Maxim Integrated MAX19707ETM+
MAX19707ETM+
Please send RFQ , we will respond immediately.
Maxim Integrated MAX19707ETM+ information
Type
Parameter
Factory Lead Time
6 Weeks
Package / Case
48-WFQFN Exposed Pad
Surface Mount
YES
Number of Pins
48
Packaging
Tray
Published
2007
JESD-609 Code
e3
Pbfree Code
yes
Part Status
Active
Moisture Sensitivity Level (MSL)
1 (Unlimited)
Number of Terminations
48
ECCN Code
5A991.B.1
Terminal Finish
Matte Tin (Sn)
Max Operating Temperature
85°C
Min Operating Temperature
-40°C
Subcategory
Modems
Power Rating
84.6mW
Max Power Dissipation
84.6mW
Terminal Position
QUAD
Peak Reflow Temperature (Cel)
260
Number of Functions
1
Supply Voltage
3V
Terminal Pitch
0.5mm
Reflow Temperature-Max (s)
30
Base Part Number
MAX19707
Pin Count
48
Operating Supply Voltage
3V
Temperature Grade
INDUSTRIAL
Number of Channels
4
Interface
Serial
Max Supply Voltage
3.3V
Min Supply Voltage
2.7V
Operating Supply Current
16.5mA
Number of Bits
10
Quiescent Current
35mA
Resolution
1.25 B
Sampling Rate
45 Msps
Voltage - Supply, Analog
2.7V~3.3V
Voltage - Supply, Digital
2.7V~3.3V
Number of A/D Converters
2
Telecom IC Type
TELECOM CIRCUIT
Number of Converters
8
Conversion Rate
45 Msps
Signal to Noise Ratio (SNR)
54.2 dB
Length
7mm
Width
7mm
Radiation Hardening
No
RoHS Status
ROHS3 Compliant
Lead Free
Lead Free
- Datasheets :
- Application Notes :
- ConflictMineralStatement :
maximintegrated-ds1075z66n-conflictmineralstatement-7504.pdf
MAX19707ETM+ Overview
In the manner of 48-WFQFN Exposed Pad, it is packaged as it is.10 Bits were used in the design of this electronic part.Tray contains it.In the 48 termination, an impedance-matching device is used for terminating a transmission line. This is referred to as the 48 termination.Using 2.7V~3.3V, this electrical device converts AC voltage into regulated DC voltage and drives a load with regulated DC power.It is important to note that the supply/digital voltage of this electrical device is 2.7V~3.3V.Based on the base part number, it will be possible for the related parts to be located.As far as the supply voltage goes, it should be kept at 3V.In terms of its design, it has 48 pins.It operates with the minimal operating temperature of -40°C to ensure its reliability.For reliability, it operates at 85°C, its maximal operating temperature.The pin count is 48.It supports the maximal supply voltage of 3.3V.The maximal voltage supplied for its operation reaches 2.7V.There is a high probability of obtaining high efficiency if the supply voltage at 3V is maintained.Powered by 16.5mA supply current, this DC switching regulator switches DC signals.Modems contains this part.A 8 converter can be used to convert numbers into words and figures into words as well.It uses TELECOM CIRCUIT as the telecom IC.In addition to 2 A/D converters, microcontrollers can read and process analog signals like voltage in digital form.
MAX19707ETM+ Features
MAX19707ETM+ Applications
There are a lot of Maxim Integrated MAX19707ETM+ AFE applications.
