Rochester Electronics, LLC CY2304SC-2
CY2304SC-2
Please send RFQ , we will respond immediately.
Rochester Electronics, LLC CY2304SC-2 information
Type
Parameter
Mounting Type
Surface Mount
Package / Case
8-SOIC (0.154, 3.90mm Width)
Surface Mount
YES
Operating Temperature
0°C~70°C
Packaging
Tube
JESD-609 Code
e0
Pbfree Code
no
Part Status
Obsolete
Moisture Sensitivity Level (MSL)
3 (168 Hours)
Number of Terminations
8
Type
Fanout Buffer (Distribution), Zero Delay Buffer
Terminal Finish
TIN LEAD
Technology
CMOS
Voltage - Supply
3V~3.6V
Terminal Position
DUAL
Terminal Form
GULL WING
Peak Reflow Temperature (Cel)
220
Number of Functions
1
Supply Voltage
3.3V
Reach Compliance Code
unknown
Reflow Temperature-Max (s)
NOT SPECIFIED
Pin Count
8
JESD-30 Code
R-PDSO-G8
Qualification Status
COMMERCIAL
Supply Voltage-Max (Vsup)
3.6V
Supply Voltage-Min (Vsup)
3V
Number of Circuits
1
Frequency (Max)
133.3MHz
Family
2304
Output Characteristics
3-STATE
Input
Clock
Ratio - Input:Output
1:4
PLL
Yes
Differential - Input:Output
No/No
Divider/Multiplier
Yes/Yes
Same Edge Skew-Max (tskwd)
0.2 ns
Number of True Outputs
4
Length
4.889mm
Width
3.8985mm
RoHS Status
Non-RoHS Compliant
- Datasheets :
CY2304SC-2 Overview
A clock integrated circuit is packaged in a Tube-shaped package because it is for use as a clock. A Clock PLL is included with the 8-SOIC (0.154, 3.90mm Width) package. The peak reflow temperature (Cel) amounts to 220 to be essentially indestructible. There are a total of 8 terminations in this file. To operate this time clock generator, 3.3V voltage should be applied. There is a Clock PLL called Clock which is designed to be the input to this clock generator. There are 1 circuits implemented in order to achieve full performance from this electronic part. An up to 133.3MHz frequency is provided by this clock-based RF synthesizer. The Surface Mount allows the electrical component to be installed conveniently on the panel. The maximal supply voltage (Vsup) reaches 3.6V. In order to maintain safety, this frequency generator should be supplied with voltages above 3V. As long as there are 3V~3.6V supply voltages provided, clock generator ic should work. Using the test statistics, it is estimated that the ambient temperature should be set to 0°C~70°C. This is an electronic part that can be classified as a Fanout Buffer (Distribution), Zero Delay Buffer in this case. Clock PLL is equipped with 8 pin count. Low timing skew is offered by this RF synthesizer at maximum 0.2 ns. The digital clock generator has 4 high-enable output pins. You can find similar clock generators by searching for the 2304 family.
CY2304SC-2 Features
Available in the 8-SOIC (0.154, 3.90mm Width)
Supply voltage of 3.3V
4 true outputs
CY2304SC-2 Applications
There are a lot of Rochester Electronics, LLC CY2304SC-2 Clock Generators applications.
- Quenching?
- Mobile telephones
- MRI
- Satellite receivers
- Modems
- Cell phones
- Frequency synthesis
- FMCW Radar
- Local oscillator source in receiver
- Skew suppression
Aztec Electronics's Payment Terms
Aztec Electronics offers many types of payment options, and support in multiple currencies such as GBP, US dollars, RMB, Rubles, etc. As relationships are built, payment plans can be established so that payments can be made on a predetermined time frame after receipt of the invoice.
T/T IN ADVANCE (Pay at time of order placement via wire transfer)
How to Ship Electronic Components?
We take great care when shipping electronics overseas. Both the U.S. and U.K. governments have imposed restrictions on air transport of electronics, according to the International Air Transport Association.
1. Understand the shipping rules of the destination country
Different countries have different regulations for shipping electronic equipment, check for certain certifications, and read the destination country's guidelines before shipping to prevent delays or confiscation of goods by customs.
2. Choose a reliable express logistics provider
From providing pick-up service to checking the status with real-time order number, conveniently track packages. At present, the logistics providers we cooperate with more include DHL, UPS, Fedex, TXT, SF Express.
Of course, if you have a long-term cooperative freight forwarder or your own company's logistics account, you can pick up the goods directly from our warehouse
3. How much does it cost to ship the electronic components?
The shipping cost of electronic products depends on the size and weight of the package and the shipping distance. You can first ask us about the size/weight of the products we sell to estimate the shipping cost.
4. How long does it take to ship the electronic components?
If electronic component in stock, it is usually shipped before 5 o'clock on the same day, and it usually takes 5-10 working days to complete it by international express.
If it is a scheduled component, it needs to wait for the arrival of the parts, and then it will be inspected before delivery. If there are special circumstances, the sales staff will confirm with you. Weekends and holidays will also affect the delivery time of electronic products.
1. We provide 365 days warranty for all electronic components.
2. If you need a test report, please let us know. We have a long-term cooperative testing laboratory. If you have familiar testing laboratory, we can also ship to your designated laboratory for testing.
3. Where does Aztec Electronics mainly purchase electronic components from?
Distributors, free market, 48 global large-scale OEM factories in close contact with us (Great Price advantage, 100% original)
2.Are the Rochester Electronics's CY2304SC-2 price and stock displayed on the website accurate?
Aztec Electronics inventory fluctuates greatly and cannot be updated in time, it is recommended to confirm the order with Aztec Electronics salesperson or online customer service before payment.
You Also Ask
- How to test electronic components and quality inspections?
- How to transport your electronic components safely?
Need Any Service, please feel free contact us.
After the electronic components have passed the quality inspection of Aztec Electronics, there are generally the following five packaging forms for electronic components: Tape, Tube, Tray, Bulk and Ammo.
Tape/Reel | Tube | Tray | Bulk | Ammo |
Weave bulk chips into tapes and pack them into reels through SMD components packaging Tape Machine. Reel is the most commonly used. | When packaging, arrange the components in the same direction and put them into plastic tubes one at a time. | Choose tray package with the same specifications as the original manufacturer, put the components into the tray and use the strapping machine. | Bulk packaging means that the SMD components are freely packaged in a formed plastic box or bag. | Adhesive tape cut continuously in predetermined quantities. The cut strips are placed in boxes for safekeeping. |
Choose electronic components that are vacuum-sealed against water, dust, moisture, oxidation, corrosion, and even UV or RF pollution.
How to pack electronic components in cartons?
1. Choose the right box for your electronic components2. Use anti-static bubble film protect electronic component
3. Put it into the box, no buffer dead corner, 360-degree package.
4. Labeled as fragile to ensure that the courier knows what needs to be done with the package.
