a mainstream EEPROM-format memory. This device has an extended operating temperature range of -40°C~85°C TA, so it's perfect for a wide range of demanding applications. It is supplied votage within 1.7V~5.5V. It is recommended that the mounting type be Surface Mount. On the chip, there are 8 terminations. There are 1 functions supported by this part as part of the comprehensive working process. In the memory, there is a clock frequency rotation that ranges 1MHz. Similar parts are frequently selected using AT24C64D, the device's base part number. In this ic memory chip, there is an 8-pin package that encloses the device. This memory's operating supply voltage is 5V. In this chip, Surface Mount mounting is used, a straightforward, high-efficiency mounting method. In terms of its nominal supply current, this memory component is rated at 3mA. By integrating with the I2C-type serial bus, this memory transmits data to the processor.
AT24C64D-XHM-T Features
Package / Case: 8-TSSOP (0.173, 4.40mm Width)
8 Pins
Operating Supply Voltage:5V
AT24C64D-XHM-T Applications
There are a lot of Microchip Technology AT24C64D-XHM-T Memory applications.
- hard disk drive (HDD)
- eDRAM
- cell phones
- main computer memory
- Cache memory
- telecommunications
- mainframes
- Camcorders
- personal digital assistants
- multimedia computers
- ImagePart NumberManufacturerPackage / CaseNumber of PinsDensityAccess TimeInterfaceNumber of TerminationsMountMoisture Sensitivity Level (MSL)View Compare
AT24C64D-XHM-T
Microchip Technology8-TSSOP (0.173, 4.40mm Width)
8
64 kb
550ns
2-Wire, I2C, Serial
8
Surface Mount
1 (Unlimited)
- CAT24C64YI-GT3ON Semiconductor
8-TSSOP (0.173, 4.40mm Width)
8
64 kb
400ns
2-Wire, I2C, Serial
8
Surface Mount
1 (Unlimited)
AT24C64D-XHM-T
VS
CAT24C64YI-GT3
- M24C64-RDW6TPSTMicroelectronics
8-TSSOP (0.173, 4.40mm Width)
8
64 kb
450ns
2-Wire, I2C, Serial
8
Surface Mount
1 (Unlimited)
AT24C64D-XHM-T
VS
M24C64-RDW6TP
- M24C64-FDW6TPSTMicroelectronics
8-TSSOP (0.173, 4.40mm Width)
8
64 kb
450ns
2-Wire, I2C, Serial
8
Surface Mount
1 (Unlimited)
AT24C64D-XHM-T
VS
M24C64-FDW6TP
- M24C64-DRDW3TP/KSTMicroelectronics
8-TSSOP (0.173, 4.40mm Width)
8
64 kb
450ns
2-Wire, I2C, Serial
8
Surface Mount
1 (Unlimited)
AT24C64D-XHM-T
VS
M24C64-DRDW3TP/K
Aztec Electronics's Payment Terms
Aztec Electronics offers many types of payment options, and support in multiple currencies such as GBP, US dollars, RMB, etc. As relationships are built, payment plans can be established so that payments can be made on a predetermined time frame after receipt of the invoice.
T/T IN ADVANCE (Pay at time of order placement via wire transfer)
How to Ship Electronic Components?
We take great care when shipping electronics overseas. Both the U.S. and U.K. governments have imposed restrictions on air transport of electronics, according to the International Air Transport Association.
1. Understand the shipping rules of the destination country
Different countries have different regulations for shipping electronic equipment, check for certain certifications, and read the destination country's guidelines before shipping to prevent delays or confiscation of goods by customs.
2. Choose a reliable express logistics provider
From providing pick-up service to checking the status with real-time order number, conveniently track packages. At present, the logistics providers we cooperate with more include DHL, UPS, Fedex, TXT.
Of course, if you have a long-term cooperative freight forwarder or your own company's logistics account, you can pick up the goods directly from our warehouse
3. How much does it cost to ship the electronic components?
The shipping cost of electronic products depends on the size and weight of the package and the shipping distance. You can first ask us about the size/weight of the products we sell to estimate the shipping cost.
4. How long does it take to ship the electronic components?
If electronic component in stock, it is usually shipped before 5 o'clock on the same day, and it usually takes 5-10 working days to complete it by international express.
If it is a scheduled component, it needs to wait for the arrival of the parts, and then it will be inspected before delivery. If there are special circumstances, the sales staff will confirm with you. Weekends and holidays will also affect the delivery time of electronic products.
1. We provide 365 days warranty for all electronic components.
2. If you need a test report, please let us know. We have a long-term cooperative testing laboratory. If you have familiar testing laboratory, we can also ship to your designated laboratory for testing.
3. Where does Aztec Electronics mainly purchase electronic components from?
Distributors, free market, 48 global large-scale OEM factories in close contact with us (Great Price advantage, 100% original)
2.Are the Microchip Technology's AT24C64D-XHM-T price and stock displayed on the website accurate?
Aztec Electronics inventory fluctuates greatly and cannot be updated in time, it is recommended to confirm the order with Aztec Electronics salesperson or online customer service before payment.
You Also Ask
- How to test electronic components and quality inspections?
- How to transport your electronic components safely?
Need Any Service, please feel free contact us.
After the electronic components have passed the quality inspection of Aztec Electronics, there are generally the following five packaging forms for electronic components: Tape, Tube, Tray, Bulk and Ammo.
Tape/Reel | Tube | Tray | Bulk | Ammo |
Weave bulk chips into tapes and pack them into reels through SMD components packaging Tape Machine. Reel is the most commonly used. | When packaging, arrange the components in the same direction and put them into plastic tubes one at a time. | Choose tray package with the same specifications as the original manufacturer, put the components into the tray and use the strapping machine. | Bulk packaging means that the SMD components are freely packaged in a formed plastic box or bag. | Adhesive tape cut continuously in predetermined quantities. The cut strips are placed in boxes for safekeeping. |
Choose electronic components that are vacuum-sealed against water, dust, moisture, oxidation, corrosion, and even UV or RF pollution.
How to pack electronic components in cartons?
1. Choose the right box for your electronic components2. Use anti-static bubble film protect electronic component
3. Put it into the box, no buffer dead corner, 360-degree package.
4. Labeled as fragile to ensure that the courier knows what needs to be done with the package.
