Analog Devices Inc. ADN2814ACPZ
ADN2814ACPZ
In Stock:94131
Qty
Unit Price
Ext Price
1
$71.530000
$71.530000
10
$67.481000
$674.810000
Not the price you want? Send RFQ Now and we'll contact you ASAP.
Inquire for More Quantity
Add to RFQ list
Analog Devices Inc. ADN2814ACPZ information
Type
Parameter
Factory Lead Time
8 Weeks
Lifecycle Status
PRODUCTION (Last Updated: 5 days ago)
Mount
Surface Mount
Mounting Type
Surface Mount
Package / Case
32-WFQFN Exposed Pad, CSP
Number of Pins
32
Operating Temperature
-40°C~85°C
Packaging
Tray
JESD-609 Code
e3
Pbfree Code
no
Part Status
Active
Moisture Sensitivity Level (MSL)
3 (168 Hours)
Number of Terminations
32
Terminal Finish
Matte Tin (Sn)
Applications
SONET;SDH
Max Power Dissipation
435mW
Voltage - Supply
3V~3.6V
Terminal Position
QUAD
Peak Reflow Temperature (Cel)
260
Number of Functions
1
Supply Voltage
3.3V
Frequency
675MHz
Reflow Temperature-Max (s)
40
Base Part Number
ADN2814
Output
LVDS
Pin Count
32
Number of Outputs
2
Operating Supply Voltage
3.3V
Number of Circuits
1
Operating Supply Current
132mA
Nominal Supply Current
132mA
Power Dissipation
435mW
Max Supply Current
145mA
Data Rate
675 Mbps
Input
CML
Ratio - Input:Output
1:2
PLL
Yes
Differential - Input:Output
Yes/Yes
Main Purpose
SONET/SDH
Height
830μm
Length
5mm
Width
5mm
Radiation Hardening
No
REACH SVHC
No SVHC
RoHS Status
ROHS3 Compliant
Lead Free
Contains Lead
- Datasheets :
- ConflictMineralStatement :
analogdeviceslineartechnology-lt5400bhms8e8trpbf-conflictmineralstatement-8771.pdf
ADN2814ACPZ Overview
There is a package named Tray that contains it. A 32-WFQFN Exposed Pad, CSP-serial number is attached to the packaging of this product, which is packaged in a case. Surface Mount is the recommended mounting type. As far as terminations are concerned, there are 32. The part provides a voltage of 3.3V volts. To run 260, we utilize this part's peak reflow temperature. The device has 1. Clock program is possible to adjust the operating temperature range of -40°C~85°C. Depending on the component, a voltage of 3V~3.6V can be supplied. SONET/SDH is the main purpose of the component. A value of LVDS is intended as an output. Searching for information about ADN2814 starts with the base part number. Surface Mount is recommended for mounting. There are 32 pins on this device. There are 32 pins on it. The supply voltage should be kept at 3.3V. In this device, 2 outputs can be maintained. Supply current is available at 132mA. A frequency of 675MHz leads to excellent efficiency. In this case, it is suitable for the part based on SONET;SDH.
ADN2814ACPZ Features
Mounting Type: Surface Mount
Peak Reflow Temperature (Cel): 260
Include 1 Circuits
run the output at th range of LVDS
with 32 Pins
operate supply voltage at the range of 3.3V
ADN2814ACPZ Applications
There are a lot of Analog Devices Inc. ADN2814ACPZ application specific timer?applications.
- DU (Distribution Unit)
- 1 GbE and 10 GbE
- Small Cells, Mobile Backhaul/Fronthaul
- Test and Measurement
- Industrial, Embedded Computing
- Carrier Ethernet switches
- Fibre Channel, SAN
- Telecom line cards
- Communications
- PCI Express 2.0/3.0
- ImagePart NumberManufacturerPackage / CaseNumber of PinsSupply VoltageRoHS StatusOperating Supply VoltageVoltage - SupplyMoisture Sensitivity Level (MSL)Number of CircuitsView Compare
ADN2814ACPZ
Analog Devices Inc.32-WFQFN Exposed Pad, CSP
32
3.3 V
ROHS3 Compliant
3.3 V
3V ~ 3.6V
3 (168 Hours)
1
- ADN2816ACPZAnalog Devices Inc.
