Diodes Incorporated BSS138-7-F
BSS138-7-F
Diodes Incorporated BSS138-7-F information
Type
Parameter
Factory Lead Time
16 Weeks
Contact Plating
Tin
Mount
Surface Mount
Mounting Type
Surface Mount
Package / Case
TO-236-3, SC-59, SOT-23-3
Number of Pins
3
Weight
7.994566mg
Transistor Element Material
SILICON
Operating Temperature
-55°C~150°C TJ
Packaging
Tape & Reel (TR)
Published
2003
JESD-609 Code
e3
Pbfree Code
yes
Part Status
Active
Moisture Sensitivity Level (MSL)
1 (Unlimited)
Number of Terminations
3
ECCN Code
EAR99
Resistance
3.5Ohm
Additional Feature
HIGH RELIABILITY, LOW THRESHOLD
Subcategory
FET General Purpose Powers
Voltage - Rated DC
50V
Technology
MOSFET (Metal Oxide)
Terminal Position
DUAL
Terminal Form
GULL WING
Peak Reflow Temperature (Cel)
260
Current Rating
200mA
Reflow Temperature-Max (s)
40
Pin Count
3
Qualification Status
Not Qualified
Number of Elements
1
Number of Channels
1
Voltage
50V
Power Dissipation-Max
300mW Ta
Element Configuration
Single
Current
2A
Operating Mode
ENHANCEMENT MODE
Power Dissipation
300mW
Turn On Delay Time
20 ns
FET Type
N-Channel
Transistor Application
SWITCHING
Rds On (Max) @ Id, Vgs
3.5 Ω @ 220mA, 10V
Vgs(th) (Max) @ Id
1.5V @ 250μA
Input Capacitance (Ciss) (Max) @ Vds
50pF @ 10V
Current - Continuous Drain (Id) @ 25°C
200mA Ta
Rise Time
10ns
Drive Voltage (Max Rds On,Min Rds On)
10V
Vgs (Max)
±20V
Fall Time (Typ)
25 ns
Turn-Off Delay Time
20 ns
Continuous Drain Current (ID)
200mA
Threshold Voltage
1.2V
Gate to Source Voltage (Vgs)
20V
Drain to Source Breakdown Voltage
50V
Nominal Vgs
1.2 V
Feedback Cap-Max (Crss)
8 pF
Height
1mm
Length
2.9mm
Width
1.3mm
REACH SVHC
No SVHC
RoHS Status
ROHS3 Compliant
Lead Free
Lead Free
- Datasheets :
- Environmental Information :
diodesincorporated-desd5v0s1ba7-environmentalinformation-9032.pdf
- PCN Design/Specification :
diodesincorporated-dlpt057f-pcndesignspecification-9774.pdf
diodesincorporated-tpd6v8lp7-pcndesignspecification-2689.pdf
- PCN Assembly/Origin :
- RohsStatement :
BSS138-7-F Overview
With either input grounded, the input capacitance parameter, CI, represents the capacitance between the input terminals of the op amp. This device has a maximum input capacitance of 50pF @ 10V.Its continuous drain current is 200mA for this device. Drain current refers to the capacity of the device to conduct continuous current.Single MOSFETs transistor is the voltage at which VDS flows at a specified ID value, wSingle MOSFETs transistorh VGS=50V, and this device has a drain-to-source breakdown voltage of 50V voltage.Input capacitance must be charged before drain current conduction can begin, so the turn-off delay time is 20 ns.Before drain current conduction begins, the device's input capacitance must be charged, so the delay time is 20 ns.Generally, the gate-source voltage (VGS) of a FET transistor is the voltage across its gate-source terminal, which is 20V.The threshold voltage is the point at which an electrical device activates any one of its operations, which for this transistor is 1.2V.Using drive voltage (10V) reduces this device's overall power consumption.
BSS138-7-F Features
a continuous drain current (ID) of 200mA
a drain-to-source breakdown voltage of 50V voltage
the turn-off delay time is 20 ns
a threshold voltage of 1.2V
BSS138-7-F Applications
There are a lot of Diodes Incorporated BSS138-7-F applications of single MOSFETs transistors.
