Littelfuse Inc. 59135-010
59135-010
Littelfuse Inc. 59135-010 information
Type
Parameter
Factory Lead Time
13 Weeks
Mount
Chassis Mount, Screw
Package / Case
Flange Mount
Number of Pins
2
Insulation Material
Teflon
Actuator Material
Magnet
Operating Temperature
-40°C~105°C TA
Packaging
Bulk
Published
2001
Series
59135
Part Status
Active
Moisture Sensitivity Level (MSL)
1 (Unlimited)
Termination
Wire Leads
Type
Reed Switch
Voltage - Rated DC
200V
Current Rating
500mA
Termination Style
Wire Leads
Output Type
SPST-NO
Nominal Supply Current
500mA
Throw Configuration
SPST
Switching Voltage
200V
Sensing Method
Magnetic
Must Operate
8.89mm
Switching Capacity
10 W
Must Release
29.21mm
Height
19mm
Length
19.05mm
Width
6.35mm
Radiation Hardening
No
REACH SVHC
No SVHC
RoHS Status
ROHS3 Compliant
Lead Free
Lead Free
- Datasheets :
- Environmental Information :
59135-010 Overview
Magnetic position sensors are packaged in Flange Mount packages. For protection against damage, this electronic part is packaged in the Bulk. A sensor module has a pin count of 2. Sensor modules in general draw 500mA current. The rated voltage value for sensor modules should be 200V in the DC circuit.
59135-010 Features
Package / Case: Flange Mount
59135 Series
Operating Temperature: -40°C~105°C TA
2 Pins
59135-010 Applications
There are a lot of Littelfuse Inc. 59135-010 Magnetic Position Sensors Modules applications.
- Reed switch replacement
- Lighting actuation slave sensor
- Exercise equipment
- Reading of magnetic data storage media
- Navigation
- End of travel and index sensors
- Speed and RPM (revolutions per minute) sensing
- Magnetic encoders
- Clutch/brake position sensor
- Tachometers/counters
Aztec Electronics's Payment Terms
Aztec Electronics offers many types of payment options, and support in multiple currencies such as GBP, US dollars, RMB, etc. As relationships are built, payment plans can be established so that payments can be made on a predetermined time frame after receipt of the invoice.
T/T IN ADVANCE (Pay at time of order placement via wire transfer)
How to Ship Electronic Components?
We take great care when shipping electronics overseas. Both the U.S. and U.K. governments have imposed restrictions on air transport of electronics, according to the International Air Transport Association.
1. Understand the shipping rules of the destination country
Different countries have different regulations for shipping electronic equipment, check for certain certifications, and read the destination country's guidelines before shipping to prevent delays or confiscation of goods by customs.
2. Choose a reliable express logistics provider
From providing pick-up service to checking the status with real-time order number, conveniently track packages. At present, the logistics providers we cooperate with more include DHL, UPS, Fedex, TXT.
Of course, if you have a long-term cooperative freight forwarder or your own company's logistics account, you can pick up the goods directly from our warehouse
3. How much does it cost to ship the electronic components?
The shipping cost of electronic products depends on the size and weight of the package and the shipping distance. You can first ask us about the size/weight of the products we sell to estimate the shipping cost.
4. How long does it take to ship the electronic components?
If electronic component in stock, it is usually shipped before 5 o'clock on the same day, and it usually takes 5-10 working days to complete it by international express.
If it is a scheduled component, it needs to wait for the arrival of the parts, and then it will be inspected before delivery. If there are special circumstances, the sales staff will confirm with you. Weekends and holidays will also affect the delivery time of electronic products.
1. We provide 365 days warranty for all electronic components.
2. If you need a test report, please let us know. We have a long-term cooperative testing laboratory. If you have familiar testing laboratory, we can also ship to your designated laboratory for testing.
3. Where does Aztec Electronics mainly purchase electronic components from?
Distributors, free market, 48 global large-scale OEM factories in close contact with us (Great Price advantage, 100% original)
2.Are the Littelfuse's 59135-010 price and stock displayed on the website accurate?
Aztec Electronics inventory fluctuates greatly and cannot be updated in time, it is recommended to confirm the order with Aztec Electronics salesperson or online customer service before payment.
You Also Ask
- How to test electronic components and quality inspections?
- How to transport your electronic components safely?
Need Any Service, please feel free contact us.
After the electronic components have passed the quality inspection of Aztec Electronics, there are generally the following five packaging forms for electronic components: Tape, Tube, Tray, Bulk and Ammo.
Tape/Reel | Tube | Tray | Bulk | Ammo |
Weave bulk chips into tapes and pack them into reels through SMD components packaging Tape Machine. Reel is the most commonly used. | When packaging, arrange the components in the same direction and put them into plastic tubes one at a time. | Choose tray package with the same specifications as the original manufacturer, put the components into the tray and use the strapping machine. | Bulk packaging means that the SMD components are freely packaged in a formed plastic box or bag. | Adhesive tape cut continuously in predetermined quantities. The cut strips are placed in boxes for safekeeping. |
Choose electronic components that are vacuum-sealed against water, dust, moisture, oxidation, corrosion, and even UV or RF pollution.
How to pack electronic components in cartons?
1. Choose the right box for your electronic components2. Use anti-static bubble film protect electronic component
3. Put it into the box, no buffer dead corner, 360-degree package.
4. Labeled as fragile to ensure that the courier knows what needs to be done with the package.
