Analog Devices Inc. ADG442BRZ
ADG442BRZ
Analog Devices Inc. ADG442BRZ information
Type
Parameter
Factory Lead Time
8 Weeks
Lifecycle Status
PRODUCTION (Last Updated: 2 weeks ago)
Contact Plating
Tin
Mounting Type
Surface Mount
Package / Case
16-SOIC (0.154, 3.90mm Width)
Surface Mount
YES
Number of Pins
16
Operating Temperature
-40°C~85°C TA
Packaging
Tube
JESD-609 Code
e3
Pbfree Code
no
Part Status
Active
Moisture Sensitivity Level (MSL)
1 (Unlimited)
Number of Terminations
16
Termination
SMD/SMT
ECCN Code
EAR99
Resistance
70Ohm
Subcategory
Multiplexer or Switches
Max Power Dissipation
600mW
Technology
CMOS
Terminal Form
GULL WING
Peak Reflow Temperature (Cel)
260
Number of Functions
4
Supply Voltage
15V
Terminal Pitch
1.27mm
Reflow Temperature-Max (s)
30
Base Part Number
ADG442
Pin Count
16
Operating Supply Voltage
12V
Polarity
Non-Inverting
Number of Channels
4
Interface
Parallel
Max Supply Voltage
25V
Min Supply Voltage
10.8V
Nominal Supply Current
80μA
Power Dissipation
1.2mW
Max Supply Current
80μA
Throw Configuration
SPST
Turn On Delay Time
110 ns
Voltage - Supply, Single/Dual (±)
12V ±15V
Supply Type
Dual, Single
Neg Supply Voltage-Nom (Vsup)
-15V
Turn-Off Delay Time
60 ns
Max Dual Supply Voltage
22V
On-State Resistance (Max)
70Ohm
Min Dual Supply Voltage
13.5V
High Level Output Current
30mA
Dual Supply Voltage
15V
Multiplexer/Demultiplexer Circuit
1:1
Off-state Isolation-Nom
60 dB
Current - Leakage (IS(off)) (Max)
500pA
Channel Capacitance (CS(off), CD(off))
4pF 4pF
On-state Resistance Match-Nom
1Ohm
Switch Circuit
SPST - NO
Switch Time (Ton, Toff) (Max)
110ns, 60ns
Charge Injection
1pC
Crosstalk
-100dB @ 1MHz
Switching
BREAK-BEFORE-MAKE
Normal Position
NO
Height
1.5mm
Length
10mm
Width
4mm
Radiation Hardening
No
REACH SVHC
No SVHC
RoHS Status
ROHS3 Compliant
Lead Free
Contains Lead
- Datasheets :
- Design Resources :
- ConflictMineralStatement :
analogdeviceslineartechnology-lt5400bhms8e8trpbf-conflictmineralstatement-8771.pdf
ADG442BRZ Overview
The electronic part can be shipped overseas conveniently because it is packaged in 16-SOIC (0.154, 3.90mm Width). To ensure high reliability, a new packaging method Tube is used. The multiplexer is located in Surface Mount. Multiplexer and demultiplexer circuits have a number 1:1. Around -40°C~85°C TA is the extended operating temperature. A total of 16 terminations have been recorded. A high-quality output is provided by the electrical component's 4 channels. If the voltage supply is 15V volts, the electrical component should be turned on and run. This electronic part can be found in the 16 series. Based on SPST - NO switching circuits, these analog multiplexers work. Try searching for the analog switch ic with ADG442 if you are looking for variants. In this multiplexer, the internal resistance is 70Ohm. To find out what the 16 pins do, please refer to the datasheets. It is a typical Multiplexer or Switches analog multiplexer. It is normally recommended that users do not supply the multiplexer with voltages higher than 25V. Analog switch ics with Dual, Single supply type are cost-effective. A low voltage of 10.8V should be applied to the electronic component. The analogue multiplexer may be damaged if voltage is greater than 80μA. If put voltage greater than 22V on the multiplexer, damage may be caused to the device. When using dual power supplies, you should attach at least 13.5V. There is a voltage range of 12V operating voltages for the electrical part.
ADG442BRZ Features
4 Channels
Switch Circuit: SPST - NO
ADG442BRZ Applications
There are a lot of Analog Devices Inc. ADG442BRZ Analog Switches & Multiplexers ICs applications.