32-WFQFN Exposed Pad, CSP
32
3.3 V
ROHS3 Compliant
3.3 V
3V ~ 3.6V
3 (168 Hours)
1
ADN2814ACPZ
VS
ADN2816ACPZ
- ADN2816ACPZ-500RL7Analog Devices Inc.
32-WFQFN Exposed Pad, CSP
32
3.3 V
ROHS3 Compliant
3.3 V
3V ~ 3.6V
3 (168 Hours)
1
ADN2814ACPZ
VS
ADN2816ACPZ-500RL7
- ADN2816ACPZ-RL7Analog Devices Inc.
32-WFQFN Exposed Pad, CSP
32
3.3 V
ROHS3 Compliant
3.3 V
3V ~ 3.6V
3 (168 Hours)
1
ADN2814ACPZ
VS
ADN2816ACPZ-RL7
Aztec Electronics's Payment Terms
Aztec Electronics offers many types of payment options, and support in multiple currencies such as GBP, US dollars, RMB, etc. As relationships are built, payment plans can be established so that payments can be made on a predetermined time frame after receipt of the invoice.
T/T IN ADVANCE (Pay at time of order placement via wire transfer)
How to Ship Electronic Components?
We take great care when shipping electronics overseas. Both the U.S. and U.K. governments have imposed restrictions on air transport of electronics, according to the International Air Transport Association.
1. Understand the shipping rules of the destination country
Different countries have different regulations for shipping electronic equipment, check for certain certifications, and read the destination country's guidelines before shipping to prevent delays or confiscation of goods by customs.
2. Choose a reliable express logistics provider
From providing pick-up service to checking the status with real-time order number, conveniently track packages. At present, the logistics providers we cooperate with more include DHL, UPS, Fedex, TXT.
Of course, if you have a long-term cooperative freight forwarder or your own company's logistics account, you can pick up the goods directly from our warehouse
3. How much does it cost to ship the electronic components?
The shipping cost of electronic products depends on the size and weight of the package and the shipping distance. You can first ask us about the size/weight of the products we sell to estimate the shipping cost.
4. How long does it take to ship the electronic components?
If electronic component in stock, it is usually shipped before 5 o'clock on the same day, and it usually takes 5-10 working days to complete it by international express.
If it is a scheduled component, it needs to wait for the arrival of the parts, and then it will be inspected before delivery. If there are special circumstances, the sales staff will confirm with you. Weekends and holidays will also affect the delivery time of electronic products.
1. We provide 365 days warranty for all electronic components.
2. If you need a test report, please let us know. We have a long-term cooperative testing laboratory. If you have familiar testing laboratory, we can also ship to your designated laboratory for testing.
3. Where does Aztec Electronics mainly purchase electronic components from?
Distributors, free market, 48 global large-scale OEM factories in close contact with us (Great Price advantage, 100% original)
2.Are the ND-1's ADN2814ACPZ price and stock displayed on the website accurate?
Aztec Electronics inventory fluctuates greatly and cannot be updated in time, it is recommended to confirm the order with Aztec Electronics salesperson or online customer service before payment.
You Also Ask
- How to test electronic components and quality inspections?
- How to transport your electronic components safely?
Need Any Service, please feel free contact us.
After the electronic components have passed the quality inspection of Aztec Electronics, there are generally the following five packaging forms for electronic components: Tape, Tube, Tray, Bulk and Ammo.
Tape/Reel | Tube | Tray | Bulk | Ammo |
Weave bulk chips into tapes and pack them into reels through SMD components packaging Tape Machine. Reel is the most commonly used. | When packaging, arrange the components in the same direction and put them into plastic tubes one at a time. | Choose tray package with the same specifications as the original manufacturer, put the components into the tray and use the strapping machine. | Bulk packaging means that the SMD components are freely packaged in a formed plastic box or bag. | Adhesive tape cut continuously in predetermined quantities. The cut strips are placed in boxes for safekeeping. |
Choose electronic components that are vacuum-sealed against water, dust, moisture, oxidation, corrosion, and even UV or RF pollution.
How to pack electronic components in cartons?
1. Choose the right box for your electronic components2. Use anti-static bubble film protect electronic component
3. Put it into the box, no buffer dead corner, 360-degree package.
4. Labeled as fragile to ensure that the courier knows what needs to be done with the package.
