Analog Devices Inc. AD9833BRMZ
AD9833BRMZ
Analog Devices Inc. AD9833BRMZ information
Type
Parameter
Factory Lead Time
12 Weeks
Lifecycle Status
PRODUCTION (Last Updated: 2 weeks ago)
Contact Plating
Tin
Mount
Surface Mount
Mounting Type
Surface Mount
Package / Case
10-TFSOP, 10-MSOP (0.118, 3.00mm Width)
Number of Pins
10
Operating Temperature
-40°C~105°C
Packaging
Tube
JESD-609 Code
e3
Pbfree Code
no
Part Status
Active
Moisture Sensitivity Level (MSL)
1 (Unlimited)
Number of Terminations
10
Termination
SMD/SMT
ECCN Code
EAR99
Subcategory
DSP Peripherals
Technology
CMOS
Voltage - Supply
2.3V~5.5V
Terminal Position
DUAL
Terminal Form
GULL WING
Peak Reflow Temperature (Cel)
260
Supply Voltage
2.5V
Terminal Pitch
0.5mm
Frequency
25MHz
Reflow Temperature-Max (s)
30
Base Part Number
AD9833
Pin Count
10
Output Type
Voltage
Power Supplies
2.5/5V
Interface
Serial
Operating Supply Current
5.5mA
Nominal Supply Current
10μA
Power Dissipation
27.5mW
Max Supply Current
5.5mA
uPs/uCs/Peripheral ICs Type
DSP PERIPHERAL, NUMERIC CONTROLLED OSCILLATOR
Sampling Rate
25 Msps
Boundary Scan
NO
Low Power Mode
YES
Nominal Output Voltage
650mV
Signal to Noise Ratio (SNR)
60 dB
Number of D/A Converters
1
Resolution (Bits)
10 b
Tuning Word Width (Bits)
28b
Height
850μm
Length
3mm
Width
3mm
Radiation Hardening
No
REACH SVHC
No SVHC
RoHS Status
ROHS3 Compliant
Lead Free
Contains Lead
- Datasheets :
- ConflictMineralStatement :
analogdeviceslineartechnology-lt5400bhms8e8trpbf-conflictmineralstatement-8771.pdf
AD9833BRMZ Overview
10-TFSOP, 10-MSOP (0.118, 3.00mm Width) includes it as part of its package.Currently, there is a package in the way of Tube.Surface Mount is mounted in the way.In order for it to operate, it requires a voltage supply of 2.3V~5.5V.In this electrical device, the operating temperature is -40°C~105°C.There is a 10 pin count on this device.As an alternative to 10 terminations, there are devices that match the characteristic impedance of transmission lines.In this electrical device, the peak reflow temperature (Cel) is 260.A voltage of 2.5V is required to operate this electrical device.It is possible to determine the related parts of a base part number.10 pins are pronged contacts located on the signal interface of a computer or other communication device.Surface Mount mounted in the way.It operates at a frequency of 25MHz.There is a nominal supply current of 10μA.There is a maximum current supply for its operation of 5.5mA.In this DC switching regulator, a supply current of 5.5mA is used to operate it.uPs/uCs/Peripheral ICs type for this electrical device is DSP PERIPHERAL, NUMERIC CONTROLLED OSCILLATOR.DSP Peripherals contains this part.The device is powered by 2.5/5V power supplies.In the configuration, Voltage is used as the output.It is necessary to distinguish between a 1 D/A converter, which converts digital signals into analog form, and an A/D converter, which converts analog signals into digital form.
AD9833BRMZ Features
10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package
10 pin count
10 pins
2.5/5V power supplies
1 D/A converters
AD9833BRMZ Applications
There are a lot of Analog Devices Inc. AD9833BRMZ DDS applications.
- Telecom and datacom networking applications
- Gigabit Ethernet
- Clock radio
- Cable network front end
- Interconnection between switches and computers
- Tuner
- Thermal management
- interconnection between computers
- Wireless teaching
- Indoor ad hoc meeting
- ImagePart NumberManufacturerPackage / CaseNumber of PinsSupply VoltageTerminal PitchMountNumber of TerminationsTerminal PositionPin CountView Compare
AD9833BRMZ
Analog Devices Inc.10-TFSOP, 10-MSOP (0.118, 3.00mm Width)
10
2.5 V
0.5 mm
Surface Mount
10
DUAL
10
LMV823ISTSTMicroelectronics10-TFSOP, 10-MSOP (0.118, 3.00mm Width)
10
2.7 V
0.5 mm
Surface Mount
10
DUAL
10
AD9833BRMZ
VS
LMV823IST
- LMV823AISTSTMicroelectronics
10-TFSOP, 10-MSOP (0.118, 3.00mm Width)
10
2.7 V
0.5 mm
Surface Mount
10
DUAL
10
AD9833BRMZ
VS
LMV823AIST
- SSM2167-1RMZ-REELAnalog Devices Inc.