- Motor Drives and Uninterruptible Power Supples
- Uninterruptible Power Supply
- Consumer Appliances
- Industrial Power Supplies
- DC-to-DC converters
- Battery Protection Circuit
- Telecom 1 Sever Power Supplies
- LCD/LED TV
- Motor drives and Uninterruptible Power Supplies
- DC/DC converters
- ImagePart NumberManufacturerMountPackage / CaseContinuous Drain Current (ID)Current - Continuous Drain (Id) @ 25°CThreshold VoltageGate to Source Voltage (Vgs)Power DissipationPower Dissipation-MaxView Compare
BSS138-7-F
Diodes IncorporatedSurface Mount
TO-236-3, SC-59, SOT-23-3
200 mA
200mA (Ta)
1.2 V
20 V
300 mW
300mW (Ta)
BSS138NH6327XTSA2Infineon TechnologiesSurface Mount
TO-236-3, SC-59, SOT-23-3
230 mA
230mA (Ta)
1 V
20 V
360 mW
360mW (Ta)
BSS138-7-F
VS
BSS138NH6327XTSA2
- BSS138KON Semiconductor
Surface Mount
TO-236-3, SC-59, SOT-23-3
220 mA
220mA (Ta)
600 mV
12 V
350 mW
350mW (Ta)
BSS138-7-F
VS
BSS138K
- BSS138ON Semiconductor
Surface Mount
TO-236-3, SC-59, SOT-23-3
220 mA
220mA (Ta)
1.3 V
20 V
360 mW
360mW (Ta)
BSS138-7-F
VS
BSS138
- 2N7002TADiodes Incorporated
Surface Mount
TO-236-3, SC-59, SOT-23-3
500 mA
115mA (Ta)
2.5 V
20 V
330 mW
330mW (Ta)
BSS138-7-F
VS
2N7002TA
Aztec Electronics's Payment Terms
Aztec Electronics offers many types of payment options, and support in multiple currencies such as GBP, US dollars, RMB, etc. As relationships are built, payment plans can be established so that payments can be made on a predetermined time frame after receipt of the invoice.
T/T IN ADVANCE (Pay at time of order placement via wire transfer)
How to Ship Electronic Components?
We take great care when shipping electronics overseas. Both the U.S. and U.K. governments have imposed restrictions on air transport of electronics, according to the International Air Transport Association.
1. Understand the shipping rules of the destination country
Different countries have different regulations for shipping electronic equipment, check for certain certifications, and read the destination country's guidelines before shipping to prevent delays or confiscation of goods by customs.
2. Choose a reliable express logistics provider
From providing pick-up service to checking the status with real-time order number, conveniently track packages. At present, the logistics providers we cooperate with more include DHL, UPS, Fedex, TXT.
Of course, if you have a long-term cooperative freight forwarder or your own company's logistics account, you can pick up the goods directly from our warehouse
3. How much does it cost to ship the electronic components?
The shipping cost of electronic products depends on the size and weight of the package and the shipping distance. You can first ask us about the size/weight of the products we sell to estimate the shipping cost.
4. How long does it take to ship the electronic components?
If electronic component in stock, it is usually shipped before 5 o'clock on the same day, and it usually takes 5-10 working days to complete it by international express.
If it is a scheduled component, it needs to wait for the arrival of the parts, and then it will be inspected before delivery. If there are special circumstances, the sales staff will confirm with you. Weekends and holidays will also affect the delivery time of electronic products.
1. We provide 365 days warranty for all electronic components.
2. If you need a test report, please let us know. We have a long-term cooperative testing laboratory. If you have familiar testing laboratory, we can also ship to your designated laboratory for testing.
3. Where does Aztec Electronics mainly purchase electronic components from?
Distributors, free market, 48 global large-scale OEM factories in close contact with us (Great Price advantage, 100% original)
2.Are the Diodes Incorporated's BSS138-7-F price and stock displayed on the website accurate?
Aztec Electronics inventory fluctuates greatly and cannot be updated in time, it is recommended to confirm the order with Aztec Electronics salesperson or online customer service before payment.
You Also Ask
- How to test electronic components and quality inspections?
- How to transport your electronic components safely?
Need Any Service, please feel free contact us.
After the electronic components have passed the quality inspection of Aztec Electronics, there are generally the following five packaging forms for electronic components: Tape, Tube, Tray, Bulk and Ammo.
Tape/Reel | Tube | Tray | Bulk | Ammo |
Weave bulk chips into tapes and pack them into reels through SMD components packaging Tape Machine. Reel is the most commonly used. | When packaging, arrange the components in the same direction and put them into plastic tubes one at a time. | Choose tray package with the same specifications as the original manufacturer, put the components into the tray and use the strapping machine. | Bulk packaging means that the SMD components are freely packaged in a formed plastic box or bag. | Adhesive tape cut continuously in predetermined quantities. The cut strips are placed in boxes for safekeeping. |
Choose electronic components that are vacuum-sealed against water, dust, moisture, oxidation, corrosion, and even UV or RF pollution.
How to pack electronic components in cartons?
1. Choose the right box for your electronic components2. Use anti-static bubble film protect electronic component
3. Put it into the box, no buffer dead corner, 360-degree package.
4. Labeled as fragile to ensure that the courier knows what needs to be done with the package.
