Cypress Semiconductor Corp CY7C68033-56LTXC
CY7C68033-56LTXC
Please send RFQ , we will respond immediately.
Cypress Semiconductor Corp CY7C68033-56LTXC information
Type
Parameter
Factory Lead Time
10 Weeks
Contact Plating
Gold, Tin
Mounting Type
Surface Mount
Package / Case
56-VFQFN Exposed Pad
Surface Mount
YES
Number of Pins
56
Operating Temperature
0°C~70°C
Packaging
Tray
Published
2003
Series
EZ-USB NX2LP-Flex™
JESD-609 Code
e3
Part Status
Active
Moisture Sensitivity Level (MSL)
3 (168 Hours)
Number of Terminations
56
Terminal Finish
Matte Tin (Sn)
Subcategory
Bus Controllers
Technology
CMOS
Voltage - Supply
3V~3.6V
Terminal Position
QUAD
Peak Reflow Temperature (Cel)
260
Supply Voltage
3.3V
Terminal Pitch
0.5mm
Frequency
12MHz
Reflow Temperature-Max (s)
30
Base Part Number
CY7C68033
Pin Count
56
Operating Supply Voltage
3.3V
Number of Channels
1
Number of I/O
12
RAM Size
15kB
uPs/uCs/Peripheral ICs Type
SECONDARY STORAGE CONTROLLER, FLASH MEMORY DRIVE
Data Rate
480 Mbps
ESD Protection
Yes
Controller Type
NAND Flash - USB
Host Interface Standard
USB
Height
900μm
Length
8mm
Width
8mm
Radiation Hardening
No
RoHS Status
ROHS3 Compliant
Lead Free
Lead Free
- Datasheets :
- Environmental Information :
cypresssemiconductorcorp-cy467269103pod-environmentalinformation-2998.pdf
- PCN Design/Specification :
- PCN Packaging :
cypresssemiconductorcorp-cy467269103pod-pcnpackaging-3002.pdf
CY7C68033-56LTXC Overview
Tray has packaged it with its materials. For the purpose of saving board space, it is provided in the 56-VFQFN Exposed Pad. As a type of NAND Flash - USB, it provides high quality and reliable performance. 0°C~70°C should be set as the operating temperature. Normal operation of 3V~3.6V requires the supply of voltage. Based on the technique of Surface Mount, it is mounted. By using its base part number CY7C68033, you can locate electronic parts that are related to this part. In order to prevent signals from reflecting off the end of the transmission line, 56 terminations are used. There is a voltage supply to the device of 3.3V. It is configured with 56 pins. As a result, the reflow temperature limit of 260 is determined by the component with the lowest tolerance for high temperatures. There are 56 channels in this type of electronic apart. Subcategory Bus Controllers includes it. Data transmission is ensured through 1 channels. Its uPs, uCs, and peripheral ICs are integrated with SECONDARY STORAGE CONTROLLER, FLASH MEMORY DRIVE. The device draws voltage from its supply in order to generate 3.3V. There is a widespread acceptance of it throughout the industry since it belongs to the EZ-USB NX2LP-Flex? series.
CY7C68033-56LTXC Features
Available in the 56-VFQFN Exposed Pad package
NAND Flash - USB as controller type
Operating temperature of 0°C~70°C
Operating supply voltage of 3.3V
CY7C68033-56LTXC Applications
There are a lot of Cypress Semiconductor Corp CY7C68033-56LTXC Memory Controllers applications.