- SDH/SONET multiplexers
- Data switching
- Video signal routing
- Precision data acquisition
- RGB switches
- New designs requiring multiplexer functions
- DVD-R
- Imaging
- Digital access cross connects
- Private Branch Exchange (PBX)
- ImagePart NumberManufacturerPackage / CaseNumber of PinsInterfaceMin Dual Supply VoltageMin Supply VoltageSupply VoltageMax Dual Supply VoltageMax Supply VoltageView Compare
ADG442BRZ
Analog Devices Inc.16-SOIC (0.154, 3.90mm Width)
16
Parallel
13.5 V
10.8 V
15 V
22 V
25 V
- ADG441BRZ-REELAnalog Devices Inc.
16-SOIC (0.154, 3.90mm Width)
16
Parallel
13.5 V
10.8 V
15 V
22 V
25 V
ADG442BRZ
VS
ADG441BRZ-REEL
- ADG444BRZAnalog Devices Inc.
16-SOIC (0.154, 3.90mm Width)
16
Parallel
13.5 V
10.8 V
15 V
22 V
25 V
ADG442BRZ
VS
ADG444BRZ
- ADG441BRZAnalog Devices Inc.
16-SOIC (0.154, 3.90mm Width)
16
Parallel
13.5 V
10.8 V
15 V
22 V
25 V
ADG442BRZ
VS
ADG441BRZ
Aztec Electronics's Payment Terms
Aztec Electronics offers many types of payment options, and support in multiple currencies such as GBP, US dollars, RMB, etc. As relationships are built, payment plans can be established so that payments can be made on a predetermined time frame after receipt of the invoice.
T/T IN ADVANCE (Pay at time of order placement via wire transfer)
How to Ship Electronic Components?
We take great care when shipping electronics overseas. Both the U.S. and U.K. governments have imposed restrictions on air transport of electronics, according to the International Air Transport Association.
1. Understand the shipping rules of the destination country
Different countries have different regulations for shipping electronic equipment, check for certain certifications, and read the destination country's guidelines before shipping to prevent delays or confiscation of goods by customs.
2. Choose a reliable express logistics provider
From providing pick-up service to checking the status with real-time order number, conveniently track packages. At present, the logistics providers we cooperate with more include DHL, UPS, Fedex, TXT.
Of course, if you have a long-term cooperative freight forwarder or your own company's logistics account, you can pick up the goods directly from our warehouse
3. How much does it cost to ship the electronic components?
The shipping cost of electronic products depends on the size and weight of the package and the shipping distance. You can first ask us about the size/weight of the products we sell to estimate the shipping cost.
4. How long does it take to ship the electronic components?
If electronic component in stock, it is usually shipped before 5 o'clock on the same day, and it usually takes 5-10 working days to complete it by international express.
If it is a scheduled component, it needs to wait for the arrival of the parts, and then it will be inspected before delivery. If there are special circumstances, the sales staff will confirm with you. Weekends and holidays will also affect the delivery time of electronic products.
1. We provide 365 days warranty for all electronic components.
2. If you need a test report, please let us know. We have a long-term cooperative testing laboratory. If you have familiar testing laboratory, we can also ship to your designated laboratory for testing.
3. Where does Aztec Electronics mainly purchase electronic components from?
Distributors, free market, 48 global large-scale OEM factories in close contact with us (Great Price advantage, 100% original)
2.Are the ND-1's ADG442BRZ price and stock displayed on the website accurate?
Aztec Electronics inventory fluctuates greatly and cannot be updated in time, it is recommended to confirm the order with Aztec Electronics salesperson or online customer service before payment.
You Also Ask
- How to test electronic components and quality inspections?
- How to transport your electronic components safely?
Need Any Service, please feel free contact us.
After the electronic components have passed the quality inspection of Aztec Electronics, there are generally the following five packaging forms for electronic components: Tape, Tube, Tray, Bulk and Ammo.
Tape/Reel | Tube | Tray | Bulk | Ammo |
Weave bulk chips into tapes and pack them into reels through SMD components packaging Tape Machine. Reel is the most commonly used. | When packaging, arrange the components in the same direction and put them into plastic tubes one at a time. | Choose tray package with the same specifications as the original manufacturer, put the components into the tray and use the strapping machine. | Bulk packaging means that the SMD components are freely packaged in a formed plastic box or bag. | Adhesive tape cut continuously in predetermined quantities. The cut strips are placed in boxes for safekeeping. |
Choose electronic components that are vacuum-sealed against water, dust, moisture, oxidation, corrosion, and even UV or RF pollution.
How to pack electronic components in cartons?
1. Choose the right box for your electronic components2. Use anti-static bubble film protect electronic component
3. Put it into the box, no buffer dead corner, 360-degree package.
4. Labeled as fragile to ensure that the courier knows what needs to be done with the package.