10-TFSOP, 10-MSOP (0.118, 3.00mm Width)
10
-
0.5 mm
Surface Mount
10
DUAL
10
AD9833BRMZ
VS
SSM2167-1RMZ-REEL
MCP665T-E/UNMicrochip Technology10-TFSOP, 10-MSOP (0.118, 3.00mm Width)
10
2.5 V
0.5 mm
Surface Mount
10
DUAL
10
AD9833BRMZ
VS
MCP665T-E/UN
Aztec Electronics's Payment Terms
Aztec Electronics offers many types of payment options, and support in multiple currencies such as GBP, US dollars, RMB, etc. As relationships are built, payment plans can be established so that payments can be made on a predetermined time frame after receipt of the invoice.
T/T IN ADVANCE (Pay at time of order placement via wire transfer)
How to Ship Electronic Components?
We take great care when shipping electronics overseas. Both the U.S. and U.K. governments have imposed restrictions on air transport of electronics, according to the International Air Transport Association.
1. Understand the shipping rules of the destination country
Different countries have different regulations for shipping electronic equipment, check for certain certifications, and read the destination country's guidelines before shipping to prevent delays or confiscation of goods by customs.
2. Choose a reliable express logistics provider
From providing pick-up service to checking the status with real-time order number, conveniently track packages. At present, the logistics providers we cooperate with more include DHL, UPS, Fedex, TXT.
Of course, if you have a long-term cooperative freight forwarder or your own company's logistics account, you can pick up the goods directly from our warehouse
3. How much does it cost to ship the electronic components?
The shipping cost of electronic products depends on the size and weight of the package and the shipping distance. You can first ask us about the size/weight of the products we sell to estimate the shipping cost.
4. How long does it take to ship the electronic components?
If electronic component in stock, it is usually shipped before 5 o'clock on the same day, and it usually takes 5-10 working days to complete it by international express.
If it is a scheduled component, it needs to wait for the arrival of the parts, and then it will be inspected before delivery. If there are special circumstances, the sales staff will confirm with you. Weekends and holidays will also affect the delivery time of electronic products.
1. We provide 365 days warranty for all electronic components.
2. If you need a test report, please let us know. We have a long-term cooperative testing laboratory. If you have familiar testing laboratory, we can also ship to your designated laboratory for testing.
3. Where does Aztec Electronics mainly purchase electronic components from?
Distributors, free market, 48 global large-scale OEM factories in close contact with us (Great Price advantage, 100% original)
2.Are the ND-1's AD9833BRMZ price and stock displayed on the website accurate?
Aztec Electronics inventory fluctuates greatly and cannot be updated in time, it is recommended to confirm the order with Aztec Electronics salesperson or online customer service before payment.
You Also Ask
- How to test electronic components and quality inspections?
- How to transport your electronic components safely?
Need Any Service, please feel free contact us.
After the electronic components have passed the quality inspection of Aztec Electronics, there are generally the following five packaging forms for electronic components: Tape, Tube, Tray, Bulk and Ammo.
Tape/Reel | Tube | Tray | Bulk | Ammo |
Weave bulk chips into tapes and pack them into reels through SMD components packaging Tape Machine. Reel is the most commonly used. | When packaging, arrange the components in the same direction and put them into plastic tubes one at a time. | Choose tray package with the same specifications as the original manufacturer, put the components into the tray and use the strapping machine. | Bulk packaging means that the SMD components are freely packaged in a formed plastic box or bag. | Adhesive tape cut continuously in predetermined quantities. The cut strips are placed in boxes for safekeeping. |
Choose electronic components that are vacuum-sealed against water, dust, moisture, oxidation, corrosion, and even UV or RF pollution.
How to pack electronic components in cartons?
1. Choose the right box for your electronic components2. Use anti-static bubble film protect electronic component
3. Put it into the box, no buffer dead corner, 360-degree package.
4. Labeled as fragile to ensure that the courier knows what needs to be done with the package.