- Point-of-Sale Systems
- eUSB, embedded USB module
- Medical Instrumentation and Industrial Products
- MultiMediaCardsTM (MMC)
- Solid State Disks (SSD)
- Computers
- Servers
- Security Flash Drive
- eMMC embedded Flash
- Multi-Chip-Packages (MCP)
- ImagePart NumberManufacturerPackage / CaseNumber of PinsData RateSupply VoltageTerminal PitchOperating Supply VoltageMoisture Sensitivity Level (MSL)RoHS StatusView Compare
CY7C68033-56LTXC
Cypress Semiconductor Corp56-VFQFN Exposed Pad
56
480 Mbps
3.3 V
0.5 mm
3.3 V
3 (168 Hours)
ROHS3 Compliant
- CY7C68320C-56LTXCCypress Semiconductor Corp
56-VFQFN Exposed Pad
56
480 Mbps
3.3 V
0.5 mm
3.3 V
3 (168 Hours)
ROHS3 Compliant
CY7C68033-56LTXC
VS
CY7C68320C-56LTXC
- CY7C68300C-56LTXCCypress Semiconductor Corp
56-VFQFN Exposed Pad
56
480 Mbps
3.3 V
0.5 mm
3.3 V
3 (168 Hours)
ROHS3 Compliant
CY7C68033-56LTXC
VS
CY7C68300C-56LTXC
- CY7C68034-56LTXICypress Semiconductor Corp
56-VFQFN Exposed Pad
56
480 Mbps
3.3 V
0.5 mm
3.3 V
3 (168 Hours)
ROHS3 Compliant
CY7C68033-56LTXC
VS
CY7C68034-56LTXI
USB2640I-HZH-02Microchip Technology48-VFQFN Exposed Pad
48
480 Mbps
3.3 V
0.5 mm
3.3 V
3 (168 Hours)
ROHS3 Compliant
CY7C68033-56LTXC
VS
USB2640I-HZH-02
Aztec Electronics's Payment Terms
Aztec Electronics offers many types of payment options, and support in multiple currencies such as GBP, US dollars, RMB, Rubles, etc. As relationships are built, payment plans can be established so that payments can be made on a predetermined time frame after receipt of the invoice.
T/T IN ADVANCE (Pay at time of order placement via wire transfer)
How to Ship Electronic Components?
We take great care when shipping electronics overseas. Both the U.S. and U.K. governments have imposed restrictions on air transport of electronics, according to the International Air Transport Association.
1. Understand the shipping rules of the destination country
Different countries have different regulations for shipping electronic equipment, check for certain certifications, and read the destination country's guidelines before shipping to prevent delays or confiscation of goods by customs.
2. Choose a reliable express logistics provider
From providing pick-up service to checking the status with real-time order number, conveniently track packages. At present, the logistics providers we cooperate with more include DHL, UPS, Fedex, TXT, SF Express.
Of course, if you have a long-term cooperative freight forwarder or your own company's logistics account, you can pick up the goods directly from our warehouse
3. How much does it cost to ship the electronic components?
The shipping cost of electronic products depends on the size and weight of the package and the shipping distance. You can first ask us about the size/weight of the products we sell to estimate the shipping cost.
4. How long does it take to ship the electronic components?
If electronic component in stock, it is usually shipped before 5 o'clock on the same day, and it usually takes 5-10 working days to complete it by international express.
If it is a scheduled component, it needs to wait for the arrival of the parts, and then it will be inspected before delivery. If there are special circumstances, the sales staff will confirm with you. Weekends and holidays will also affect the delivery time of electronic products.
1. We provide 365 days warranty for all electronic components.
2. If you need a test report, please let us know. We have a long-term cooperative testing laboratory. If you have familiar testing laboratory, we can also ship to your designated laboratory for testing.
3. Where does Aztec Electronics mainly purchase electronic components from?
Distributors, free market, 48 global large-scale OEM factories in close contact with us (Great Price advantage, 100% original)
2.Are the Cypress Semiconductor's CY7C68033-56LTXC price and stock displayed on the website accurate?
Aztec Electronics inventory fluctuates greatly and cannot be updated in time, it is recommended to confirm the order with Aztec Electronics salesperson or online customer service before payment.
You Also Ask
- How to test electronic components and quality inspections?
- How to transport your electronic components safely?
Need Any Service, please feel free contact us.
After the electronic components have passed the quality inspection of Aztec Electronics, there are generally the following five packaging forms for electronic components: Tape, Tube, Tray, Bulk and Ammo.
Tape/Reel | Tube | Tray | Bulk | Ammo |
Weave bulk chips into tapes and pack them into reels through SMD components packaging Tape Machine. Reel is the most commonly used. | When packaging, arrange the components in the same direction and put them into plastic tubes one at a time. | Choose tray package with the same specifications as the original manufacturer, put the components into the tray and use the strapping machine. | Bulk packaging means that the SMD components are freely packaged in a formed plastic box or bag. | Adhesive tape cut continuously in predetermined quantities. The cut strips are placed in boxes for safekeeping. |
Choose electronic components that are vacuum-sealed against water, dust, moisture, oxidation, corrosion, and even UV or RF pollution.
How to pack electronic components in cartons?
1. Choose the right box for your electronic components2. Use anti-static bubble film protect electronic component
3. Put it into the box, no buffer dead corner, 360-degree package.
4. Labeled as fragile to ensure that the courier knows what needs to be done with the package.
