Integrated Device Technology (IDT) 23S08-1DCG8
23S08-1DCG8
Please send RFQ , we will respond immediately.
Integrated Device Technology (IDT) 23S08-1DCG8 information
Type
Parameter
Factory Lead Time
7 Weeks
Contact Plating
Tin
Mount
Surface Mount
Package / Case
SOIC
Number of Pins
16
Packaging
Tape and Reel
Published
2009
JESD-609 Code
e3
Pbfree Code
yes
Part Status
Active
Moisture Sensitivity Level (MSL)
3
Number of Terminations
16
ECCN Code
EAR99
Max Operating Temperature
70°C
Min Operating Temperature
0°C
Subcategory
Clock Drivers
Terminal Position
DUAL
Terminal Form
GULL WING
Peak Reflow Temperature (Cel)
NOT SPECIFIED
Number of Functions
1
Supply Voltage
3.3V
Reflow Temperature-Max (s)
NOT SPECIFIED
Pin Count
16
Qualification Status
Not Qualified
Operating Supply Voltage
3.3V
Temperature Grade
COMMERCIAL
Number of Circuits
1
Max Supply Voltage
3.6V
Min Supply Voltage
3V
Nominal Supply Current
45mA
Frequency (Max)
133.3MHz
Family
23S
Output Characteristics
3-STATE
Input
LVTTL
Logic IC Type
PLL BASED CLOCK DRIVER
Max I(ol)
0.008 A
Same Edge Skew-Max (tskwd)
0.2 ns
Number of True Outputs
8
Length
9.9mm
Width
3.9mm
Thickness
1.5mm
RoHS Status
RoHS Compliant
Lead Free
Lead Free
- Datasheets :
23S08-1DCG8 Overview
As a clock IC, PLLs is packaged using the Tape and Reel method. In the SOIC package, there is an embedded clock generator. A maximum temperature of NOT SPECIFIED can be sustained by this clock generator ic during reflowing. It contains a total of 16 terminations within RF synthesizer. Basically, a voltage of 3.3V should be applied to this electronic frequency generator. LVTTL is designed for clock generator's input. An implementation of 1 circuits is required in order to fully utili1e the capabilities of the electrical part. It provides a maximum frequency of 133.3MHz. Microprocessor-specific clock PLL with 16 bits. There are 16 pins that are available on the clock PLL. Despite its low operating temperature, this clock generator has 0°C operations. There is even a possibility that this clock generator ic will last even when the temperature is 70°C. There is a maximum supply voltage of 3.3V that electronic frequency generator can handle. Clock Drivers-type frequency generators are usually classified as this type. There is a low timing skew at 0.2 nsmax with this RF synthesizer. There are 8 pins configured for enabling high true outputs on this clock generator. If you search for the 23S family of parts, you will be able to find similar electrical parts. It is unacceptable to supply this clock PLL with a voltage higher than 3.6V. The lowest limit of supply voltage for this RF synthesizer is 3V. PLL BASED CLOCK DRIVER logic circuits mainly utiliPLL BASED CLOCK DRIVERe this time clock generator.
23S08-1DCG8 Features
Available in the SOIC
Supply voltage of 3.3V
Operating supply voltage of 3.3V
8 true outputs
23S08-1DCG8 Applications
There are a lot of Integrated Device Technology (IDT) 23S08-1DCG8 Clock Generators applications.
- Wireless base station for LTE, LTE-advanced
- Closed circuit systems
- Modems
- Clock generation systems
- Local oscillators (LOs)
- Mechanical devices
- Pagers
- Multiplexing communication
- FSK demodulators
- Pulsed digital systems
Aztec Electronics's Payment Terms
Aztec Electronics offers many types of payment options, and support in multiple currencies such as GBP, US dollars, RMB, etc. As relationships are built, payment plans can be established so that payments can be made on a predetermined time frame after receipt of the invoice.
T/T IN ADVANCE (Pay at time of order placement via wire transfer)
How to Ship Electronic Components?
We take great care when shipping electronics overseas. Both the U.S. and U.K. governments have imposed restrictions on air transport of electronics, according to the International Air Transport Association.
1. Understand the shipping rules of the destination country
Different countries have different regulations for shipping electronic equipment, check for certain certifications, and read the destination country's guidelines before shipping to prevent delays or confiscation of goods by customs.
2. Choose a reliable express logistics provider
From providing pick-up service to checking the status with real-time order number, conveniently track packages. At present, the logistics providers we cooperate with more include DHL, UPS, Fedex, TXT.
Of course, if you have a long-term cooperative freight forwarder or your own company's logistics account, you can pick up the goods directly from our warehouse
3. How much does it cost to ship the electronic components?
The shipping cost of electronic products depends on the size and weight of the package and the shipping distance. You can first ask us about the size/weight of the products we sell to estimate the shipping cost.
4. How long does it take to ship the electronic components?
If electronic component in stock, it is usually shipped before 5 o'clock on the same day, and it usually takes 5-10 working days to complete it by international express.
If it is a scheduled component, it needs to wait for the arrival of the parts, and then it will be inspected before delivery. If there are special circumstances, the sales staff will confirm with you. Weekends and holidays will also affect the delivery time of electronic products.
1. We provide 365 days warranty for all electronic components.
2. If you need a test report, please let us know. We have a long-term cooperative testing laboratory. If you have familiar testing laboratory, we can also ship to your designated laboratory for testing.
3. Where does Aztec Electronics mainly purchase electronic components from?
Distributors, free market, 48 global large-scale OEM factories in close contact with us (Great Price advantage, 100% original)
2.Are the Integrated Device Technology (IDT) 's 23S08-1DCG8 price and stock displayed on the website accurate?
Aztec Electronics inventory fluctuates greatly and cannot be updated in time, it is recommended to confirm the order with Aztec Electronics salesperson or online customer service before payment.
You Also Ask
- How to test electronic components and quality inspections?
- How to transport your electronic components safely?
Need Any Service, please feel free contact us.
After the electronic components have passed the quality inspection of Aztec Electronics, there are generally the following five packaging forms for electronic components: Tape, Tube, Tray, Bulk and Ammo.
Tape/Reel | Tube | Tray | Bulk | Ammo |
Weave bulk chips into tapes and pack them into reels through SMD components packaging Tape Machine. Reel is the most commonly used. | When packaging, arrange the components in the same direction and put them into plastic tubes one at a time. | Choose tray package with the same specifications as the original manufacturer, put the components into the tray and use the strapping machine. | Bulk packaging means that the SMD components are freely packaged in a formed plastic box or bag. | Adhesive tape cut continuously in predetermined quantities. The cut strips are placed in boxes for safekeeping. |
Choose electronic components that are vacuum-sealed against water, dust, moisture, oxidation, corrosion, and even UV or RF pollution.
How to pack electronic components in cartons?
1. Choose the right box for your electronic components2. Use anti-static bubble film protect electronic component
3. Put it into the box, no buffer dead corner, 360-degree package.
4. Labeled as fragile to ensure that the courier knows what needs to be done with the package.