- Wireless local loop
- TD-SCDMA, WiMAX
- RADAR processing, digital oscilloscopes
- GSM, EDGE, PHS, UMTS, WCDMA, CDMA2000,
- Smart antenna systems
- Imaging Systems
- AC motor control
- Medical Imaging
- Automotive
- Music recording
- ImagePart NumberManufacturerPackage / CaseNumber of PinsInterfaceMin Supply VoltageSupply VoltageMax Supply VoltageRoHS StatusPbfree CodeView Compare
MAX19707ETM+
Maxim Integrated48-WFQFN Exposed Pad
48
Serial
2.7 V
3 V
3.3 V
ROHS3 Compliant
yes
TLV320AIC3106IRGZTNA48-VFQFN Exposed Pad
48
2-Wire, I2C, SPI, Serial
2.7 V
1.8 V
3.6 V
ROHS3 Compliant
yes
MAX19707ETM+
VS
TLV320AIC3106IRGZT
- TLV320AIC3106IRGZRNA
48-VFQFN Exposed Pad
48
2-Wire, I2C, SPI, Serial
2.7 V
1.8 V
3.6 V
ROHS3 Compliant
yes
MAX19707ETM+
VS
TLV320AIC3106IRGZR
- MAX2831ETM+Maxim Integrated
48-WFQFN Exposed Pad
48
Parallel, SPI, Serial
-
-
-
ROHS3 Compliant
yes
MAX19707ETM+
VS
MAX2831ETM+
- MAX19705ETM+Maxim Integrated
-
48
Parallel, SPI, Serial
2.7 V
3 V
3.3 V
ROHS3 Compliant
yes
MAX19707ETM+
VS
MAX19705ETM+
Aztec Electronics's Payment Terms
Aztec Electronics offers many types of payment options, and support in multiple currencies such as GBP, US dollars, RMB, Rubles, etc. As relationships are built, payment plans can be established so that payments can be made on a predetermined time frame after receipt of the invoice.
T/T IN ADVANCE (Pay at time of order placement via wire transfer)
How to Ship Electronic Components?
We take great care when shipping electronics overseas. Both the U.S. and U.K. governments have imposed restrictions on air transport of electronics, according to the International Air Transport Association.
1. Understand the shipping rules of the destination country
Different countries have different regulations for shipping electronic equipment, check for certain certifications, and read the destination country's guidelines before shipping to prevent delays or confiscation of goods by customs.
2. Choose a reliable express logistics provider
From providing pick-up service to checking the status with real-time order number, conveniently track packages. At present, the logistics providers we cooperate with more include DHL, UPS, Fedex, TXT, SF Express.
Of course, if you have a long-term cooperative freight forwarder or your own company's logistics account, you can pick up the goods directly from our warehouse
3. How much does it cost to ship the electronic components?
The shipping cost of electronic products depends on the size and weight of the package and the shipping distance. You can first ask us about the size/weight of the products we sell to estimate the shipping cost.
4. How long does it take to ship the electronic components?
If electronic component in stock, it is usually shipped before 5 o'clock on the same day, and it usually takes 5-10 working days to complete it by international express.
If it is a scheduled component, it needs to wait for the arrival of the parts, and then it will be inspected before delivery. If there are special circumstances, the sales staff will confirm with you. Weekends and holidays will also affect the delivery time of electronic products.
1. We provide 365 days warranty for all electronic components.
2. If you need a test report, please let us know. We have a long-term cooperative testing laboratory. If you have familiar testing laboratory, we can also ship to your designated laboratory for testing.
3. Where does Aztec Electronics mainly purchase electronic components from?
Distributors, free market, 48 global large-scale OEM factories in close contact with us (Great Price advantage, 100% original)
2.Are the Maxim Integrated's MAX19707ETM+ price and stock displayed on the website accurate?
Aztec Electronics inventory fluctuates greatly and cannot be updated in time, it is recommended to confirm the order with Aztec Electronics salesperson or online customer service before payment.
You Also Ask
- How to test electronic components and quality inspections?
- How to transport your electronic components safely?
Need Any Service, please feel free contact us.
After the electronic components have passed the quality inspection of Aztec Electronics, there are generally the following five packaging forms for electronic components: Tape, Tube, Tray, Bulk and Ammo.
Tape/Reel | Tube | Tray | Bulk | Ammo |
Weave bulk chips into tapes and pack them into reels through SMD components packaging Tape Machine. Reel is the most commonly used. | When packaging, arrange the components in the same direction and put them into plastic tubes one at a time. | Choose tray package with the same specifications as the original manufacturer, put the components into the tray and use the strapping machine. | Bulk packaging means that the SMD components are freely packaged in a formed plastic box or bag. | Adhesive tape cut continuously in predetermined quantities. The cut strips are placed in boxes for safekeeping. |
Choose electronic components that are vacuum-sealed against water, dust, moisture, oxidation, corrosion, and even UV or RF pollution.
How to pack electronic components in cartons?
1. Choose the right box for your electronic components2. Use anti-static bubble film protect electronic component
3. Put it into the box, no buffer dead corner, 360-degree package.
4. Labeled as fragile to ensure that the courier knows what needs to be done with the package.
